Konner&Sohnen Heavy Duty KS 9202HDES-1/3 ATSR
Photos 4 | Outdated Product Diesel generator with phase switching. It can be used to power consumers that operate on a current with a voltage of 400 V or 230 V. The rated power in three-phase mode is 7 kW, in single-phase mode - 6 kW. The Konner&Sohnen Heavy Duty KS 9202HDES-1/3 ATSR generator is equipped with a diesel engine with a working volume of 498 cm3 and a power of 18 hp. In half load mode, it consumes 1.8 liters of diesel fuel per hour (at the same time, the fuel supply in the 20-liter tank is enough for 11.1 hours of operation). The manufacturer claims that the motor resource of this engine is 3000 hours. For easy starting at any ambient temperature, the diesel engine is equipped with an electric starter and a preheating system. It is possible to automate the start of the generator. To do this, it has a uni...versal 6-pin connector for connecting an ATS unit ("native" or from other manufacturers). The payload can be connected to the generator using 230 V (32 A) or 400 V (16 A) sockets, as well as low voltage terminals (12 V). The device has wheels that allow you to effortlessly roll the 168-kg power plant on the floor. |
Konner&Sohnen Heavy Duty KS 9202HDES-1/3 ATSR | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Diesel generator with phase switching. It can be used to power consumers that operate on a current with a voltage of 400 V or 230 V. The rated power in three-phase mode is 7 kW, in single-phase mode - 6 kW. The Konner&Sohnen Heavy Duty KS 9202HDES-1/3 ATSR generator is equipped with a diesel engine with a working volume of 498 cm3 and a power of 18 hp. In half load mode, it consumes 1.8 liters of diesel fuel per hour (at the same time, the fuel supply in the 20-liter tank is enough for 11.1 hours of operation).
The manufacturer claims that the motor resource of this engine is 3000 hours. For easy starting at any ambient temperature, the diesel engine is equipped with an electric starter and a preheating system. It is possible to automate the start of the generator. To do this, it has a universal 6-pin connector for connecting an ATS unit ("native" or from other manufacturers). The payload can be connected to the generator using 230 V (32 A) or 400 V (16 A) sockets, as well as low voltage terminals (12 V). The device has wheels that allow you to effortlessly roll the 168-kg power plant on the floor.
Before buying always check characteristics and configuration of product with online store manager
Catalog Konner&Sohnen 2024 - new products, best sales and most actual models Konner&Sohnen.