Yato YT-82819
Multi Tool Blades392
 |
Price from £18.99 up to £31.87
Compare prices7→Compare prices and buy Draper Oscillating Multi-Tool Blade Set Including Ceramics (8 Piece)
Pack of eight commonly used oscillating multi-tool blades. Designed for cutting ferrous and non-ferrous metal, wood, plastic and plasterboard. With blades included for cutting ceramics, including floo more→r and wall tiles, and removing grout and mortar. Universal fitting for use with Draper and other manufacturers' oscillating multi-tools.
 |
Price from £19.40 up to £25.95
Compare prices5→Compare prices and buy Bosch Expert MAVZ 116 RT Starlock Max Oscillating Multi Tool Sanding Plate
Lasts up to 100x longer than standard sandpaperSmall but tough sanding jobs to remove old material and prepare surfaces for working can be almost impossible with conventional sanders or by hand. Even more→if you can reach the surface, these jobs destroy sandpaper. With the Expert Sanding Plate however, you can reach corners and sand difficult materials with your oscillating multitool.Using Bosch Carbide Technology, grits of the hardest metal are robustly fixed to the surface. This sharp grit remains fully effective over its long lifespan because you can clean it with a solvent. The Expert Sanding Plate is designed for multiple materials and users.The coarse, open grains of the RT2 (grit size 20) …
 |
Price from £11.90 up to £13.95
Compare prices6→Compare prices and buy DeWALT DT20700-QZ Multi Tool Hook & Loop Sanding Plantten
DT20700 Multi Tool Sanding Platten Hook and loop paper attachment allows sand paper to be easily attached. Dust extraction capability, when attached to a separate dust extraction unit, to minimise dus more→t when sanding. Fits Dewalt Multi Tool
 |
Price from £4.19 up to £7.95
Compare prices4→Compare prices and buy Dremel 0.8mm Engraving Cutter REF.108 - 26150108JA
A high-speed cutter designed for precision rotary engraving. USES: Ideal for detail engraving, carving and routing in wood, fibreglass, ceramics, plastic, jewellery and soft metals. TIPS: Use the side more→s of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure. Do not use this bit with hardened materials. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed. Shank size 3.2mm Pack Qty 3
 |
Price from £4.95 up to £5.19
Compare prices4→Compare prices and buy Dremel SC411 EZ SpeedClic Sanding Discs, Pack of 6
2615S411JA Shank diameter: 3.2 mm Working diameter: 30 mm Grit: 60 Width: 32 mm Length: 32 mm Height: 3 mm 2615S413JA Shank diameter: 3.2 mm Working diameter: 30 mm Grit: 240 Width: 32 mm Length: 32 m more→m Height: 3 mm
 |
Price from £28.99 up to £32.99
Compare prices5→Compare prices and buy Dremel Plunge Router Attachment Ref. 335 - 26150335JA
Converts your Dremel tool into a plunge router to rout circles, signs and inlay work, decorative edges and to rout parallel to an edge. Plunge-lock in handle - simply turn handle to lock/unlock. Two d more→epth stops for quick, consistent adjustment of depth. Edge guide and circle guide to rout straight lines and perfect circles. Guide bushing set for letter and pattern template routing. Contents: Plunge Router Attachment. Edge Guide. Circle Guide. Guide Bushing Set. Wrench.
 |
Price from £14.99 up to £18.95
Compare prices4→Compare prices and buy Dremel 678 Rotary Multi Tool Line and Circle Cutter Attachment 26150678JB
This robust metal jig is supplied with a multipurpose cutting bit and provides a simple way to create accurate straight or circular cuts into materials such as wood, drywall and laminates. Features & more→Benefits • Quick and accurate way to cut out circles or straight lines • Easily connects to you Dremel multi tool • Included cutting bit is perfect for cuts in drywall, wood and laminate • Maximum cutting diameter 30cm Contents • Circle cutter • Straight edge guide • 1 Multipurpose cutting bit (561)
 |
Price from £5.49 up to £6.99
Compare prices5→Compare prices and buy Bosch GOP Multi Tool Depth Stop 2608000589
The Basic Depth Stop provides control of cutting depth when using segment saw blades, for example when replacing individual parquet elements. It features a four-stage adjustment for defining the cutti more→ng-depth limits with precision. It is intended for use on all materials. Cutting depths for segment saw blades with 85 mm diameter: 8, 10, 12, 14 mm Cutting depths for segment saw blades with 100 mm diameter: 14, 16, 18, 20 mm This depth stop is suitable for use with all Starlock, Starlock Plus and Starlock Max tools as well as common Bosch multi-tools. Basic depth stop Four-stage adjustment For precise cutting depths in combination with segment saw blades with 85 mm diameter and 100 mm diameter …
 |
Price from £17.99 up to £18.95
Compare prices5→Compare prices and buy Dremel S456 Dm Max Multitool Metal Cutting Disc Blue 2615S456DM
The heavy-duty Dremel Max Premium Cutting Wheel SC456DM is is coated with super abrasive grit called cubic boron nitride (CBN) which provides maximum durability allowing the wheel to remain sharp long more→er, stay cool, and prevent shrinking. The Max Premium Metal Cutting Wheel lasts 20 times longer than the regular 426 Cutting Wheels and is reinforced with a metal core to prevent breaking.The high-performanc
 |
Price from £11.95
Compare prices3→Compare prices and buy Smart Trade Celatex Form Insulation Multitool Oscillating Blade HINB1
A New innovation from the SMART Tool Group. Custom made for cutting Insulation board. Can also be used on foam and other soft materialsFeatures & Benefits• Blade Width: 15-31mm • Depth of Cut: 100mm
 |
Price from £19.95
Compare prices3→Compare prices and buy Sirius 10 Piece Multitool Oscillating Blades Set SRSKIT10
This versatile Sirius blade set for oscillating multi tools contains a selection of blades for cutting common construction materials including wood, metal and plastic. Black oxide coating helps to ens more→ure corrosion resistance, an etched metric scale on the blade to helps to guide the depth of cut, and a universal arbor design means they are compatible with a wide range of oscillating multi tools, including the models listed below. Suitable for: • Einhell: BT-MG220E,RTMG2
 |
Price from £7.59 up to £10.95
Compare prices5→Compare prices and buy Dremel 9911 3.20mm Egg Tip Tungsten Carbide Cutter
9910 Spear Tip Shank diameter: 3.2 mm Working diameter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 3 mm Height: 39 mm Maximum RPM: 30,000 1/min 9911 Egg Tip Shank diameter: 3.2 mm Working diam more→eter: 3.2 mm Accessory length: 39 mm Width: 3 mm Length: 30 mm Height: 39 mm Maximum RPM: 30,000 1/min 9931 Spear Tip Shank diameter: 3.2 mm Working diameter: 6.4 mm Accessory length: 45 mm Width: 4 mm Length: 4 mm Height: 45 mm Maximum RPM: 35,000 1/min
Important!
Compatibility with specific Multi Power Tools models should be checked with manager of online store immediately before purchase.
Compatibility with specific Multi Power Tools models should be checked with manager of online store immediately before purchase.
