Dark mode
United Kingdom
Catalog   /   Climate, Heating, Water Heating   /   Water Supply & Pumps   /   Submersible (Drainage) Pumps   /   Vitals

Vitals DPS 713s

Photos - Submersible Pump Vitals DPS 713s
Photos 3
Outdated Product
$70.64 up to $93.86
Type: submersible drainage pump; Suitable for: waste water; Maximum performance (L/h): 12900; Maximum head (m): 8; Min. liquid level (mm): 70; Maximum particle size (mm): 30; Mechanical impurities, up to (g/m³): 12000; Dry run protection; Grinder; Float switch; Motor power (W): 650; Protection class (IP): 68
add to listmy lists
Vitals DPS 713s
float switchgrinder
Main
Suitable forwaste water
Specs
Maximum performance12900 L/h / maximum /
Maximum head8 m / maximum /
Minimum liquid level70 mm
Maximum particle size30 mm
Mechanical impurities12000 g/m³
Maximum liquid temperature40 °С
pH value4 – 10
Dry run protection
Grinder
Float switch
Suction systemsingle-stage
Outlet size1", 1 1/4" and 1 1/2"
Engine
Maximum power650 W
Power sourceelectric
Mains voltage230 V
General specs
Protection class (IP)68
Country of originLatvia
Pump housing materialstainless steel
Impeller / auger materialstainless steel
Dimensions200x180x350 mm
Weight5.5 kg
Added to E-Catalogmarch 2016
It raises the pressure by 8.4 m up and plunges up to 8 m deep. Housing and drive shaft made of stainless steel. Light weight.
Plastic construction elements.
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Vitals 2024 - new products, best sales and most actual models Vitals.

Latvian Vitals DPS 713s is suitable for deploying systems for pumping moderately polluted sewage, removing liquid from flooded premises, supplying water to irrigation systems from open reservoirs.

Performance indicators

In operation, the pump relies on a 650-watt electric motor, sharpened in a stainless steel housing. A similar material is used in the design of the drive shaft. In maximum performance mode, the pump pumps 12.9 "cubes" of content per hour, providing a head of 8.4 m in height. The pump can be submerged up to 8 m deep.

Pumping drains

When working with a pump, it is permissible to pump drains with a temperature of up to 40 °C with an impurity density of 12 kg / m³, moreover, the size of mechanical particles should not exceed 30 mm. The pump must be turned on less than 20 times per hour. The reference point for turning off the device is the position of the float switch, which the device is equipped with as standard.

Ease of handling

The pump is installed on a solid base or works on weight, for which you need to hang it on a cable by the handle. Fortunately , a small weight (about 5.5 kg) contributes to the ease of handling the device. Minor complaints are caused only by the plastic elements of the model's construction. But in light of the affordable cost of Vitals DPS 713s, one can safely close one's eyes to this fact.

Filters
Vitals DPS 713s often compared
Werk WQD12