Virutex AS93 (2700000)
Diamond Core Bits & Milling Cutters2272
 |
Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 6.3mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for clean, professional finish on timber, plastic laminates and ve more→neers. Bottom bearing guide for following an edge to trim laminates and veneers for a professional finish. 6.3mm diameter to follow more intricate curves, 1/4in shank for easy control in smaller routers. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.35 • Dia Imperial: 1/4 • …
 |
High quality 1-flute countersink bit by Wera. For countersinking and deburring. The hexagon shaft ensures very good power transfer, vibration-free and score-free working. Perfect chip removal and long more→service life. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits • Hex shaft for very good power transfer • Vibration-free and scratch-free operation ensured • Best surface quality of the countersink • Long service life • Perfect chip removal Contents 845 1-flute Countersink Bits, 12.40 x 36 mm
 |
Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. For use with smaller routers where application more→allows. Neatly cuts grooves on doors or frames to accept a weatherseal. Groove can be positioned in bottom of a rebate. Specifications • Shank Diameter: 1/4 • Dia Metric: 34 • Cut Length Metric: 3 • Overall Length Metric: 55.5 • Bearing Dia Metric: 20
 |
Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications • Shank Diameter: 1/2 • Dia Metric: 60 • Cut Length Metric: 27 • Overall Length Metric: 65 more→.1 • Radius 1 Metric: 20
 |
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Impe more→rial: 1/2 • Cut Length Metric: 6.5 • Overall Length Metric: 52.7 • Angle: 45
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 25 • Overall Length Metric: 68
 |
Smooth Countersinking - The Countersink Bit Hex-Shank performs smooth countersinking for screws and deburring of holes in soft materials. Work easily and steadily with seven 90-degree cutting edges. A more→high power-transfer due to the he -shank provides flush results, and the ground countersink made of tool steel with an optimum surface quality offers even work in wood and plastics. This drill bit has a hexagonal shank system and also works with all standard drill drivers. Hex shank for maximum power transfer in standard three-jaw drills and hexagonal drill driver chucks. Features and Benefits • Smooth Countersinking in Soft Materials • For Waxing and Polishing Various Materials • …
 |
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding. The smaller bearing gives a 3.2mm quirk. Specifications • Shank Diameter: 1/2 • Dia Metric: more→28.7 • Cut Length Metric: 13 • Overall Length Metric: 60 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3 • Radius 1 Imperial: 1/4
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
