Virutex FR292R
Diamond Core Bits & Milling Cutters2312
 |
Classic skirting board mould with a curved return to the edge. Specifications • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 41 • Overall L more→ength Metric: 90 • Bearing Dia Metric: 16 • Radius 1 Metric: 10
 |
Long Life for Ceramics - The Diamond Cutter Dry Speed delivers long life when dry drilling hard ceramics. Its high-class diamonds provide very high drilling speeds, and its vacuum-brazing technology e more→nsures a long lifetime. This product is intended for tiles ranging from soft wall tiles to very hard floor tiles, such as stoneware. It is suitable for use with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Long Life for Hard Ceramics • Diamond Cutter Dry Speed delivers long life when dry drilling hard ceramics • High-class diamonds provide very high drilling speeds Specifications Diameter (D): 55mm Diameter (D) 2: 2 11/64" Working …
 |
For coves and part of a rule joint. Specifications • Shank Diameter: 1/4 • Dia Metric: 6 • Cut Length Metric: 15 • Overall Length Metric: 58.5 • Radius 1 Metric: 3
 |
Clarkson 02PM/04PM long series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 3.0mm - 20.0mm: Four Flutes Sizes 22.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight F more→lutes BS 122/4. Specifications • Milling Diameter: 8.5mm • Shank Diameter: 10mm • Length of Cut: 37mm • Overall Length: 82.5mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectiona
 |
A range of heavy duty 'T' slot cutters for clamping and hanging applications. Relief cut required. MEC mechanical feed only. Specifications • Shank Diameter: 1/2 • Dia Metric: 30 • D more→ia2 Metric: 10.5 • Cut Length Metric: 7 • Overall Length Metric: 60 • Radius 1 Metric: 3
 |
HSS Three Flute 90° Countersink. Specifications • Nominal Diameter: 6.0mm • Shank Diameter: 5mm • Overall Length: 45mm • Capacity: 1.5mm - 6.0mm Features and Benefits • P more→roduces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Short shank for Makita 3600B & 3 more→612BR, Ryobi and Hitachi routers. Specifications • Shank Diameter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 63 • Overall Length Metric: 100
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 50 • Cut Length Imperial: 2 • Overall Length Metric: 93
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
