Yato YT-82390
Diamond Core Bits & Milling Cutters84
 |
Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work 9.5mm diameter X 25mm cutting length bearing guided trimmer for bringing decorative lamin more→ates and veneers flush to an edge or for templating work. Two flute TCT tips, Ideal for worktop fitting for flush trimming edging laminates for a professional finish. Bearing guide can be used with templates, ideal for pattern making or replicating components. Narrow diameter ideal for following tighter curves on more intricate work. 1/4in shank for easy control in smaller routers with K mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: …
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 5 more→• Dia Imperial: 13/64 • Cut Length Metric: 16 • Overall Length Metric: 69
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 19 • Overall Length Metric: 59
 |
They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. Use at drilling speeds more→only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications • Dia Metric: 15.9 • Dia Imperial: 5/8 • Dia2 Metric: 4.76 • Overall Length Metric: 85
 |
Trend Snappy 9.5mm diameter countersink - with adjustable pilot drill 9.5mm diameter countersink with pilot drill designed for Imperial screws up to 8 gauge. The perfect, fast swap accessory for cl more→ean, consistent finishes." Made from hardened tool steel for assured performance. Ideally suited to hard and softwoods alike." Fitted with high quality 2.75mm diameter replaceable HSS (High Speed Steel) drill designed for piloting work with Imperial screws up to 8 gauge in softwood and 6 gauge in hardwood. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy …
 |
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 1/4 • Dia Metric: 28 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 53 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 7.9 • Radius 1 Imperial: 5/16
 |
For veining, panelling, 'V' grooving, bevelling & chamfering. Specifications • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 20 • Overall Leng more→th Metric: 60 • Angle: 45
 |
Crafted from solid carbide, it offers exceptional hardness and wear resistance, making it suitable for milling a wide range of materials including stainless steel, cast steel, cast aluminium, and copp more→er. The TiALN (Titanium Aluminium Nitride) coating enhances the end mill's performance by reducing friction and heat, allowing for faster cutting speeds and extended tool life. The Weldon shank design provides increased stability and secure grip in tool holders, ensuring precise and efficient milling operations. Product Operations • Shallow shoulder milling • Deep shoulder milling • Plunge milling • Shallow slot milling • Ramping • Progressive Plunging Features & Benefits …
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
