ABC D270F

Without water cooling function

A simple desktop office water dispenser ABC D270F stands out from its peers with a very low price, primarily due to the lack of a cooling function. The device is intended for use in a home, office, shop, small hotel, or similar environment where there are few people. The device can be operated in the ambient temperature range from 18 °C to 38 °C in an area located at an altitude of not more than 1200 m above sea level. Due to the fact that water at room temperature is supplied from a cold tap, it is not entirely correct to call this model a cooler. Hot water can be obtained from the second tap, which is heated by a 420 W tubular water heater. The heating capacity to a temperature of about 90 °C is 5 L/h, which is quite enough to provide hot drinks to a large company at the same time.

Rotary Lever Valves

The control elements of the taps are rotary levers, and a bottle of water with a capacity of 10 – 19 liters is installed in the seat in the upper part of the device. On the rear wall there is a heating element switch and a network cable, and on the front panel there is a light indicator of heating. The technical features of the operation of taps with lever control of the supply allow the dripping of a small amount of water (up to 10 mL), which will drain into the drip tray. Please note that the device does not have thermal protection, therefore it is forbidden to turn on the heating when the tank capacity is not filled with water. Both containers for hot (0.8 L) and cold (0.6 L) water are made of steel, and the body of the device is made of low-cost white ABS plastic. The device has standard overall dimensions of 28x30x40 cm and, due to the absence of a cooling “hardware”, weighs only 2 kg. The model is designed for a 5-year service life and has a 12-month manufacturer's warranty.