Zubr Professional ZP-30-900 K

Lasts up to 3x longer than a standard drill bit - Drilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, result more→ing in downtime changing accessories and fetching supplies. The Full Carbide Head on the EXPERT SDS max-8X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact. Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS max-8X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel. For construction pr…

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials more→. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø14 x 300mmDimensions: Length: 20mm x Height: 345mmWeight: 0.212KgWarranty: Consumable

• Manufactured from HSS M2 steel for fast and accurate hole drilling.• Universal 19mm Weldon shank means this rotabor is suitable for use with Sealey and other leading brands of magnetic drills.• Avai more→lable in 25mm and 50mm cutting depths.Manufactured from HSS M2 steel for fast and accurate hole drilling. Universal 19mm Weldon shank means this rotabor is suitable for use with Sealey and other leading brands of magnetic drills. Available in 25mm and 50mm cutting depths.Technical Specification:Cutting Depth: 50mmSize: ø47mmDimensions: Length: 60mm x Height: 60mmWeight: 0.318KgWarranty: Consumable

Fast Drilling in Metal - The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents more→wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. It has a cylindrical shank system (shank is smaller than drill bit diameter) and is intended for use in drill stands and drill drivers. There is a low risk of breakage, especially for drill bits …

Osborn Goldex 81504 series jobber drill bits. High quality HSS fully ground titanium coated drill point for longer life. Suitable for drilling in steel, cast steel (alloyed and non-alloyed), grey cast more→iron, graphite and malleable cast iron. Features & Benefits • High speed steel TiN coated jobber drills • For drilling in steel, cast steel- alloyed and non-alloyed, stainless steel, titanium and aluminium • Standards DIN 338 • Self centering split point above 1.6mm • Bright finish body for maximum chip clearance Specifications • Size: 5.2mm • Flute Length: 52mm • Quantity: Pack of 10 • Point Angle: 118° • Point Type & Helix Angle: N ~ 30° …

Formwork drills made of abrasion-proof chrome vanadium steel. Big chip flow up The screwed-in shank guarantees a high running precision. On recommendation of the German Professional Organisation for w more→oodworking it is suitable for all drilling works in the building trade. Applications: suitable for all drillings in soft wood, hard wood, thin boards, deal boards, beams, gypsum wallboards, light building boards, insulation and heat insulation materials.Specifications:- Ø: 12,0 mm- Total length L1: 400,0 mm- Flute length L2: 100,0 mm- Cutting: direction right hand cut- Shank: cylindrical shank- Point angle: 118°- Shape: Shape N: Helical point normal ground

The Makita SDS Plus Self-Sharpening Scaling Chisel is engineered to deliver superior performance and durability for demanding demolition and scaling tasks. Featuring an SDS Plus shank, ensuring a secu more→re and stable fit with compatible rotary hammers. This design optimises power transfer and minimises tool slippage, enhancing overall efficiency and control during use. The chisel is equipped with advanced self-sharpening technology, which maintains a sharp cutting edge throughout its service life. This feature ensures consistent performance and reduces the need for frequent resharpening, providing greater convenience and efficiency on the job. Designed for removing hardened materials such as concrete,…

SDS plus Tile Chisel delivers clean and fast removal of wall and floor tile Self-sharpening spade body retains uniform thickness throughout its lifetime for consistently high removal rates Angled cutt more→ing edge, self-sharpening design for a long life and a 30%-higher material removal rate Fits all SDS plus rotary hammer drills.

Bahco 434 Series Bevel Edge Chisel has been developed according to the scientific ERGO™ process. The 2-component grip, splitproof handle allows repeated hammer blows, and the blades are manufact more→ured from hardened and tempered steel, which are precision ground for maximum sharpness and long-lasting performance. With the exception of the 50mm wide blade, the remaining chisels in the 434 range are supplied with a safety guard and have rounded shoulders for added safety.Size: 22mm.Additional Information:• Chisel Type: Bevel Edge• Size (mm): 22

FatMax Bevel Edge Chisel with superior Thru Tang design handle for extra strength, reassurance and durability. The steel striking cap can be used with a steel hammer for increased force at the point o more→f contact. Quality chrome alloy (ball bearing grade) steel provides superior edge retention, and an ergonomic soft-grip handle offers maximum grip and control. With a full length blade guard for added safety. Features: Ergonomic, shatterproof, dual component polymer handle EN31 ball bearing grade steel Bevel edged with Thru Tang design For carving, cutting and removal of wood and timber Specifications: Dimensions: H:5.5 x W:34.8 x D:3.3 cm Colour: Multi Guarantee:1 year Material: Steel Model Number: …

Pointed chisel RTec Speed, self-sharpening with 30% higher material removal rate.Specifications: - Length: 400 Mm

Various Demolition Applications - The Flat Chisel provides standard chiselling for various demolition applications in concrete and brick. Good material removal on light application is made possible by more→the chisel´s flat cutting edge. The chisel is intended for mortising, demolition and adjustment work as well as for restoring joints and clearing reinforcements. It is compatible with a 28 mm hex shank system for hammers. Flat Chisel provides standard chiselling for various demolition applications in concrete and brick With 28 mm hex shank for breakers. Features and Benefits • Standard Chiselling in Concrete and Brick for Various Demolition Applications Specifications Total length: 400mm C…