Catalog   /   Climate, Heating, Water Heating   /   Water Supply & Pumps   /   Surface Pumps   /   Metabo

Metabo HWA 6000 Inox (600980000)

Photos - Surface Pump Metabo HWA 6000 Inox
Outdated Product
Type: surface pump; Suitable for: clean water; Maximum performance (L/h): 6000; Maximum head (m): 55; Suction height (m): 8; Motor power (W): 1300; Country of origin: Germany; Impeller / auger material: stainless steel; Weight (kg): 13;
add to listmy lists
Metabo HWA 6000 Inox
centrifugal
Main
Suitable forclean water
Specs
Maximum performance6000 L/h / maximum /
Maximum head55 m / maximum /
Max. pressure5.5 bar
Pump typecentrifugal
Suction height8 m
Suction systemsingle-stage
Outlet size1"
Inlet hole size1"
Engine
Maximum power1300 W
Power sourceelectric
Mains voltage230 В
Power cord length150 m
General specs
Noise level76 dB
Country of originGermany
Pump housing materialstainless steel
Impeller / auger materialstainless steel
Weight13 kg
Added to E-CatalogDecember 2014
P/N
600980000

The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Metabo 2026 - new arrivals, bestsellers, and the most relevant models Metabo.
I recommend installing a hydraulic accumulator, then decide whether automation is needed.
12 June 2016 
Price-quality goes Pedrollo. Take into account the possibility of rewinding the engine. Before that, there was a simpler Metabo station with a hydraulic accumulator. But there was not enough pressure. Here I thought to put a pressure regulator Honeywell (see Avito) or a balance valve (Was). But when I turned on the accumulator-150 l. , the pressure for some reason dropped, which is OK. No need to buy a pressure switch
Everything works, the filter is branded at the entrance, which is quickly removed. I recommend. (For reference, a house with 2 bathrooms)
In the first reading, the pressure is excessive, my Golf cabin starts to buzz a little. The 10-year-old flexible hose at the mixer burst. I took exactly this one, with excessive pressure, I thought to adjust it later. (But the station itself turns off) Expensive block of the disconnecting relay - 100 euros. It is purchased additionally. I didn’t buy it. Advice - mount a piping of f20 pipes on the jacuzzi - it won’t be worse. In the throes of creativity, is it possible to put a pressure switch from an old Metabo here? Didn't dare experiment.
use Metabo HWAI 4500 Inox month or more i recommend it should buy
Add Review