United Kingdom

Thermex MK 50 V (151 002)

Photos - Boiler Thermex MK 50 V
Outdated Product
Designed for vertical installation, a storage water heater with a flat body, positioned by the manufacturer as a relatively affordable mid-range solution. The 50 liter stainless steel tank is protected from overpressure, and the magnesium anode increases the protection of the product from oxidation. The unit is hung vertically on a load-bearing wall, and the piping is connected from below to the colour-coded terminals. In automatic mode, the Thermex MK 50 V boiler works according to the commands of the built-in thermostat, and the controls and the liquid crystal display for visual status control are placed on the front panel. The heating element is a 2-kW heating element of a conventional design, and for its connection to a single-phase electrical network, it is recommended to lay an indiv...idual power cable to the switchboard. The contents of the tank are brought to operating temperature in 80 minutes. The manufacturer provides protection against overheating, and the stated warranty for the tank is 7 years.
add to listmy lists
Thermex Mechanik [MK 50 V]
Thermex MK 50 V
Main
Typestorage
Energy sourcemains
Installationvertical
Tank volume50 L
2 tanks
Tank shapeflat
Technical specs
Power source230 V
Power consumption2000 W
Heating modes3
Tank liningstainless steel
Water supplywith pressure
Heating time80 min
Magnesium anode
Heating elements1
Heating element typewet heater
Features
Functionsthermostat
display
Safety systemsoverheat protection
electrical protection (RCD)
safety valve
General specs
Controlsmechanical
Controls layoutfront
Pipe connectionbottom
Tank manufacturer's warranty7 years
Dimensions (HxWxD)85.9x43.4x26.5 cm
Added to E-Catalogjuly 2017
P/N
151 002

Designed for vertical installation, a storage water heater with a flat body, positioned by the manufacturer as a relatively affordable mid-range solution. The 50 liter stainless steel tank is protected from overpressure, and the magnesium anode increases the protection of the product from oxidation. The unit is hung vertically on a load-bearing wall, and the piping is connected from below to the colour-coded terminals.

In automatic mode, the Thermex MK 50 V boiler works according to the commands of the built-in thermostat, and the controls and the liquid crystal display for visual status control are placed on the front panel. The heating element is a 2-kW heating element of a conventional design, and for its connection to a single-phase electrical network, it is recommended to lay an individual power cable to the switchboard. The contents of the tank are brought to operating temperature in 80 minutes. The manufacturer provides protection against overheating, and the stated warranty for the tank is 7 years.

Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Thermex 2024 - new products, best sales and most actual models Thermex.
Filters
Models
Thermex (volume) 
≤ 15
16 – 30
Out of stock
Mechanik
31 – 50
Out of stock
Mechanik
51 – 80
81 – 100
Out of stock
Mechanik