Power Saws Trend

T18S 18V 184mm Single Bevel Mitre Saw with Battery and Charger supplied. Incorporates Trend's high performance motor – Built for power and endurance. Compact, lightweight and essential for any woodworking trade or serioys DIY application. Make accurate, precise cuts across a vast range of timber sizes for work that you can be proud of. Bare Unit - Use with your existing Trend T18S batteries and charger. Click to see the whole Trend T18S range.

T18S 18V 165mm Brushless (BL) Circular Saw. Designed to be put to the test, Trend's circ saw comes with a front-mounted laser, aluminium base and guarding for durability and safety, as well as a front-grip top handle for additional comfort and support. Accurate and ergonomic, and supplied with a 24 tooth TCT blade. Bare Unit - Use with your existing Trend T18S batteries and charger. Click to see the whole Trend T18S range.

Trend Snappy 1/2 diameter plug cutter is made from Tool Steel, allowing longer plugs to be drilled. Plugs are very slightly tapered. Recommended for use with a pillar drill.

This blade is laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. Micro-granular carbide tips are used to give long lasting performance in a wide range of materials and to provide the maximum number of resharpenings.

This blade is laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. Micro-granular carbide tips are used to give long lasting performance in a wide range of materials and to provide the maximum number of resharpenings.

These blades are laser cut from hardened, chrome alloyed steel plate which is then tempered and roller tensioned. D 6 1/4 inches D 160 mm Bore 20 mm Kerf 2.6 mm Plate thick 1.6 mm No. of Teeth 48 Tooth form ATB Hook 10 degrees Quick Selector No. 7 Colour Code Yellow

Non-stick PTFE coated - prevents resin build up & prolongs blade life

165mm diameter Panel trim sawblade 48 teeth.

Multi-pack of same diameter sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision ground to maintain flatness. Microgranular Tungsten Carbide Tipped to allow cutting of abrasive materials. For plunge saws.

Teeth have top & front bevel for easier cutting through timber.

This saw blade has been designed for a professional finish in hard wood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. Laser etched on reverse to European standard EN847-1/2. High grade alloy steel plate body precision ground to maintain flatness.

Triple chip tooth form for cross cutting

This saw blade has been designed for a professional finish in hard wood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. Laser etched on reverse to European standard EN847-1/2. High grade alloy steel plate body precision ground to maintain flatness.

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in hard wood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. D 10 inches D 255 mm Bore 30 mm Kerf 2.4 mm Plate thick 1.8 mm No. of Teeth 72 Tooth form ATB Hook Neg 5 degrees Quick Selector No. C27 Colour Code White Yellow

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in hard wood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. D 10 inches D 255 mm Bore 30 mm Kerf 2.4 mm Plate thick 1.8 mm No. of Teeth 42 Tooth form ATB Hook Neg 5 degrees Quick Selector No. C27 Colour Code White Orange

This saw blade has been designed with a reamed bore to ensure precise fit to spindle and the silverbraze to ensure tip is bonded securely to body. Laser etched on reverse to European standard EN847-1/2.

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in hard wood, exotic rip, plywood rip, crosscut, softwood rip and chipboard laminated one-sided. D 10 inches D 250 mm Bore 30 mm Kerf 3.0 mm Plate thick 2.0 mm No. of Teeth 72 Tooth form ATB Hook Neg 5 degrees Quick Selector No. C25 Colour Code White Yellow This product includes: 1 X 30-16 Bushing Washer 1 X 30-20 Bushing Washer 1 X 30-25.4 Bushing Washer

250mm diameter Crosscut sawblade 42 teeth.

This 216mm diameter, 30mm bore high grade alloy steel circular saw blade is suitable for use with natural timber and man made boards, slicing though the material and producing a professional finish with ease.

For aluminium, plastic & worktops

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic & alloy. D 10 inches D 254 mm Bore 30 mm Kerf 2.8 mm Plate thickness 1.8 mm No. of Teeth 96 Tooth form TCP Hook Neg 6 degrees Quick Selector No. 26 Colour Code Grey

For aluminium, plastic & worktops

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in plastic & alloy. D 8 1/2 inches D 216 mm Bore 30 mm Kerf 2.8 mm Plate thickness 1.9 mm No. of Teeth 80 Tooth form TCP Hook Neg 6 degrees Quick Selector No. C19 Colour Code Grey

216mm diameter Aluminium/Plastic sawblade 64 teeth.