Zilan ZLN 2830 4.2 kW
 | Expecting restock A powerful and safe infrared gas convector with ceramic radiating elements for use in warehouses and utility areas. It has a floor-standing design and can move freely on roller supports. It is positioned as a product of the upper part of the middle price category of 2024, aimed at a wide range of users who need an infrared heater to service spacious rooms from 20 to 40 m². It is powered by a built-in gas cylinder (SPBT), the capacity of which is enough for 129 hours of continuous operation in minimum power mode. This device converts the energy released during gas combustion into thermal radiation. Three sections of ceramic emitters are heated to a high temperature by the flame of gas burners and emit infrared rays. In this case, first of all, objects in the room are heated, and the air is...heated by the heated objects. The infrared gas convector Zilan ZLN 2830 has a simple and time-tested design, which is highly reliable and durable. It shows a decent efficiency of converting combustion energy into infrared radiation. The total operating power of the device when all three sections of the heaters are operating reaches 4.2 kW. Two active sections produce up to 2.8 kW of heat, and one - 1.4 kW. It works almost silently. It is worth noting that this heater generates gas combustion products that must be removed using exhaust ventilation. |
 |
Zilan ZLN 2830 | |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
A powerful and safe infrared gas convector with ceramic radiating elements for use in warehouses and utility areas. It has a floor-standing design and can move freely on roller supports. It is positioned as a product of the upper part of the middle price category of 2024, aimed at a wide range of users who need an infrared heater to service spacious rooms from 20 to 40 m². It is powered by a built-in gas cylinder (SPBT), the capacity of which is enough for 129 hours of continuous operation in minimum power mode.
This device converts the energy released during gas combustion into thermal radiation. Three sections of ceramic emitters are heated to a high temperature by the flame of gas burners and emit infrared rays. In this case, first of all, objects in the room are heated, and the air is heated by the heated objects. The infrared gas convector Zilan ZLN 2830 has a simple and time-tested design, which is highly reliable and durable.
It shows a decent efficiency of converting combustion energy into infrared radiation. The total operating power of the device when all three sections of the heaters are operating reaches 4.2 kW. Two active sections produce up to 2.8 kW of heat, and one - 1.4 kW. It works almost silently. It is worth noting that this heater generates gas combustion products that must be removed using exhaust ventilation.
Before buying always check characteristics and configuration of product with online store manager
Catalog Zilan 2025 - new products, best sales and most actual models Zilan.
Autonomous propane convector
The Zilan ZLN 2830 convector is an effective heating device that does not require connection to an electrical network or gas main. It runs on propane from a cylinder that is installed inside the housing and connected to the burner through a reducer. For ease of movement, the convector is equipped with wheels that rotate 360°, which makes it easy to move around the room and install it in the right place.
Device design
The basis of the convector's operation is a ceramic panel consisting of three separate plates. Each plate has a porous structure, due to which it acts as a micro-torch burner, effectively burning gas. Ceramics heat up to a high temperature and transfer heat to the surrounding space through infrared radiation.
The Zilan ZLN 2830 gas convector is equipped with a piezoelectric element for reliable flame ignition and a heating mode switch. Depending on the need, you can select modes with a thermal power of 1400, 2800 or 4200 W. When operating at maximum power, fuel consumption is about 300 g of propane per hour.
Security measures
Like all devices with a similar operating principle, it is recommended to use the convector in rooms with good ventilation or at least with the possibility of regular ventilation. For operational safety, a built-in valve is provided that automatically shuts off the gas supply and turns off the flame if the device accidentally tips over.
