Vihr FM-1900
Diamond Core Bits & Milling Cutters1893
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 50 • Dia Imperial: 1 31/32 • Cut Length Metric: 25 • Overall Length Metric: 63
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 7 more→.5 • Dia Imperial: 19/64 • Cut Length Metric: 19 • Overall Length Metric: 51
 |
Trend Craft Pro 1/4in shank recessing cutter - 20mm width Two Flute Carbide tips. Specialist cutter to cut double rebates for fitting Tonk strip bookcase supports, for fast, efficient performance. C more→uts the wider top rebates for the strip and the lower clearance groove in a single pass for accurate professional appearance every time. 1/4in shank ideal for smaller routers for easy control using straight edges and template guides. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: 9.5 …
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 11 • Dia Imperial: 7/16 • Cut Length Metric: 25 • Overall Length Metric: 57
 |
These are ideal for engraving and decorative panel work. Made with Solid Tungsten Carbide inserts, with two flutes. Specifications • Shank Diameter: 8 mm • Dia Metric: 6.3 • Dia Impe more→rial: 1/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 64.5 • Radius 1 Metric: 3.2 • Radius 1 Imperial: 1/8
 |
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised P more→anel cutters run best at lower speeds and match our range of profile scribers. All are suitable for use on natural timber and MDF. 8mm hank tools are for use with medium and heavy duty routers only. Suitable for use with Ref. PSC/2. Specifications • Shank Diameter: 1/2 • Dia Metric: 85.7 • Cut Length Metric: 15.9 • Overall Length Metric: 75 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 22.2
 |
An initial cut with a straight cutter is required to produce the drawer pull profile. Specifications • Shank Diameter: 1/2 • Dia Metric: 38 • Dia2 Metric: 22 • Cut Length Metric: more→17 • Overall Length Metric: 61 • Radius 1 Metric: 6
 |
The Trend Countersink Set contains five heat treated tool steel countersinks with hex shafts. They are fitted with High Speed Steel drill bits to cover the full range of screw sizes and are self clear more→ing. They are adjustable for different length screws and will produce a 9.5mm (3/8in) or 12.7mm (1/2in) diameter counterbored hole to fit standard woodplugs. Contains: 1 x 2.0mm (5/64in) Drill and C/S Size No.4.1 x 2.4mm (3/32in) Drill and C/S Size No.6.1 x 2.8mm (7/64in) Drill and C/S Size. No.8.1 x 3.2mm (1/8in) Drill and C/S Size. No.10.1 x 3.6mm (9/64in) Drill and C/S Size. No.12.Tungsten carbide tipped version these tools can be used in abrasive materials such as laminated chipboard. The …
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
