United Kingdom
Catalog   /   Climate, Heating, Water Heating   /   Heating & Boilers   /   Boilers   /   Hotpoint-Ariston

Hotpoint-Ariston Cares X 24 FF 24.2 kW

Photos - Boiler Hotpoint-Ariston Cares X 24 FF 24.2 kW
Outdated Product
$445.40 up to $458.20
Gas double-circuit wall-mounted boiler of medium power with a closed combustion chamber and forced removal of flue gases. Differs in affordable cost and high-quality adaptation to east european conditions. Able to provide heating for a private house/cottage, office, commercial or east european premises with a total area of up to 194 m2 (with a ceiling height of up to 3 m). In addition to heating, its useful heat output of 24.2 kW can be used for hot water with a flow rate of up to 13.5 L/min (at 25 °C heating). This is quite enough for one or two points of analysis and full coverage of the usual household needs of a family of up to 5 people. An important advantage of the Hotpoint-Ariston Cares X 24 FF boiler was the use of a closed combustion chamber, which makes it possible to install the...device directly in residential areas of apartments. The primary heat exchanger (heating circuit) is made of high-quality aluminium, the secondary (DHW circuit) is made of high-quality stainless steel. The boiler is equipped with a microprocessor control system with full control and visualization of all important parameters on the LCD screen. Unpretentious to the quality of power (works stably with voltage drops), resistant to changes in gas pressure (up to 5 mbar). Shows high efficiency, is equipped with protective systems that are triggered in the event of a flame out, lack of traction, overheating and circulation disturbances.
add to listmy lists
Hotpoint-Ariston Cares X 24 FF 24.2 kW
Energy source:gas
Mount:wall, dual-circuit
Boiler power:24.2 kW, area ~ 194 m²
Combustion chamber:closed, flue 100/125, 80/80 mm
DHW temperature:from 36 °С, up to 60 °С

Gas double-circuit wall-mounted boiler of medium power with a closed combustion chamber and forced removal of flue gases. Differs in affordable cost and high-quality adaptation to east european conditions. Able to provide heating for a private house/cottage, office, commercial or east european premises with a total area of up to 194 m2 (with a ceiling height of up to 3 m). In addition to heating, its useful heat output of 24.2 kW can be used for hot water with a flow rate of up to 13.5 L/min (at 25 °C heating).

This is quite enough for one or two points of analysis and full coverage of the usual household needs of a family of up to 5 people. An important advantage of the Hotpoint-Ariston Cares X 24 FF boiler was the use of a closed combustion chamber, which makes it possible to install the device directly in residential areas of apartments. The primary heat exchanger (heating circuit) is made of high-quality aluminium, the secondary (DHW circuit) is made of high-quality stainless steel.

The boiler is equipped with a microprocessor control system with full control and visualization of all important parameters on the LCD screen. Unpretentious to the quality of power (works stably with voltage drops), resistant to changes in gas pressure (up to 5 mbar). Shows high efficiency, is equipped with protective systems that are triggered in the event of a flame out, lack of traction, overheating and circulation disturbances.

FAQ: 10 frequently asked questions about heating boilersAnswers to common questions in the section "heating boilers"
All specifications
Specifications Cares X 24 FF
Main
Energy sourcegas
Installationwall
Typedual-circuit (heating and DHW)
Heating area194 m²
Technical specs
Heat output24.2 kW
Min. heat output11 kW
Power supply230 V
Power consumption112 W
Coolant min. T35 °С
Coolant max. T82 °С
Heating circuit max. pressure3 bar
DHW circuit max. pressure6 bar
Consumer specs
DHW min. T36 °С
DHW max. T60 °С
Performance (ΔT=25°C)13.5 L/min
Performance (ΔT ~30 °C)9.6 L/min
"Summer" mode
Circulation pump
Control busBus BridgeNet
Boiler specs
Efficiency93.8 %
Combustion chamberclosed (turbocharged)
Flue diameter100/125, 80/80 mm
Inlet gas pressure20 mbar
Max. gas consumption2.73 m³/h
Expansion vessel capacity8 L
Heat exchangeraluminium
Connections
Mains water intake1/2"
DHW flow1/2"
Gas supply3/4"
Central heating flow3/4"
Central heating return3/4"
Safety
Safety systemsgas pressure drop
water overheating
flame loss
draft control
More specs
Dimensions (HxWxD)770x400x315 mm
Weight30 kg
Added to E-Catalogoctober 2016
FAQ: 10 frequently asked questions about heating boilersAnswers to common questions in the section "heating boilers"
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Hotpoint-Ariston 2024 - new products, best sales and most actual models Hotpoint-Ariston.
Filters
Models
Hotpoint-Ariston (energy source)