Zubr FPR-1200
Diamond Core Bits & Milling Cutters1916
 |
A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only. Specifications • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 6. more→35 • Overall Length Metric: 75 • Bearing Dia Metric: 22
 |
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges. For deep channels, take a series of passes. Specifications • Shank Diameter: 1/4 more→• Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 6.3 • Cut Length Imperial: 1/4 • Overall Length Metric: 46.5 • Radius 1 Metric: 4.8 • Radius 1 Imperial: 3/16
 |
Cutters with guide bearing reduce setting up time for curved workpieces. Specifications • Shank Diameter: 1/4 • Dia Metric: 24.7 • Overall Length Metric: 51 • Bearing Dia Metric: more→12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 6
 |
Purpose made for stair housing jigs. Ensures tight fit of tread in string. Specifications • Shank Diameter: 1/2 • Dia Metric: 22 • Dia Imperial: 7/8 • Cut Length Metric: 26 &bu more→ll; Overall Length Metric: 65 • Angle: 95
 |
HSS Three Flute 90° Countersink. Specifications • Nominal Diameter: 8.0mm • Shank Diameter: 6mm • Overall Length: 50mm • Capacity: 2.0mm - 8.0mm Features and Benefits • P more→roduces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
HSSCo 3 Flute 90° countersink. Specifications • Nominal Diameter: 31.0mm • Shank Diameter: 12mm • Overall Length: 71mm • Capacity: 4.2mm - 31.0mm Features and Benefits • more→Produces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 1/4 • Dia Metric: 34.9 • Dia Imperial: 1 3/8 • Cut Length Metric: 18 • Overall Length Metric: 69.5 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 11.1 • Radius 1 Imperial: 7/16
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 20 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 66.5
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
