Sheriff ZX-1090
![]() | Outdated Product Type: car; Communication type: 2-way communication; Independent security zones: 8; silent arming mode; silent arming/disarming; automatic arming; delayed arming; engine on mode; perimeter protection; Anti-Hi-Jack; two-stage disarming; service / valet mode; locking doors while driving; panic mode |
Sheriff ZX-1090
Type:car
Protection zones:8
Communication type:2-way
Key fob:display
Additional:anti-scan
Set:immobilizer, siren
Shock / vibration sensor:2 levels
All specifications
Specifications ZX-1090
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Sheriff 2026 - new arrivals, bestsellers, and the most relevant models Sheriff.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Sheriff 2026 - new arrivals, bestsellers, and the most relevant models Sheriff.
I have been using it for six months, I like it, I recommend it!!! On this site, I took an expensive loan for about UAH 920. The alarm is normal, autostart is generally beautiful there were problems during installation, pay attention to troubleshooting, several times there were glitches, then the open trunk shows, then the door, after a while it passed. There were several times that I started in gear (mechanical gearbox), there was a case at -20C, when you use autostart, make sure that the oil in the engine and gearbox does not freeze, I have -40 oil in the engine and the gearbox is frozen!!! use Sheriff ZX-1090 month or more |
Installed the Sheriff ZX-1090 PRO alarm on a Daewoo Lanos - https://youtu Price Glitches use Sheriff ZX-1090 month or more |
for your money - super. A year later, it started to stutter. In winter (and in summer, too), sometimes it starts the engine itself, i.e. you arm, leave, and after 10 minutes the key fob beeps that the engine is running. At the same time, EVERYTHING that is responsible for launching by time / temperature, etc. is turned off in the settings. use Sheriff ZX-1090 month or more |
Add Review
Standard system features:
Security:
Security:
- Dynamic code CFMII.
- Passive/active arming of the system.
- Remote activation/deactivation of the passive arming (anti-distraction) function of the system.
- Separate control of security on/off modes.
- Possibility of disarming in two stages (AV-function).
- Passive immobilizer function with the ability to work with an external displacement sensor.
- Programmable personal code to disable and control the system.
- Protection when the engine is running.
- The ability to manually arm the system in full protection mode at any time using the "Valet" button, even in the absence of an ignition key.
- Remote control of the Panic function in all modes.
- 8 protection zones.
- Immediate activation of the alarm signaling when the system power is turned off / on in the "Protection" mode.
- Emergency call with the "Call" button from inside the car.
- External input for arming the system or activating the anti-robbery function.
- Two circuits of additional interlocks of NC-, NO-type (installation of an additional relay is required).
- Control of code blocking relay R350 (additional option, not included).
- Remote activation.
- Automatic activation when the ignition is turned on or the Stop (+) line is triggered.
- Automatic activation by motion sensor (Sensor 2 TMS207).
- External input for emergency activation of the Anti-Hi-Jack function in any system mode.
- Remote control of system functions, setting parameters from the key fob.
- Silent communication control mode (manual mode), checking, updating the status of the LCD screen.
- Programmable polite backlight delay 5/35/60 sec.
- Limited time alarm mode.
- Fault zone bypass.
- Memory of states, operations.
- The function of controlling the key fob-transmitter to turn on the ignition of the car in any state of the system.
- Built-in universal power output for controlling door locks.
- Automatic safe locking of doors when the ignition is turned on, by pressing the "Stop" pedal, by a signal from an external motion sensor TM-S207.
- Safe sequential opening of the driver's and then the passenger doors of the car, including when the ignition is turned off.
- Remote, from the key fob, control of the siren channel in armed mode (disable / enable — night mode, delay 10 seconds).
- Remote, from a charm, shutdown of confirming signals of a siren.
- Multifunctional control of automatic engine start for automatic transmission and manual transmission, gasoline, diesel.
- Engine start control by tachometer, battery charging, alternator or oil pressure sensor.
- Automatic shutdown of a running engine when the system is armed with a key fob transmitter (manual gearbox), as well as in passive and manual arming modes.
- Control of battery charging of a running engine.
- Run from an external device.
- Temperature trigger (external sensor).
- Stop the engine when the pre-set warm-up temperature is reached.
- Automatic start at specified time intervals.
- Automatic start of the engine at the set time, regardless of the connection with the key fob-pager.
- Remote (from key fob) change of engine start/stop parameters.
- Programmable output for control of crawlers of regular immobilizers.
- Selecting the mode of operation of the light during autorun.
- Car engine start control with "Start/Stop" button.
- Diagnostics of startup errors.
- Two connectors for connecting two-level sensors (shock, volume, movement).
- Temporary shutdown of shock sensors when arming.
- Activation of passive blocking of the engine and the function "Anti-Hi-Jack" (anti-seizure) on a signal from sensor 2.
- Switching off a running engine on a signal from sensor 2 (motion) in autostart, turbo timer, stop mode or backup mode for vehicles with a manual transmission.
- Management of the regular module "Comfort" of the car.
- Search for a car in the parking lot.
- Parking timer, movement.
- Autostart alarm clock.
- Remote monitoring of the system status with on-board voltage and temperature checks.
- Remote control of the "Valet" mode.
- "Save" mode — power saving control of the two-way communication key fob.
- Management of regular car alarm systems.
- Remote control of the "Turbotimer" function (on/off, selection of operating time).
- Programming the duration of output service pulses.
- Reassignment of outputs of channels CH2, CH3 and door blocking.
- Built-in tail light control relay.
