Ginzzu SL200 black
 | Outdated Product A relatively inexpensive gaming platform, which nevertheless boasts bright RGB lighting and an acrylic sidewall. The dimensions of the system unit fit into the Midi Tower standard, and the chassis is designed for an ATX-format motherboard. The processor cooler is limited in height to 155 mm, the length limit for PCI-E expansion cards is 330 mm. Additionally, 2 3.5" drives and 3 more 2.5" solid-state devices will fit inside the case. The power supply unit is installed in the lower section isolated by a casing. Let's pay attention to the fact that the Ginzzu SL200 case uses two independent sources of RGB lighting: the front panel has a backlight and a standard fan, which is located on the rear wall. The user can, at his discretion, configure the operating modes of the front LED strip — the c...orresponding setting buttons are located on the left edge of the front panel. The backlight of the standard cooler is fixed. A 120 mm impeller is used as a standard fan, in total there are 4 seats for coolers in the case (1 in the back and 3 in the front). The right sidewall is translucent, it is held on several hinges, so the side window opens / closes like a door. |
 |
A relatively inexpensive gaming platform, which nevertheless boasts bright RGB lighting and an acrylic sidewall. The dimensions of the system unit fit into the Midi Tower standard, and the chassis is designed for an ATX-format motherboard. The processor cooler is limited in height to 155 mm, the length limit for PCI-E expansion cards is 330 mm. Additionally, 2 3.5" drives and 3 more 2.5" solid-state devices will fit inside the case.
The power supply unit is installed in the lower section isolated by a casing. Let's pay attention to the fact that the Ginzzu SL200 case uses two independent sources of RGB lighting: the front panel has a backlight and a standard fan, which is located on the rear wall. The user can, at his discretion, configure the operating modes of the front LED strip — the corresponding setting buttons are located on the left edge of the front panel. The backlight of the standard cooler is fixed. A 120 mm impeller is used as a standard fan, in total there are 4 seats for coolers in the case (1 in the back and 3 in the front). The right sidewall is translucent, it is held on several hinges, so the side window opens / closes like a door.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Before buying always check characteristics and configuration of product with online store manager
Catalog Ginzzu 2024 - new products, best sales and most actual models Ginzzu.
