Vihr UShM-125/800 (72/12/9)
Cutting Discs237
 |
Zirconium flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. More durable than aluminium oxide flap discs. Abrasive flaps are attached to rigid dis more→c with epoxy adhesive - does not require backing pad. Depressed centre disc suitable for electric and air tools. Features & Benefits: • Zirconium flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. • More durable than aluminium oxide flap discs. • Abrasive flaps attached to rigid disc with epoxy adhesive - does not require backing pad. • Depressed centre disc suitable for electric and air tools. • Size/Bore: Ø125/22mm. • Model No. FD12560 Spe…
 |
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs the more→y also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Si
 |
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …
 |
Reilable Performance in Stone - The standard for stone cutting disc cuts reliably in stone. It features a good silicon carbide and resin blade specifically designed for work on stone. The product is i more→ntended for work on stone. For use with Bosch angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reilable Performance in Stone • Standard for Stone cutting disc cuts reliably in stone • The silicon carbide and resin blade is specifically designed for work on stone Specifications Specification: C 30 S BF Diameter: 125mm Bore size: 22,23mm Thickness: …
 |
• For light grinding work. Thanks to the flexibility of the disc, it is ideally suited to working on curved surfaces. Other advantages of the disc: less vibration and noise development, cool grin more→ding (less heat discolouration)
 |
Excellent Lifetime - The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-fr
 |
Powerful Fast Cutting - The Multi Construction Rapido Cutting Disc provides powerful and fast cutting performance across various materials. Its special abrasive mix enables work on various materials. more→In addition, the thin disc offers easy and fast cutting with little force exertion, less noise and minimum dust. Use this disc for cutting metal, Inox, non-ferrous metals, stone, marble and plastic. It is compatible with angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413, FEPA and oSa. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Fast Cutting Performance • Multi Construction Rapido Cutting Disc for fast …
 |
The Turbo Rim design enhances cutting speed and efficiency, reducing vibration and providing a smoother, cleaner cut. Its advanced diamond technology ensures extended tool life and superior cutting po more→wer, making it perfect for heavy-duty applications. Compatible with standard angle grinders and saws, the Makita Diamak Turbo Rim is built for reliable performance and versatility. Features & Benefits • Ideal for concrete Specifications • Diameter: 125mm • Bore Size: 22.23mm • Quantity: 1
Wire & Cup Brushes308
 |
Price from £42.77 up to £51.99
Compare prices4→Compare prices and buy Sealey 38Pc Cleaning Brush Set Injector Bore VS1910
Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting. Set includes brass, steel and nylon brushes Ø8-19mm, Soft grip handle and one-piece 150m more→m extension. Supplied in storage case. Features: • Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting • 38-Piece set includes brass, steel and nylon brushes Ø8-19mm • Soft grip handle • One-Piece 150mm Extension • Supplied in storage case Specifications: Guarantee:1 Year Model Number: VS1910
 |
Price from £21.80 up to £24.95
Compare prices6→Compare prices and buy Lessmann 0.5 Steel Wire Knot Wheel Brush 115mm 22.2mm Bore LES472211
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, ru more→bber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 115mm.Width: 14mm.Bore: 22.2mm.Wire Gauge: 0.50.Wire Type: Steel.Max RPM: 12,500/min.Addi
 |
Price from £10.25 up to £11.95
Compare prices6→Compare prices and buy Sealey Brassed Wire Cup Brush 125mm M14 Thread CBC125
Suitable for use with power tools up to the maximum rated rpm. Crimped brassed steel filaments add extra rigidity and cleaning power. Features & Benefits: • Suitable for use with power tools up to th more→e maximum rated rpm. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. CBC125 Specifications: Model No CBC125 Brand: Sealey Diameter: Ø125mm Maximum Speed: 6500rpm Nett Weight: 0.54kg Thread: M14 x 2mm
 |
Price from £47.90 up to £53.99
Compare prices6→Compare prices and buy Lessmann Crimped Steel Wire Cup Brush 150mm M14 x 2.0 Thread LES429177
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of siz more→es and wire styles are available.Diame
 |
Price from £5.06 up to £10.99
Compare prices6→Compare prices and buy Faithfull Wire Cup Brush 80 X M14 X2 0,30Mm, Red FAIWBC80
Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for industrial use a more→nd more specialist applications. Features: For cleaning metal surfaces prior to painting M14 thread mount M14 thread mount Specifications: Dimensions: H:11.5 x W:6.0 x D:9.0 cm Colour: Red Guarantee:5 years Material: Metal Model Number: FAIWBC80
 |
Price from £36.08 up to £39.95
Compare prices5→Compare prices and buy Lessmann X Lock Non Sparking Stainless Steel Knotted Wire Wheel 115mm X-Lock 472.85X
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Stainless Steel Knot Bevel Brush 115mm Non Spark
 |
Price from £5.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Brush 70mm 6mm Shank 1609200270
Fine Finish on Steel - The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
 |
Price from £4.95
Compare prices5→Compare prices and buy Stanley Crimped Steel Wire Wheel Brush 50mm 6mm Shank STA36020
These Stanley crimped wire wheels are ideal for cleaning and preparing surfaces. They are designed for use in drill chucks and can be used with standard corded or cordless drills. The high tensile ste more→el wire is heat treated for durability. An innovative internal holding plate construction helps to reduce wire movement for increased control and longer product lifetime. Features & Benefits • For use with electric drills • Suitable for corded and cordless machines • Ideal for cleaning and surface preparation Specifications • Wheel Diameter: 50mm • Wheel Thickness: 10mm • Shank Diameter: 6mm
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
