Virutex FR156N (5600588)
Diamond Core Bits & Milling Cutters1847
 |
Ideal for posts and newel caps for stairs. Specifications • Shank Diameter: 1/4 • Dia Metric: 34.9 • Cut Length Metric: 20.6 • Overall Length Metric: 74.5 • Bearing Dia Metri more→c: 12.7 • Angle: 60
 |
Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approxim more→ate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Downcut to prevent breakout on veneer. Specifications • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 25 • Overall Length Metric: 79 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 12 mm • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 19 • Overall Length Metric: 63
 |
The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Specifications • Shank Diameter: 1/2 • Dia Metric: 27 • Cut Length Metric more→: 17 • Overall Length Metric: 65.6 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 17
 |
These countersinks are produced in High Speed Steel (HSS) and should not be confused with carbon steel types. They are designed for countersinking mild steel, iron and plastics. Multi flute design. more→Ground shank for greater running accuracy. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.5 • Overall Length Metric: 40 • Type or Grade: 5 flute
 |
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of more→anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant wax stick or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE.One Flute helical Plunge-slotting bit.8 mm Shank.D = 5 mmC = 12 mmOL = 60 mmPTDTRE50058HS
 |
Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Specifications • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperi more→al: 3/4 • Cut Length Metric: 11.1 • Overall Length Metric: 63.5 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4
 |
3 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb. Shank mounted bearing self guides the cutter along door edge. Specifications • Shank Diamet more→er: 12 mm • Dia Metric: 24.3 • Cut Length Metric: 50 • Overall Length Metric: 101 • Bearing Dia Metric: 19 • Angle: 3
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
