Dnipro-M GL-160SE (19419000)
 | Outdated Product Type: angle grinder; Power source: mains (230 V); Power consumption (W): 1100; Rotation speed (rpm): 5400 – 10000; Max. disc diameter (mm): 150; Weight (kg): 2.6; |
 |
Dnipro-M GL-160SE | ||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Dnipro-M 2026 - new arrivals, bestsellers, and the most relevant models Dnipro-M.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Dnipro-M 2026 - new arrivals, bestsellers, and the most relevant models Dnipro-M.
How to choose an angle grinderBrief instructions for choosing a grinder
How does an expensive grinder differ from a cheap one?Design features and other factors affecting the quality and price of an angle grinder
0 2 1 4 |
I liked the grinder very much at work, it is light, it cuts perfectly and nothing happened to her for a long time. It doesn't overheat which is important. Comfortable to hold and operate. Price, quality, weight ....  Hamadun: use Dnipro-M GL-160SE few months |
I'm writing a review for those who are on the fence about buying or not. Let me start by saying that for those who aren't aware, this angle grinder is not designed for a 150mm disc. It has enough power to work with it, but the overload protection kicks in quite often. Many first-time users might be alarmed, but this happens because the grinder runs at 10500 RPM, while a 150mm disc typically requires 7-8 thousand RPM. To explain simply for those who don't know, the larger the disc, the fewer the RPM needed, and the higher the wattage required. If you use a 125mm disc, it will last longer than Bosch or Metabo. This angle grinder is made of durable plastic, with each part having its own mold in the casing. It includes a noise filter capacitor for the network, an electronic block with overload protection, soft start, and speed control. The gearbox has thick walls, plenty of lubrication, and the spindle shaft is press-fitted without a key and rests on a needle bearing. The gearbox is attached to the housing with long bolts, which are sealed with adhesive. The stator and rotor are armored; the rotor is banded and coated with a thick layer of lacquer. The branded bearings are protected from dust by a damping rubber. - Not a high price - Stator and rotor shield - Strong and reliable housing and gearbox - Long handle - Overload protection, soft start, speed controller - Good bearings - High-quality and long power cable - Three-year warranty - No vibration during operation - Powerful motor allows for extended work periods - Not suitable for cutting concrete, brick, or grooving with a 150 disc, the protection activates every one and a half minutes, no problems with a 125 disc. - The spindle lock doesn't look very reliable. - The additional handle is not rubberized, considering the grinder is heavy, it would have been helpful. use Dnipro-M GL-160SE less than month |
To be honest, 4 plus. It has overload protection, but it is not indicated. It stalled for the first time, I think they HAVE ARRIVED. Nothing special . But it serves, albeit for the home, and God forbid. The power of 1600 W is declared, and 1200 is real, according to sensations. For brick and concrete - it makes no sense to take, not for this Dnipro-M. And so, the money seems to be worth it. Long cord, although rubber, but a little dubeet, but not like plastic Overload protection was not indicated, although it is use Dnipro-M GL-160SE few months |
3 out of 7 user review(s) shown
4 more user review(s)
We recommendCompare using chart →
vibrating, 190 W, 11000 rpm, frequency 22000 opm, amplitude 2 mm, 93x185 mm, dust collector
angle grinder, 1450 W, saw blade 125 mm, 10000 rpm, soft start, kickback protection, additional handle
angle grinder, cordless, without battery, saw blade 125 mm, 9000 rpm, motor protection, kickback protection, additional handle
random orbital, 310 W, saw blade 150 mm, 4000 – 10000 rpm, frequency 8000 – 20000 opm, amplitude 3 mm, speed controller, additional handle, dust collector
random orbital, 300 W, saw blade 125 mm, 4000 – 12000 rpm, frequency 8000 – 24000 opm, amplitude 2.8 mm, speed controller, dust collector
random orbital, 300 W, saw blade 125 mm, 12000 rpm, frequency 24000 opm, amplitude 2.8 mm, dust collector
random orbital, cordless, without battery, saw blade 125 mm, 7000/9500/11000 rpm, frequency 14000/19000/22000 opm, amplitude 2.8 mm, dust collector
