Atlantic Round Eco VMR 50
![]() | Outdated Product Type: storage; Energy source: mains; Tank volume (L): 50; Power source: 230 V; Power consumption (W): 1200; Magnesium anode; Heating elements: 1; wet heater; thermostat; overheat protection; safety valve; Pipe connection: bottom; Dimensions (cm): 57.3x43.3x45.1; |
Atlantic Round Eco VMR 50 50 L 80 L | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Atlantic 2026 - new arrivals, bestsellers, and the most relevant models Atlantic.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Atlantic 2026 - new arrivals, bestsellers, and the most relevant models Atlantic.

Which is better: wet or dry heating element in a water heater?Learning the design features, pros and cons of "wet" and "dry" heating elements in water heaters

Detailed FAQ on storage water heatersWe answer the most common questions regarding the installation and operation of storage water heaters
There are a few issues that aren't satisfactory. Let's start with the fact that the connection cable is not included in the package; there's only a check valve, but the interesting part is that it's unknown what kind specifically, as its maximum pressure isn't stated. The check valve releases pressure through a dripper with every heating cycle, even though the water pressure is around ~3 – 3.5 bar, which is normal; in previous models, it almost never dripped. The instructions state that if the pressure exceeds 4 bar, a pressure reducer should be installed, with the maximum pressure up to 6 bar, which is standard like with most brands. The thermostat is hidden, and not just concealed such that you need to pry off a cover and adjust it, but you have to take a screwdriver, unscrew the cover, and only then set the temperature. So, you need to consider this and set the desired temperature during installation to avoid further adjustment. The maximum water temperature is indicated as 65° plus or minus 5°, but it feels like at least 70°, which is more than sufficient. The model is 1.2 kW; initially, I was concerned that it's not much, but it was planned to run cabling from the exhaust fan, where the cross-section is small; overall, it suffices, but the first heating took about 4.5 hours. It ultimately depends on individual needs; we use approximately 4 cubic meters of hot water per month, which is enough for us. What I dislike most is that the boiler has a noticeably warm surface, which means it has poor thermal insulation and isn't very economical, as it retains heat poorly. We installed an Ariston JUNIOR 80 V model for my parents, which stays cool on top and doesn't have these issues. – Completely silent operation – 1.2 kW allows use with weak wiring – hidden thermostat, a screwdriver is needed to change the temperature – no connection cable, more of a fact than a drawback – not the best insulation |
Add Review
Video reviews



















