Timberk Harmony UL 43E
Photos 8 | Outdated Product Type: humidifier; ultrasonic; Humidification area (m²): 30; Sterilization: air flow adjustment; night mode; timer; display; Controls: touch controls; Operating time (h): 10; Water consumption (mL/h): 300; Max. noise level (dB): 35; Power (W): 23; Power source: mains; |
Timberk Harmony UL 43E | |||||||||||||||||||||||||||||||||
|
Before buying always check characteristics and configuration of product with online store manager
Catalog Timberk 2024 - new products, best sales and most actual models Timberk.
Top filling of the water tank
The Timberk Harmony UL 43E ultrasonic humidifier is a compact (275x215x146 mm) and practical device for maintaining a healthy indoor climate up to 30 m². This interesting model pleases with the convenience of the top filling of the tank (Water TopFill), which now does not need to be removed and turned over to add water. The volume of the tank is small — only 3 liters, but the possibility of simple filling through the top hole makes this drawback insignificant. At the base of the unit is a water level sensor float that automatically turns off the humidifier when the tank is empty. Under the tank cover there is a special flavor compartment where you can add a few drops of oil with your favorite scent. The maximum capacity of the device 300 mL/h is enough to ensure the level of humidity in the room for several hours, and the capacity of the tank is enough for 10 hours of continuous operation.
Night mode "Sleep"
The device received a fully electronic control with a round display and 4 touch buttons. They are responsible for turning on the appliance, setting the off timer, adjusting the intensity of steam output and setting the relative humidity level. Performance can be selected from 3 fixed modes (low, medium, high), as well as a special night mode "Sleep". In the latter case, the humidifier will operate at a high spray level in a cyclic programme, alternating periods of activity (5 – 10 – 15 minutes) with a 5 minute pause between them. With the timer, you can set the time for turning off the device from among fixed values: 1, 2, 4 or 8 hours. The built-in hygrostat allows you to set the desired relative humidity in the room in the range from 40% to 90% in 5% increments. The real-time humidity value is displayed on the display, and when the set level is reached, the device automatically turns off. The model is available in 2 colours, marked in the marking with indexes E1 (white) and E2 (black).