Catalog   /   Climate, Heating, Water Heating   /   Water Supply & Pumps   /   Pressure Tank Units   /   Optima

Optima OP370 IA

Photos - Pressure Tank Unit Optima OP370 IA
Photos 3
Outdated Product
Type: pressure tank unit; Suitable for: clean water; Maximum performance (L/h): 3000; Maximum head (m): 30; Suction height (m): 9; Motor power (W): 370; Country of origin: Poland; Dimensions (mm): 290x230x250; Weight (kg): 10;
E-Catalog UK uses affiliate links compensated by our partners.
Find prices on Amazon.uk
Find prices on eBay.uk
add to listmy lists
We recommend products in stockPressure Tank Units Optima →
Optima OP370 IA
370 W
550 W
750 W
Main
Suitable forclean water
Specs
Maximum performance3000 L/h
Maximum head30 m
Max. pressure5 bar
Suction height9 m
Maximum liquid temperature40 °С
pH value4 – 10
Suction systemsingle-stage
Outlet size1"
Inlet hole size1"
Engine
Maximum power370 W
Power sourceelectric
Mains voltage230 В
General specs
Noise level50 dB
Country of originPoland
Pump housing materialplastic
Dimensions290x230x250 mm
Weight10 kg
Added to E-CatalogJanuary 2021
P/N
000019129

19129

Equipped with an intelligent frequency converter.
The frequency converter allows you to smoothly start and stop the operation of the station and more accurately control the water pressure in the system.
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Optima 2026 - new arrivals, bestsellers, and the most relevant models Optima.
How to Choose a Pumping StationWe talk about the key parameters when choosing a pumping station: power, performance, placement and equipment.
User reviews 1
Write Review →
The station paid off. Suitable for a small house. Low noise.
15 December 2021 
I am satisfied with the station. I live in a private sector, with a system pressure of 2.3 kg. When the faucet was open, the pressure dropped to 1.0 kg, which was not enough for a second water source, and the water heater would also shut off. After installing the station, the pressure is sufficient for two points, it drops to 1.9 at a set pressure of 2.3, but the flow is enough and the water heater continues to work, which was my goal. Initially, the station was noisy, but over time the noise level decreased to 65 dB in the immediate vicinity. When using a faucet in the kitchen or using the toilet, the station is almost inaudible. The plumbing system works much better now, allowing for a proper shower and bathtub fill-up without having to monitor the water heater.

The station's interface has many settings, the implications of which are unfortunately not mentioned in the manual. I would like to know what the parameters displayed on the screen affect when pressing the power button multiple times. During operation, I noticed an issue where it gives errors E8 and E3, indicating a pressure sensor error and a locked rotor. The errors disappear after 30 seconds, and the station returns to working condition. Possibly, the pressure sensor responds late, causing the station to stop according to these readings. It might be adjustable by changing the parameters, which are not described in the manual (I will try to install a hydropneumatic tank later).

The suction and discharge are 1 inch, respectively, and are made quite well.
Dimensions. acceptable design. Possibility of mounting on the wall. Good packing. Instructions in plain language. Included are hose connections and a filter, most likely for a barrel. Minimum controls. Little power. Soft start and stop. Automatic transition to working mode after stop by mistake.
Not a complete guide. The body plastic is flimsy. Inertial automation. Frequent errors on the pressure sensor and the blocked rotor.
use Optima OP370 IA less than month
Discuss 
 Show Original
Add Review
Catalog
  /  
Pressure Tank Units
  /  
Optima
  /  
Pressure Tank Unit Optima OP370 IA