APC Back-UPS ES 700VA BE700G-RS 700 VA
 | Outdated Product $126.73 up to $150.68 Quite a classic uninterruptible power supply of a backup type (Offline), which can be conditionally classified as a mid-range solution. The active power of the device is 405 watts. At half load, the APC Back-UPS ES 700VA provides approximately 12 minutes of runtime. The output signal is an approximate sinusoid. There is an input voltage stabilizer (range 180-266 V). The maximum input current is 10 A. Also note that the uninterruptible power supply has 8 sockets, of which only 4 are used for backup power. However, this model can also be used as a surge protector. In the role of indication, LED and sound notification are used. The UPS can be used to protect the RJ-45 communication line. Each time the device is turned on, a self-diagnosis is performed — the analysis system will notify the adm...inistrator about the need to change the battery pack. A maintenance-free lead-acid AGM battery with a sealed case and a thick electrolyte is used as a battery. The UPS during operation has an acceptable noise level (up to 45 dB). The housing does not require rigid fixation for installation. |
 |
Close
We recommend products in stockUPS APC →
standby, signal: similar to a sinusoid, power: 650 VA, effective 400 W, battery: 7 Ah, batteries 1, sockets: type G (UK), with reserve 6, without reserve 2, USB A
standby, signal: similar to a sinusoid, power: 650 VA, effective 400 W, battery: 6.2 Ah, batteries 1, sockets: type F (Schuko), with reserve 6, without reserve 2, USB A
standby, signal: similar to a sinusoid, power: 850 VA, effective 520 W, battery: 9 Ah, batteries 1, sockets: type G (UK), with reserve 6, without reserve 2, USB A, USB C
standby, signal: similar to a sinusoid, power: 650 VA, effective 400 W, battery: 7 Ah, batteries 1, sockets: type E (FR), with reserve 6, without reserve 2, USB A
standby, signal: similar to a sinusoid, power: 850 VA, effective 520 W, battery: 9 Ah, batteries 1, sockets: type F (Schuko), with reserve 6, without reserve 2, USB A, USB C
standby, signal: similar to a sinusoid, power: 850 VA, effective 520 W, battery: 7.7 Ah, batteries 1, sockets: type F (Schuko), with reserve 6, without reserve 2, USB A, USB C
standby, signal: similar to a sinusoid, power: 650 VA, effective 400 W, battery: 7 Ah, batteries 1, sockets: type F (Schuko), with reserve 6, without reserve 2, USB A
standby, signal: similar to a sinusoid, power: 750 VA, effective 450 W, battery: 5 Ah, batteries 1, sockets: type F (Schuko), with reserve 3, without reserve 3
standby, signal: similar to a sinusoid, power: 850 VA, effective 520 W, battery: 9 Ah, batteries 1, sockets: type E (FR), with reserve 6, without reserve 2, USB A, USB C
standby, signal: similar to a sinusoid, power: 850 VA, effective 520 W, battery: 9 Ah, batteries 1, sockets: type E (FR), with reserve 6, without reserve 2, USB A, USB C
standby, signal: similar to a sinusoid, power: 750 VA, effective 450 W, battery: 5 Ah, batteries 1, sockets: type G (UK), with reserve 3, without reserve 3
APC Back-UPS ES 700VA BE700G-RS 700 VA 550 VA 700 VA | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Quite a classic uninterruptible power supply of a backup type (Offline), which can be conditionally classified as a mid-range solution. The active power of the device is 405 watts. At half load, the APC Back-UPS ES 700VA provides approximately 12 minutes of runtime. The output signal is an approximate sinusoid. There is an input voltage stabilizer (range 180-266 V). The maximum input current is 10 A.
Also note that the uninterruptible power supply has 8 sockets, of which only 4 are used for backup power. However, this model can also be used as a surge protector. In the role of indication, LED and sound notification are used. The UPS can be used to protect the RJ-45 communication line. Each time the device is turned on, a self-diagnosis is performed — the analysis system will notify the administrator about the need to change the battery pack. A maintenance-free lead-acid AGM battery with a sealed case and a thick electrolyte is used as a battery. The UPS during operation has an acceptable noise level (up to 45 dB). The housing does not require rigid fixation for installation.
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog APC 2024 - new products, best sales and most actual models APC.
Before buying always check characteristics and configuration of product with online store manager
Catalog APC 2024 - new products, best sales and most actual models APC.
How to choose UPSMethods for choosing UPS for boiler, computer, refrigerator and other equipment
How to calculate the battery life of home and computer equipmentHow long will a conditional computer or refrigerator last from the UPS during power outages?
Series APC Back-UPS (low-cost, household)Compare using chart →
smart, signal: similar to a sinusoid, power: 1200 VA, effective 650 W, battery: 9 Ah, batteries 1, sockets: type F (Schuko), with reserve 4
smart, signal: similar to a sinusoid, power: 2200 VA, effective 1200 W, battery: 9 Ah, batteries 2, sockets: type F (Schuko), with reserve 4
smart, signal: similar to a sinusoid, power: 750 VA, effective 410 W, battery: 9 Ah, batteries 1, sockets: type F (Schuko), with reserve 4
smart, signal: similar to a sinusoid, power: 1600 VA, effective 900 W, battery: 7 Ah, batteries 2, sockets: type F (Schuko), with reserve 4
smart, signal: similar to a sinusoid, power: 950 VA, effective 520 W, battery: 9 Ah, batteries 1, sockets: C13/C14 with reserve
standby, signal: similar to a sinusoid, power: 1050 VA, effective 600 W, battery: 9 Ah, batteries 1, sockets: type F (Schuko), with reserve 6, without reserve 2, USB A, USB C
standby, signal: similar to a sinusoid, power: 650 VA, effective 400 W, battery: 7 Ah, batteries 1, sockets: type E (FR), with reserve 6, without reserve 2, USB A
smart, signal: similar to a sinusoid, power: 950 VA, effective 520 W, battery: 9 Ah, batteries 1, sockets: type F (Schuko), with reserve 4
smart, signal: similar to a sinusoid, power: 1600 VA, effective 900 W, battery: 7 Ah, batteries 2, sockets: C13/C14 with reserve
standby, signal: similar to a sinusoid, power: 500 VA, effective 300 W, battery: 7 Ah, batteries 1, sockets: C13/C14 with reserve, C13/C14 without reserve
standby, signal: similar to a sinusoid, power: 850 VA, effective 520 W, battery: 9 Ah, batteries 1, sockets: type F (Schuko), with reserve 6, without reserve 2, USB A, USB C
standby, signal: similar to a sinusoid, power: 350 VA, effective 210 W, battery: 7 Ah, batteries 1, sockets: C13/C14 with reserve, C13/C14 without reserve
standby, signal: similar to a sinusoid, power: 850 VA, effective 520 W, battery: 9 Ah, batteries 1, sockets: type E (FR), with reserve 6, without reserve 2, USB A, USB C
smart, signal: similar to a sinusoid, power: 500 VA, effective 300 W, battery: 7 Ah, batteries 1, external battery connection, sockets: C13/C14 with reserve
standby, signal: similar to a sinusoid, power: 650 VA, effective 390 W, battery: 9 Ah, batteries 1, sockets: with reserve 4, without reserve 4
smart, signal: similar to a sinusoid, power: 1200 VA, effective 650 W, battery: 9 Ah, batteries 1, sockets: C13/C14 with reserve
standby, signal: similar to a sinusoid, power: 325 VA, effective 185 W, battery: 3 Ah, batteries 1, sockets: type G (UK), with reserve 2, without reserve 2
standby, signal: similar to a sinusoid, power: 650 VA, effective 400 W, battery: 6.2 Ah, batteries 1, sockets: type F (Schuko), with reserve 6, without reserve 2, USB A
standby, signal: similar to a sinusoid, power: 850 VA, effective 520 W, battery: 7.7 Ah, batteries 1, sockets: type F (Schuko), with reserve 6, without reserve 2, USB A, USB C
standby, signal: similar to a sinusoid, power: 500 VA, effective 300 W, battery: 5.1 Ah, batteries 1, sockets: type F (Schuko), with reserve 6, without reserve 2, USB A
