Marten Base MB-17V 17 kW
 | Outdated Product Energy source: solid fuel; Installation: floor; Type: single-circuit (heating only); Heating area (m²): 136; Heat output (kW): 17; Coolant min. T (°C): 60; Coolant max. T (°C): 95; Efficiency (%): 76; Combustion chamber: open (atmospheric); Firebox size: Dimensions (mm): 775x475x880; Weight (kg): 170 |
 |
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Marten 2026 - new arrivals, bestsellers, and the most relevant models Marten.
i do not recommend anyone to buy nothing good does not pick up temperature there is not enough power even for 80m on wood gains a maximum of 50 degrees no guarantee the seller said that this could not be use Marten Base MB-17V month or more i recommend it don't buy |
And so economical if you finish it yourself. But winter will show his work. We bought a boiler a week ago from the Martin 17V factory with a hob. The boiler has shown itself negatively since launch. Started to smoke around the stove. 15 minutes later there was a loud bang, the cast-iron stove burst. We contacted the factory’s hotline: we were told within three days that the guarantee for the stove does not apply, but the fact that the type of draft smokes is bad. This is with a pipe diameter of 200 and a height of five five five feet, as provided in the passport. In general, we, as buyers, were left with ourselves with this problem. I had to decide on my own. It turned out that when the plate was raised, it did not correspond to the size of the boiler; they tried to fit it at the factory. Under the size, they simply put it on the metal without icebest or sealant around the irregularities and the welding drops on which the cast iron was placed and when fastening it was pressed onto these welding drops. And when heated, due to such irregularities, the plate cracked. So who's to blame???? Collectors or traction. I had to buy a stove, apply sealant and icebest and the stove stopped smoking. I recall folk wisdom: the salvation of the drowning is the work of the drowning themselves. So think before you buy. use Marten Base MB-17V week i recommend it don't buy |
Heating and cooking
The Marten Base MB-17V boiler offers a unique opportunity not only to heat the room, but also to prepare food thanks to the built-in cast iron hobs (2 pieces). This model can be a real salvation for dachas and houses where there is no centralized gas supply. It will also free up space in small spaces as it eliminates the need to install a stove. In addition, savings on utility bills such as gas and electricity will be significant. A power of 17 kW is sufficient to heat a house with an area of 50 to 136 m². It should be noted, however, that the heating process may consume more fuel, since the coefficient of performance (COP) is around 76%. Therefore, the work will require more raw materials, such as anthracite, firewood or briquettes. Thanks to the increased volume of the firebox, the boiler is able to operate on one load of fuel for 5-8 hours.
High build quality
The manufacturer uses robotic welding, which reduces the number of defects and improves the quality of seams. The declared service life of the boiler is 10 years, which is an impressive figure for a budget model. The thickness of the steel sheets in the firebox is 3 mm, which can contribute to mechanical changes and accelerated wear. However, this also contributes to more efficient heating of the coolant, which is certainly a plus. The water-filled grate also actively participates in the heat exchange process, and its seamless tubes ensure a long service life without the risk of leaks.
Adjusting the loading hatch hinges makes it possible to maintain the tightness of the chamber during operation, even when the seals wear out, which is an important advantage.
- Draft regulator sold separately
- Hob
- Water-filled grate
