Kingston KVR 1.35V DDR3 1x8Gb KVR16LN11/8

Kvr16ln11/8 8Gb 2Rx8 1G X 64-Bit Pc3l-12800 Cl11 240-Pin Dimm   Valueram'S 1G X 64-Bit (8Gb) Ddr3l-1600 Cl11 Sdram (Synchronous Dram) 2Rx8 Low Voltage Memory Module Based On Sixteen 512M X 8-Bit Fbga Components. The Spd Is Programmed To Jedec Standard Latency Ddr3-1600 Timing Of 11-11-11 At 1.35V Or 1.5V. This 240-Pin Dimm U... moreses Gold Contact Fingers.          Features   • Jedec Standard 1.35V (1.28V ~ 1.45V) And 1.5V (1.425V ~ 1.575V) Power Supply • Vddq = 1.35V (1.28V ~ 1.45V) And 1.5V (1.425V ~ 1.575V) • 800Mhz Fck For 1600Mb/Sec/Pin • 8 Independent Internal Bank • Programmable Cas Latency: 11 10 9 8 7 6 • Programmable Additive Latency: 0 Cl - 2 Or Cl - 1 Clock • 8-Bit Pre-Fetch • Burst Length: 8 (Interleave Without Any Limit Sequential With Starting Address “000” Only) 4 With Tccd = 4 Which Does Not Allow Seamless Read Or Write [Either On The Fly Using A12 Or Mrs] • Bi-Directional Differential Data Strobe • Internal(Self) Calibration : Internal Self Calibration Through Zq Pin (Rzq : 240 Ohm ± 1%) • On Die Termination Using Odt Pin • Average Refresh Period 7.8Us At Lower Than Tcase 85°C 3.9Us At 85°C ≪ Tcase ≪ 95°C • Asynchronous Reset • Pcb: Height 0.740” (18.75Mm) Or 1.180” (30.00Mm) This document describes ValueRAM's 1G x 64-bit (8GB) DDR3L-1600 CL11 SDRAM (Synchronous DRAM) 2Rx8 ECC low voltage memory module based on sixteen 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This 240-pin DIMM uses gold contact fingers. ValueRAM Kingston's industry standard memory delivers award-winning performance and legendary Kingston reliability. When you know what you want you want ValueRAM.

Memory Speed - 1600 MHz ( PC3L-12800 ) Technology - DDR3L SDRAM Form Factor - DIMM 240-pin Storage Capacity - 8 GB Data Integrity Check - Non-ECC Features - Low Voltage , unbuffered Kingston ValueRAM - DDR3L - module - 8 GB - DIMM 240-pin - 1600 MHz / PC3L-12800 - unbuffered