MTD 46 (11A-J1SJ600)
![]() | Outdated Product Type: lawn mower; Motor type: petrol; Cutting width (cm): 46; Height settings: 6; Grass ejection: rear ejection; in a bag; Bag type: soft; Bag volume (L): 60; Features: handle height adjustment; Motor power (hp): 2.3; Motor power (W): 1700; Weight (kg): 29; |
MTD 46
Engine:petrol
Power:1700 W, 2.3 hp
Cutting system:rotary
Capture width:46 cm
Cutting height:from 28 mm, up to 92 mm
Grass catcher:60 L
Weight:29 kg
All specifications
Specifications 46
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog MTD 2026 - new arrivals, bestsellers, and the most relevant models MTD.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog MTD 2026 - new arrivals, bestsellers, and the most relevant models MTD.

How to maintain a lawn mower to ensure its longevityBasic information about maintaining the lawn mower equipment

Lawn mower or trimmer: which is better to choose?The different types of garden tools for grass mowing are described below
Recommend for small plots This is a very good mower, easy to maintain, ALWAYS starts with half a pull. It doesn't consume oil, and I use 92-95 octane gasoline. It's advisable to keep an eye on and sharpen the blade, as it improves the quality of the grass cutting. I recommend it to everyone, you won't regret it! After extended use, the rear wheels start to spread apart. The mower is not self-propelled, and there is significant load with a bag of wet grass on the rear supports. However, this is not critical; the bushings can be disassembled and the plates to which they are attached can be straightened. Also, do not leave the mower outside overnight, as it is sensitive to dew and rain, and will start to rust. use MTD 46 month or more |
Add Review
We recommendCompare using chart →



























