Zubr FM-1650
Diamond Core Bits & Milling Cutters1647
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 51 • Overall Length Metric: 92 • Type or Grade: Centre tip
 |
HSSCo 3 Flute 90° countersink. Specifications • Nominal Diameter: 10.4mm • Shank Diameter: 6mm • Overall Length: 50mm • Capacity: 2.5mm - 10.4mm Features and Benefits • P more→roduces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Specifications • Shank Diameter: 1/2 • D more→ia Metric: 50.8 • Dia Imperial: 2 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 75 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 19.1 • Radius 1 Imperial: 3/4
 |
For coves and part of a rule joint. Specifications • Shank Diameter: 1/4 • Dia Metric: 6 • Cut Length Metric: 15 • Overall Length Metric: 58.5 • Radius 1 Metric: 3
 |
Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only.. Specifications • Shank Diameter: 1/2 • Dia Metric: 86 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 75 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 40
 |
Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Specifications • Shank Diameter: 1/2 • Dia Metric: 67 • Cut Length Metric: 16 • Cut Length Imperial: 5/8 • Overall Length Metric: 78.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 17.5
 |
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Specifications • Shank Diameter: 8 mm more→• Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 7.9 • Cut Length Imperial: 5/16 • Overall Length Metric: 48.5 • Radius 1 Metric: 6.3 • Radius 1 Imperial: 1/4
 |
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/2 • Dia Metric: 11 • Cut Length more→Metric: 5 • Overall Length Metric: 54.5 • Angle: 45
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
