Worx WX713
Cutting Discs439
 |
Reilable Performance in Stone - The standard for stone cutting disc cuts reliably in stone. It features a good silicon carbide and resin blade specifically designed for work on stone. The product is i more→ntended for work on stone. For use with Bosch angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reilable Performance in Stone • Standard for Stone cutting disc cuts reliably in stone • The silicon carbide and resin blade is specifically designed for work on stone Specifications Specification: C 30 S BF Diameter: 125mm Bore size: 22,23mm Thickness: …
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Makita Comet Diamond Cutting Blade Designed for use on porcelain and hard floor tiles, can also be used for general tile cutting. Symmetrical head-geometry with centring-tip for optimised results in t more→he event of reinforcement. Ideal for use on porcelain and ceramic tiles. Features & Benefits • Designed for use on porcelain and hard floor tiles, can also be used for general tile cutting • Smooth cut • Suitable for porcelain and ceramic tile • Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement Specifications • Diameter: 125mm • Segment Height: 5mm • Bore: 22.23mm • Pack Quantity: 1
 |
2 608 615 059; Cutting Disc, angle grinder; BOSCH; 125 2 BETON
 |
These Makita Type 41 Pro Cutting discs are designed for fast clean cutting and are particularly suitable for use with cordless angle grinders for around 40% longer battery life over a standard cutting more→wheel. They are manufactured from high quality bonded 60G aluminium oxide for long life and are suitable for cutting steel and stainless steel. Please note generic stock image shown for illustration purposes only. Refer to the description for the specifications. Specifications • Diameter: 125mm • Thickness: 1.2mm • Bore: 22.23mm Contents • 10 Discs
 |
The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia A more→lumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.1 x Faithfull Zirconia Abrasive Jumbo Flap Disc ZA120 125mm. 120 grit is suitable for smooth grinding. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces. For use with a 125mm angle grinder. Max. Speed: 80m/s 12,200 RPM.Additional Information:&bu
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock cutting discs can be used in standard angle grinders as well as X Lock machines. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in …
 |
continuous diamond saw 1a1r 125x1,2x22,23 dct. for ceramic tiles, ceramic stones, etc. tyrolitSpecifications:- Weight: 0,1520 KG
Wire & Cup Brushes452
 |
Price from £6.77 up to £6.95
Compare prices5→Compare prices and buy Sealey Conical Wire Brush Ø100mm M14 x 2mm
• Suitable for use with power tools up to the maximum rated rpm.• Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.Suitabl
 |
Price from £1.49
Compare prices3→Compare prices and buy BlueSpot Flat Crimped Steel Wire Wheel Brush 50mm 6mm Shank
The BlueSpot Tools Flat Wire Wheel Brush is ideal for preparing metal surfaces for welding and painting. Its 6mm (1/4in) shank fits most electric drills.This BlueSpot Tools Flat Steel Wire Wheel Brush more→has the following specifications: Shank: 6mm (1/4in).Wire: 0.3mm.Diameter: 50mm.Max. Safe Speed: 4,500 RPM.Additional Information:&bu
 |
Price from £23.79 up to £34.95
Compare prices6→Compare prices and buy Bosch 1608614002 100mm Cup Bush
Not available.
 |
Price from £7.49
Compare prices3→Compare prices and buy Faithfull Twisted Knot Wire Wheel Brush 100mm M10 Thread
Faithfull Conical Knot Brush with high tensile steel wire. Ideal for work in hard-to-reach places such as edges or corners. Suitable for the removal of slag, rust, scale or even dried cement. Max. Cut more→ting Speed: 12,500 rpm.Type: Knot conical Diameter: 100 mm Thread: M10 x 1.5 Wire: 0.5 mm twist knot steel Conforms to ISO 9001. and DIN EN1083-1 and 2Additional Information:&bu
 |
Price from £57.95 up to £59.99
Compare prices4→Compare prices and buy Lessmann Pipeline Brush 48 Knots 178 x 22.2mm Bore Stainless Steel Wire LES47580
Lessmann Pipeline Brushes are specially developed for professional use on U and V-welds in the pipeline industry. These high-quality Lessmann brushes have a long lifetime and are quiet when running. T more→hey are especially narrow and therefore they are the perfect tool for cleaning all welds at tube connections.
 |
Price from £32.86 up to £37.95
Compare prices5→Compare prices and buy Bosch 0.5mm Knotted Steel Wire Cup Brush 100mm M14 Thread
Extra-Coarse Finish - The Heavy for Metal Wire Cup Brush provides an extra-coarse surface finish. This cup brush is fitted with knotted wire for heavy-duty cleaning applications. Ideal for use in meta more→l, it is suitable for cleaning work on medium to large steel surfaces, such as removing heavy rust, underseal, paint or varnish. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. Fits GGS 6 and GGS 8 straight grinders with M14 thread. Features and Benefits …
 |
Price from £24.99 up to £34.95
Compare prices6→Compare prices and buy Bosch Pt Clean Metal 100x0.5x180 Mm M14 Brush Cup 1608614011
Clean For Metal Wire Cup Brush Provides An Extra-Fine Surface Finish. Brush Wires Are Available In Different Thicknesses For Variable Levels Of Abrasive Needs. Thicker Wires Are More Aggressive, Produ more→cing A Coarser Yet Faster Surface Finish, While Thinner Wires Deliver Finer, Smoother Surface Results. It Is Intended For Use With Angle Grinders With An M14 Thread.Features
 |
Price from £6.49 up to £6.53
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 100mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø100mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 100mm width and a 6mm more→shaft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Diameter: ø100mm. • Maximum Speed: 4500rpm. • Model No. SFBS100Technica
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
