Tesy IWH 35 X02 KI
 | Outdated Product $64.96 up to $81.96 Type: tankless; Energy source: mains; Power source: 230 V; Power consumption (W): 3500; Performance (Δt ~25 °C) (L/min): 2; Heating elements: 1; Pipe connection: bottom; Dimensions (cm): 20x13x7.6; |
 |
Tesy IWH 35 X02 KI | |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
Before buying always check characteristics and configuration of product with online store manager
Catalog Tesy 2024 - new products, best sales and most actual models Tesy.
Inexpensive electric water heater with faucet
The compact and affordable instantaneous electric water heater Tesy IWH 35 X02 KI is designed to provide hot water to one point of water intake. The device has a flat plastic body with a faucet and handles for adjusting the supply of hot and cold water. Inside the housing is a heating coil that heats the water passing through the device. The power of the heating element is 3500 watts. When the faucet, marked in red, is opened, the appliance automatically turns on (and automatically turns off when closed). The water temperature is adjusted by changing the strength of the jet in the red tap. With an increase in flow, the temperature decreases, and with a decrease in the jet, it rises. With an average flow (2 l / min), the water heater is able to increase the temperature of the water passing through it by 25 ° C. If only cold water is required, use the blue faucet. It is not connected to the heating element and does not activate the appliance.
Connecting a non-pressure instantaneous water heater
This water heater is designed for use with non-pressure water systems only. This means that when connected to a centralized water supply system, before the cold water enters the device, it is necessary to install a reduction gear or a valve to adjust the pressure. The water heater faucet is mounted on a cold water pipe coming out of the wall (the pipe should be a standard 1/2″ size). Inside the water heater there is a coarse filter that traps fine solid particles. It needs to be cleaned periodically. The body of the water heater is attached to the wall with two screws and two dowels. Given the power of 3500 W (like an electric kettle and an electric stove together), the plug of the appliance should only be connected to reliable sockets that can withstand currents up to 16 A.
A good choice for a washbasin
Electric heaters such as the Tesy IWH 35 X02 KI are ideal for installation above the sink in the kitchen or next to the sink in the garage, workshop or office washroom. Although this appliance is not capable of dispensing hot water, it can meet basic needs by providing warm water for rinsing hands or washing dishes.
