Dark mode
United Kingdom

Thermex IF 50 Smart

Photos - Boiler Thermex IF 50 Smart
£205.00 
Buy!
Amazon.co.uk

Thermex IF 50 Smart Storage Water Heater Flat 50 Litre Storage hot Water Heater UK THEBOIIF50SMA

Amazon.co.uk
Delivery: to United Kingdom
Report
add to listmy lists
Thermex IF 50 Smart
Main
Typestorage
Energy sourcemains
Installationuniversal (wall)
Tank volume50 L
2 tanks
Tank shapeflat
Technical specs
Power source230 V
Power consumption2000 W / 1300/700 W /
Heating modes3
Max. water temperature75 °C
Tank liningglass ceramics / bioglass-porcelain /
Water supplywith pressure
Heating time66 min / at ∆t=45 °C /
Magnesium anode
Heating elements2 / 700+1300 W /
Heating element typewet heater
Features
Functionsthermostat
Smart (auto mode)
display
Safety systemsoverheat protection
frost protection
electrical protection (RCD)
safety valve
General specs
Controlselectronic
Controls layoutfront
Pipe connectioninstallation dependent
Tank manufacturer's warranty5 years
Dimensions (HxWxD)88x45.2x26.3 cm
Weight19 kg
Official Websitethermex.ua
Added to E-Catalogoctober 2019
Compact dimensions. Small own weight. High heating temperature. 3-stage heating. Display.
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Thermex 2025 - new products, best sales and most actual models Thermex.

Thermex IF 50 Smart configurations

Price for Thermex IF 50 Smart
Thermex IF 30 Smart from £165.001 offer
Thermex IF 50 Smart from £205.001 offer
Thermex IF 80 Smart from £195.001 offer

Inexpensive model with smart control

The Thermex IF 50 Smart flat storage water heater with dimensions of 880x452x263 mm is one of the most compact in its class, and its own empty weight of 19 kg gives a moderate load when mounted on a wall. This is an inexpensive model, which is made in a plastic case with 2 internal tanks with a total volume of 50 liters, coated with bioglass porcelain. The device must be connected to a cold water supply with a pressure range of 0.5 – 7 bar. If the water pressure values do not correspond to those indicated, then a pressure reducing valve should be installed at the inlet. Two “wet” heating elements with a total power of 2 kW, operating in a 3-stage mode, are responsible for heating the water in the device. The average tank heating time at full power at Δt=45 °C is 66 minutes, which, to paraphrase in ordinary language, will provide comfortable conditions for hot water use in a little more than an hour when the boiler is turned on.

Three degrees of heating

The standard equipment of the device with a magnesium anode protects the heating elements and the surface of the tanks from limescale, and the built-in thermostat maintains the selected water heating temperature: 55 °C, 65 °C or 75 °C. The instrument has built-in overpressure protection, overheating protection above 95 °C and frost protection below 5 °C. On the electronic display of the control panel, where the symbols of the indicators are placed diagonally for ease of operation in vertical or horizontal installation, you can set one of 3 degrees of heating or activate the automatic Smart mode of the water heater. When switched to intelligent control mode, the electronics monitors the user's habits for a week and sets the appropriate parameters for preparing hot water at the right time. The manufacturer establishes a 5-year factory warranty for internal tanks and a 2-year warranty for other structural elements, declaring a minimum operational life of the device of 9 years.

Filters