Power Saws Starrett

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.