Mission Air Hydro Bath 12kW
 | Outdated Product A powerful electric flow-through water heater, introduced to the market by the Mission brand in 2024. This modification uses a 12,000 W heating element. A 3-phase network is required to connect the device. The operating voltage is 400 V. This model is designed to service two water intake points simultaneously. The sealed housing (fully complies with the IP25 standard) allows you to install the device in the bathroom. The housing has an LED screen for setting and displaying the temperature mode. Heating setting range: 30-60 °C. The Mission Air Hydro Bath 12kW flow-through electric water heater has increased productivity. The maximum water supply rate reaches 12 l/min. The minimum flow rate for heating water is 1.8 l/min. The water supply rate with heating to a temperature of 25 °C is 5.8 l/...min. The flow-through system is designed for water pressure from 0.02 to 0.6 MPa (0.2-6 bar). The model uses overheating protection. Power is reset when heating up to 65 °C. The device automatically switches off when the heating element heats up to 95 °C. A wall bracket is used for installation. The water supply is lower. The model weighs only 5 kg. |
 |
Mission Air Hydro Bath 12kW | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
A powerful electric flow-through water heater, introduced to the market by the Mission brand in 2024. This modification uses a 12,000 W heating element. A 3-phase network is required to connect the device. The operating voltage is 400 V. This model is designed to service two water intake points simultaneously. The sealed housing (fully complies with the IP25 standard) allows you to install the device in the bathroom.
The housing has an LED screen for setting and displaying the temperature mode. Heating setting range: 30-60 °C. The Mission Air Hydro Bath 12kW flow-through electric water heater has increased productivity. The maximum water supply rate reaches 12 l/min. The minimum flow rate for heating water is 1.8 l/min. The water supply rate with heating to a temperature of 25 °C is 5.8 l/min. The flow-through system is designed for water pressure from 0.02 to 0.6 MPa (0.2-6 bar). The model uses overheating protection. Power is reset when heating up to 65 °C. The device automatically switches off when the heating element heats up to 95 °C. A wall bracket is used for installation. The water supply is lower. The model weighs only 5 kg.
Before buying always check characteristics and configuration of product with online store manager
