Virutex FRE160P (6000200)
Diamond Core Bits & Milling Cutters2221
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 8 mm • Dia Metric: 18 • Dia Imperial: 45/64 • Cut Length Metric: 25 • Cut Length Imperial: 63/64 • Overall Length Metric: 65.5
 |
Trend Snappy 9.5mm diameter countersink - with adjustable drill 9.5mm diameter countersink for up to 10 gauge Imperial screws. The perfect, fast swap accessory for clean, consistent finishes." Ma more→de from hardened tool steel for assured performance. Ideally suited to hard and softwoods alike." Fitted with high quality 3.25mm diameter replaceable HSS (High Speed Steel) piloting drill for No 10 Imperial screws in softwood or No8 screws in hardwood. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications …
 |
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Length more→Metric: 19 • Overall Length Metric: 71 • Angle: 45
 |
Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications • Shank Diameter: 1/2 • Dia Metric: 31 • Cut Length Metric: 16 • Overall Length Metric: 54 more→.1 • Radius 1 Metric: 10
 |
Two flute for fine finish. Specially ground for cutting acrylic. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 20 • Overa more→ll Length Metric: 63
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25 • Overall Length Metric: 71
 |
These cutters are for Trend Craft Dovetail Jigs. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 20 • Overall Length Metric: more→60 • Angle: 98
 |
Long Life for Ceramics - The Diamond Cutter Dry Speed delivers long life when dry drilling hard ceramics. Its high-class diamonds provide very high drilling speeds, and its vacuum-brazing technology e more→nsures a long lifetime. This product is intended for tiles ranging from soft wall tiles to very hard floor tiles, such as stoneware. It is suitable for use with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Long Life for Hard Ceramics • Diamond Cutter Dry Speed delivers long life when dry drilling hard ceramics • High-class diamonds provide very high drilling speeds Specifications Diameter (D): 45mm Diameter (D) 2: 1 49/64" Working …
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
