Zubr FPL-950K
Diamond Core Bits & Milling Cutters1898
 |
Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. A 2mm maximum overlap should be left before trimming. Specifications &bu more→ll; Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 51 • Cut Length Imperial: 2 • Overall Length Metric: 116 • Bearing Dia Metric: 12.7 • Angle: 90
 |
Clarkson 02PM/04PM long series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 3.0mm - 20.0mm: Four Flutes Sizes 22.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight F more→lutes BS 122/4. Specifications • Milling Diameter: 17mm • Shank Diameter: 16mm • Length of Cut: 67mm • Overall Length: 115mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectiona
 |
Manufactured from a Cobalt-based HSS (M42), a premium grade high speed tool steel, heat treated to surpass the hardness of other HSS materials. The increased cobalt content helps retain hardness at el more→evated temperatures. This increased hot hardness makes the material especially suited for machining stainless steels and temperature resistant alloys. It also gives the material increased wear resistance needed for machining in highly abrasive cutting applications. M42 is also a very tough grade and can therefore cope with the most aggressive applications in most materials. The Aluminium Titanium Carbo-Nitride (AlTiCN) multilayer coating has a hardness of 3700HV which surpasses many other nitride …
 |
3 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb. Shank mounted bearing self guides the cutter along door edge. Specifications • Shank Diamet more→er: 12 mm • Dia Metric: 24.3 • Cut Length Metric: 50 • Overall Length Metric: 101 • Bearing Dia Metric: 19 • Angle: 3
 |
Side profile for an attractive handrail. Can be used in conjunction with C191. to produce the handrail top. Specifications • Shank Diameter: 1/2 • Dia Metric: 32 • Cut Length Metric more→: 38 • Overall Length Metric: 86.5 • Bearing Dia Metric: 16 • Radius 1 Metric: 9.5 • Radius 2 Metric: 12.5
 |
A range of small sized panelling cutters. Ideal for veining and fluting applications. Specifications • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metri more→c: 7.5 • Overall Length Metric: 48 • Radius 1 Metric: 4.8
 |
Lip and Spur - Short series. These slow spiral TCT drills can be used in drilling machines or portable routers. Suitable for use in the DeWalt DE6252 Dovetail Jig. For drilling machines or routers. more→Specifications • Shank Diameter: 1/4 • Dia Metric: 8 • Cut Length Metric: 35 • Overall Length Metric: 70
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 8 mm • Dia Metric: 7.9 • Dia Imperial: 5/16 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 68.5
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
