Vitals Master Ra 2685DS

Expert Quality, tungsten carbide tipped straight shank drills with milled flute. Suitable for use with power drills. Manufactured to ISO 5468 specifications. Display packed.

The SDS max-9 BreakThrough Drill Bit is standard when drilling large and deep holes in concrete. Its 3-cutter tip made from fine-grade carbide is vacuum-brazed and hardened to enable fast results and more→good removal of large pieces of material. The bit´s long tapered shank makes breakthrough-drilling possible, while its 2-flute U-shape design provides good dust removal. The bit is intended for breakthroughs with diameters from 45 mm to 80 mm in concrete, masonry and limestone, e.g. for fixing cables and pipes outside. Note: Always ensure that you use hammer drills with suitable capacity for breakthrough-drill bits to avoid overload. Observe the operating instructions of the rotary hammer. It is i…

Bright below 1.0mm, 1/16".Features & Benefits• High speed steel • DIN 340 • Steam tempered • 118° point angle • Long series

The innovative DeWalt Extreme 2 SDS Plus drill bit is amongst the best available on the market in terms of speed, lifetime and endurance. Suitable for fast drilling of plug, anchor or clearance holes more→in masonry, stone, concrete and brick/block work. It features an optimised mounting shank which provides perfect grip and optimum power transmission, with a hardened steel body for extra strength and reduced breakage. Solid two cutter head is flanked by two individual cutting tips delivering a fast and efficient drilling speed. Specifications • Diameter: 16mm • Length: 160mm • Pack Quantity: 1 Features & Benefits • Superior carbide grade for long life and greater durability • …

Milwaukee HSS-G Thunderweb Drill Bit design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout thei more→r length. Even at the narrowest point the Tunderweb core is thicker than that of a standard drill bit. Specifications • Cutting Width: 8.5mm • Length: 117mm • Pack Quantity: 5Features & Benefits• Parabolic web cross section: Large web thickness and strength built in • Thunderweb flute form ejects hot chips rapidly • Dissipates heat better increasing life time • Precision starting, drill bit won't walk on material surface • Polished finish reduces friction …

Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or p more→ower drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.4.00mm.Additional Information:• Tip Diameter: 4.0mm• Working Length: 42mm• Overall Length: 75mm• Pack Qty.: 1

It is compatible with SDS max shank systems. The SDS max Toothed Chisel is equipped with special teeth to allow for the easy and effective removal of mortar and plaster. The chisel is also intended fo more→r use in concrete and brick for tasks such as repointing bricks.Toothed chiselSDS max toothed chisel provides easy removal of mortar and plaster• Easy Removal of Mortar• SDS max Toothed Chisel provides easy removal of mortar and plaster• Equipped with special teeth for effective work progressSpecifications:Total length mm: 300Chisel cutting edge mm: 32Materials:ConcreteMaterials in Detail:Mortar

This is the Makita cold chisel 19mm hex shank. These are perfect for working on concrete, demolition or chasing. Symmetrical head-geometry with centring-tip for optimised results in the event of reinf more→orcement. Specifications • Diameter: 25 mm • Overall Length: 380 mm • Shank: 19mm A/F • Pack Quantity: 1 Features & Benefits • Matches the power of the machine • Suitable for 'K' fitting machines • Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement • Application: Concrete, demolition, chasing • Forged and tempered cold chisel

Bahco 434 Series Bevel Edge Chisel has been developed according to the scientific ERGO™ process. The 2-component grip, splitproof handle allows repeated hammer blows, and the blades are manufact more→ured from hardened and tempered steel, which are precision ground for maximum sharpness and long-lasting performance. With the exception of the 50mm wide blade, the remaining chisels in the 434 range are supplied with a safety guard and have rounded shoulders for added safety.Size: 35mm.Additional Information:• Blade Width: 35mm

The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a prec more→ision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Includes protective holster. Size: 14mm.Additional Information:• Blade Width: 14mm

The Stanley 0-16-877 Dynagrip Bevel Edge Chisel, designed for intensive use The Stanley 0-16-877 18mm chisel is part of the Dynagrip range which is available in numerous sizes. It features a lacquered more→blade for corrosion resistance and an ergonomic soft-grip CAB handle for comfort and control. It is designed for intensive use, with a steel striking cap for increased striking efficiency. Features:
- Specifically made for intensive use
- Manufactured in Sheffield, England
- Blade Lacquered for corrosion protection
- Pre-sharpened blade - ready for immediate use
- Ergonomic soft grip CAB handle for comfort and control
- Longer handle design for shock/shatter resistance in use
- Forged …

Octagonal shank chisel manufactured from selected steel with polished cutting edge. Fitted with impact absorbing hand protection grip. Sold loose.