Junkers SO 120-1
 | Outdated Product $706.00 Type: storage; Energy source: indirect; Tank volume (L): 114; Power source: energy independent; Performance (Δt ~25 °C) (L/min): 10; Heating elements: 1; thermostat; overheat protection; Pipe connection: side; Dimensions (cm): 97х51х51; |
 |
Close
Junkers SO 120-1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Junkers 2025 - new products, best sales and most actual models Junkers.
Before buying always check characteristics and configuration of product with online store manager
Catalog Junkers 2025 - new products, best sales and most actual models Junkers.
Which is better: wet or dry heating element in a water heater?Learning the design features, pros and cons of "wet" and "dry" heating elements in water heaters
Detailed FAQ on storage water heatersWe answer the most common questions regarding the installation and operation of storage water heaters
AccessoriesAll accessories for Junkers SO 120-1 →
Additional features water heater Junkers SO 120-1:
Boilers of indirect heating are intended for heating of pressurized water. The heating element is a coil, which is connected to the heating boiler through a separate pump-controlled circuit. A magnesium anode is integrated as corrosion protection. The thermal insulation of the boilers consists of a rigid foam that does not contain fluorine hydrocarbon compounds.
- Stainless steel coil
- Water temperature sensor
Boilers of indirect heating are intended for heating of pressurized water. The heating element is a coil, which is connected to the heating boiler through a separate pump-controlled circuit. A magnesium anode is integrated as corrosion protection. The thermal insulation of the boilers consists of a rigid foam that does not contain fluorine hydrocarbon compounds.
We recommend
combined, 80 / 100 L, wet heater, 2, heat exchanger, 1200 W, from overheating, from freezing, RCD, 100.9x78.4x78.4 / 115.3x93.4x93.4 cm, vertical
tankless, wet heater, 36000 W, from overheating, dry heating protection, Δt ~25°C 17.3 L/min, 57x30x16 cm, vertical
tankless, heating coil, 18000 W, from overheating, Δt ~25°C 9 L/min, 47x23x11 cm, vertical
tankless, heating coil, 24000 / 27000 W, from overheating, Δt ~25°C 12.3 / 13.8 L/min, 48x23x11 cm, vertical
tankless, wet heater, 12000 W, from overheating, Δt ~25°C 5 L/min, 36x20x10.4 cm, vertical
tankless, heating coil, 24000 / 27000 W, from overheating, Δt ~25°C 12.3 / 13.8 L/min, 48x22.5x10.5 cm, vertical
tank, 10 / 15 L, wet heater, 1200 W, from overheating, RCD, 36x36x29.8 / 36x36x34.2 cm, vertical
tankless, heating coil, 5700 W, from overheating, Δt ~25°C 3.3 L/min, 14x19x8 cm, vertical