Dark mode
United Kingdom

Prana 150 Eco Energy

Photos - Recuperator / Ventilation Recovery Prana 150 Eco Energy
Videos 1Photos 8
Outdated Product
System type: decentralized; Ventilation type: recuperator; Mounting: wall; Mounting diameter: 162; Max. noise level (dB): 36; Type of heat exchanger: plate; Heat exchanger material: copper; Heater type: electric afterheater; Heater power: 55; Control via Internet; Power consumption in ventilation mode (W): 32
add to listmy lists
Prana 150 Eco Energy
Prana 150 Eco Energy
System type
decentralized
Ventilation type
recuperator
Mounting
wall
Mounting diameter
162 mm
Maximum air flow (recuperation)
105 m³/h
Number of fan speeds
10
Minimum noise level
21 dB
Maximum noise level
36 dB
Type of heat exchanger
plate
Heat exchanger material
copper
Heat exchanger efficiency
91 %
Heater type
electric afterheater
Heater power
55 W
Minimum operating temperature
-30 °C
Remote control
Control via Internet
Display
Power consumption in ventilation mode
32 W
Power consumption (reheater + ventilation)
87 W
Mains voltage
230 V
Minimum wall thickness
450 mm
Decorative panel thickness
50 mm
Country of origin
Ukraine
Dimensions
535x150x150 mm
Added to E-Catalog
july 2021
It has 2 temperature sensors, a humidity sensor, the ability to work in automatic mode. Simultaneous operation of supply and exhaust.
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Prana 2024 - new products, best sales and most actual models Prana.
Video reviews

Continuous ventilation

Many air handling units operate cyclically: first, outside air is driven into the room, and then in the opposite direction. Prana recuperators have a slightly different principle of operation. They supply air and exhaust at the same time. In this case, the streams do not mix. Each of them passes through its own section of the copper heat exchanger. The air from the room on the way out gives up its heat to the heat exchanger, and the flow entering inside is heated by this energy. The efficiency of the heat exchanger installed in Prana 150 Eco Energy reaches 95%. If it is cold outside, then the air entering the room can be additionally heated using the built-in electric heater, increasing its temperature by another 3-4 degrees. Air flows are practically not cleaned in any way (at the entrance there is only a mesh that traps large debris, fluff and insects). But the manufacturer provides an opportunity to buy a carbon filter as an additional accessory.

Flexible configuration, autonomous operation and control from a smartphone

Depending on the speed of the fan (it has 10 speeds for maximum fine tuning), the unit consumes from 4 to 68 watts per hour (the included mini-heater adds another 30 to 55 Wh). The device is equipped with built-in temperature and humidity sensors (a slightly more “advanced” version of Prana 150 Eco Life additionally has CO2 and VOC sensors). On the “autopilot”, the heat exchanger can monitor the air quality in the room and select the optimal fan speed based on the indicators of the devices. You can also control the device using the remote control or through the Prana Online mobile application.

Compact and efficient, but not very cheap

The manufacturer recommends installing the Prana 150 Eco Energy heat exchanger in rooms up to 60 m2. This unit is very compact. In fact, it is a "pipe" with a diameter of 162 mm. The decorative panel with the display protruding into the room has a thickness of only 50 mm. Therefore, the air handling unit is discreetly built into any corner where it is possible to drill a hole to the outside, and is not conspicuous. But it should be noted that this heat exchanger is far from cheap (the price is under $600 – not so little in our area) because of its "smart" electronics, copper heat exchanger and other "chips".

Filters
Models
Brands
(system) 
decentralized 
Out of stock
150 Eco Energy