1stPlayer F4-B1 black
 | Outdated Product Stylish, roomy and relatively inexpensive case of standard size MidiTower. The chassis is designed to install an ATX motherboard. Inside the case, it will be possible to place discrete graphics up to 300 mm long and a processor cooler up to 160 mm high. The main feature of the model is a spectacular front panel. Thus, the relief surface of the front of this model forms an abstract ornament. The 1stPlayer F4-B1 case is valued for its ability to organize performant airflow. Ventilation channels are provided both in front, and on top, and behind. At the same time, in the standard configuration, there are initially 3 bladed impellers of 120 mm (2 coolers are mounted in front and 1 in the back). Additionally, the user has the opportunity to install 3 more of the same fans (2 on top and 1 more f...or the front panel). If desired, instead of the top fans, you can install a liquid cooling radiator. Partial perforation of the front panel allows you to improve air cooling, and to increase the decorative value, the case has a large viewing window — a single sheet of tempered glass on the entire right sidewall. Among the interfaces are: 2 USB 2.0 ports, 1 USB 3.0 port and mini-Jack audio jacks. |
 |
Stylish, roomy and relatively inexpensive case of standard size MidiTower. The chassis is designed to install an ATX motherboard. Inside the case, it will be possible to place discrete graphics up to 300 mm long and a processor cooler up to 160 mm high. The main feature of the model is a spectacular front panel. Thus, the relief surface of the front of this model forms an abstract ornament.
The 1stPlayer F4-B1 case is valued for its ability to organize performant airflow. Ventilation channels are provided both in front, and on top, and behind. At the same time, in the standard configuration, there are initially 3 bladed impellers of 120 mm (2 coolers are mounted in front and 1 in the back). Additionally, the user has the opportunity to install 3 more of the same fans (2 on top and 1 more for the front panel). If desired, instead of the top fans, you can install a liquid cooling radiator. Partial perforation of the front panel allows you to improve air cooling, and to increase the decorative value, the case has a large viewing window — a single sheet of tempered glass on the entire right sidewall. Among the interfaces are: 2 USB 2.0 ports, 1 USB 3.0 port and mini-Jack audio jacks.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog 1stPlayer 2026 - new arrivals, bestsellers, and the most relevant models 1stPlayer.
Raju this case has a budget and mid-range build. 1. Includes 3 fans; 2. Small size allows the installation of a PSU with short cables; 3. Sufficient openings for quality cable management; 4. Dust filters are installed on the front panel and on top; 1. Inconvenient location of HDD and SSD; 2. Different fans included in different stores; 3. Thin metal (but fine for its price); use 1stPlayer F4-B1 few months |
I sing to rock. Bad option. I was pleased with the design of the case and the included fans; with this case you can build a good cooling system, since there is everywhere for installing fans. Another advantage is that in this building there is a lower expansion of the living unit. Bottom location PSU Fans included Transparent acrylic side panel Pretty thin case metal Lack of space for drive installation (there are holes for installing bays, but the bays themselves need to be purchased separately) |
I have assembled several computers based on this case. For its price, the case is basically not bad. However, you have to completely disassemble it at first, rearrange the fans. But there's very little space for the hard drive, and it's inconveniently located. Essentially, it's difficult to install a 3.5" drive, and an additional SSD has to be attached with double-sided tape to the bottom fan area. If your budget is limited, but you want to build a powerful computer, you can consider this case to save money. Price Bottom PSU placement Compactness Graphics card slot Presence of fans No dust filters on the PSU and front panel Space for hard drive Thin base metal use 1stPlayer F4-B1 month or more i recommend it should buy |