Yato YT-82772

HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to PointTeQ tip design. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is to have a highly more→elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill Bit PointTeQ is to DIN 338. The drill bit is Type N (flute angle) with a tip of 135 degrees. It has a cylindrical shank system and is intended for use in drill stands and drill drivers.Features: - Self-centering tip prevents wandering, making quick and easy drilling starts possible- Increased drilling rate generates less heat and wear- Cylindrical shank compatible with three-jaw drill chucks.- PointTeQ tip …

Expert Quality, high speed steel twist drills. Manufactured to DIN 338 and ISO 235/1 Specifications Features and Benefits • Expert Quality • High speed straight steel drills Contents 1 x more→HSS Drill Bit, 5/32"

Replacement drill bit. Specifications • Dia Metric: 7 • Overall Length Metric: 100

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar more→and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction professionals drilling concrete an…

Drill bits with a spiral angle of 28 and a point angle of 118. The drill bits have a split point for better positional accuracy. These are standard drill bits to be used in steel and cast iron. DIN 341

• HSS Dura 25 core bit with QuickIN holder• TiN surface coating for outstanding service lives and the best glide properties.• Metric dimensions, cutting depth 25 mm.SpecificationsCuttin more→g depth: 25 mmBore Ø: 14 mm

The Bahco Series 414 Bevel Edge Chisels are a durable multipurpose chisel, which has been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a prec more→ision ground blade for maximum sharpness and long-lasting performance. Polypropylene handle and with a protective holster includedType: bevel edge. Size: 25mm.Additional Information:• Chisel Type: Bevel Edge• Size (mm): 25

The XLR range of points and chisels features a shaft of shock resistant steel to prevent breakage with a wear resistant tip to maintain sharpness. Features & Benefits • For heavy duty chiselling, more→channelling and demolition tasks in concrete/rebar and hard stone • Fully hardened steel point/chisel face for high wear resistance and increased productivity • The special 'Stay Sharp' chisel tip ensures a long-lasting sharpness of the chisel and thus an extended durability • High durability shock resistant steel minimises breakage Specifications • Width: 25mm • Length: 400mm • Shank: SDS Max • Pack Quantity: 1

The DeWalt SDS Max Steel Flat Chisels are made from toughened steel which ensures tough bits. They also feature micro-processor controlled heat treatment for consistently tough, long-life and have a f more→lat end. Features & Benefits • Wide range of product offerings for the most common concrete demolition jobs • Specially toughened steel and micro-processor controlled heat treatment ensures consistent tough bits with long life Specifications • Width: 80mm • Length: 300mm • Shank: SDS Max • Pack Quantity: 1

The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a prec more→ision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Includes protective holster. Size: 22mm.Additional Information:• Chisel Type: Bevel Edge• Size (mm): 22

Bahco 434 Series Bevel Edge Chisel has been developed according to the scientific ERGO process. The 2-component grip, splitproof handle allows repeated hammer blows, and the blades are manufactured fr more→om hardened and tempered steel, which are precision ground for maximum sharpness and long-lasting performance. With the exception of the 50mm wide blade, the remaining chisels in the 434 range are supplied with a safety guard and have rounded shoulders for added safety. Size 30mm.

45 CRMOV7 air harder steel
Best Steel quality
High impact resistance – virtually indestructible
Evenly hardened
People who work polished and clear lacquered