Grinders & Polishers Einhell mains
All models Advanced filters → |
You might be interested in
Articles, reviews, useful tips
All materials![](/posts/files/5871/medium_pic.jpg)
Proper storage methods for power tool batteries
Conditions under which batteries will not lose capacity during extended storage
![](/posts/files/3518/medium_pic.jpg)
What is the best screwdriver?
Among thousands of screwdrivers, you can find one that surpasses the rest in all respects. Or is it impossible?
![](/posts/files/5259/medium_pic.jpg)
Five good big chain grinders
Large and powerful grinders for working with nozzles with diameter of 220 mm
![](/posts/files/5872/medium_pic.jpg)
How does an expensive grinder differ from a cheap one?
Design features and other factors affecting the quality and price of an angle grinder
![](/posts/files/3397/medium_pic.jpg)
One battery for the whole tool: multi-platform battery series
The concept of using a universal battery for cordless tools is gaining momentum
![](/posts/files/4822/medium_pic.jpg)
Five great cordless jigsaws for the home workshop
Cordless tools for sawing boards, cutting sheet lumber and cutting thin metal workpieces
Grinders & Polishers: specifications, types
Type
The type of grinder determines the design features and the operation of its working mechanism.
— Corner. One of the most common and versatile types of grinders. The name is due to the device of the working mechanism, in which the drive axle and the spindle with the working nozzle are located at an angle of 90 degrees and are connected through a gearbox. It is this type of grinders that is unofficially called "grinders". The working tool is a grinding wheel. Angle grinders are used for grinding, polishing, roughing and stripping metal, concrete, brick, cement, marble and granite products. Design features also allow the use of such a tool for cutting metal and cleaning welds.
— Direct. In straight grinders, the drive shaft of the electric motor and the spindle with the working nozzle are located on the same axis, which led to the name. Most often they are used for small and precise work, they are convenient for processing hard-to-reach surfaces (the length of the spindle is of great importance). As a working tool, finger and conical grinding wheels, cutters, brushes can be used. Not designed for use with large grinding wheels such as those used in angle grinders.
— Tape. The working element of such grinders is a sanding belt connected into a ring and moving along guide rollers. Such devices are designed for rough processing and leveling of flat surfac...es, as well as the preparation of edges and bevels. Tape models have a fairly high performance, but are not designed for accurate delicate processing; in addition, they are intended mainly for relatively narrow parts, the width of which does not exceed the length of the tape (brush / drum devices are better suited for large surfaces — see below). Also note that grinders of this type do best with wood, although sanding belts are also available for other materials, including metal, concrete, plastic.
— Eccentric. In eccentric grinders, the working tool (sanding sheet) performs two movements simultaneously: rotational and vibrating. Due to this, high quality processing is achieved with good performance. These machines are well suited when a large amount of material has to be removed during fine finishing work. Unlike vibration grinding, they allow you to process not only flat, but also convex and concave surfaces.
— Vibrating. Orbital sanders use a vibrating sanding sheet driven by an eccentric on the motor shaft. With a relatively low productivity, such a scheme provides high accuracy and quality of processing. Vibration grinders are used for fine finishing of flat surfaces.
— Delta grinding. In fact, they are a kind of vibration grinders (see above), but they differ from them in the shape of the grinding sheet: it is triangular, resembling the Greek letter “delta” in shape (hence the name). Due to this, as well as their small size, these machines are well suited for working in hard-to-reach and difficult places, such as corners, edges, curves, etc.
— Multifunctional. Machines operating on the vibration principle, however, combining the capabilities of several varieties at once. Such versatility is realized through interchangeable soles, which, usually, are supplied in the kit. Thanks to such accessories, a multifunctional grinder is able, at a minimum, to turn from a conventional vibrating (with a rectangular sole) to a delta sander (with a triangular one) and vice versa; and some models are also equipped with a round nozzle and can also work in the eccentric format. Such a tool will be the best choice for those who have to deal with a wide variety of tasks for a vibration format machine: one universal machine with a set of interchangeable accessories is much cheaper than several more traditional tools with similar characteristics. On the other hand, a multifunctional model handles worse with each specific task than a specialized unit of a similar cost. Simply put, at the same price, a universal machine “can” more, but a specialized one (vibrating, delta grinding, etc.) is more effective in its particular area.
— Polishing. A type of angle grinder specifically designed for finishing various surfaces. Technically capable of working in grinding mode, however, the main function is still polishing and final finishing of the material.
— Brush / drum. Grinders of this type are generally similar in layout to angle grinders (see above), and the main difference is that the working nozzle does not have the shape of a flat disk, but of a characteristic cylinder, the length of which noticeably exceeds the diameter. If such a cylinder has hard bristles (usually metal) — the machine is called a brush, in other cases — a drum; however, there is no fundamental difference between these varieties, in addition, many models allow the use of both types of nozzles. This nozzle format is especially suitable for processing large flat surfaces, for which tape machines are poorly suited; specifically, the brushes are very effective, in particular, when removing paint and varnish coatings. On the other hand, removing paint is just one of many tasks that sanders have to deal with; and with other types of work available for this type of machine, vibration (including delta grinding) and eccentric models (see above) also do a good job. In addition, rotating cylindrical nozzles are not particularly accurate, they are not suitable for delicate work that requires care and precision. That is why grinders of this type are relatively rare nowadays.
— Wall grinder. A specific feature of most wall grinders is an elongated design that includes a characteristic rod (see "Complete set"). This allows you to grab a large section of the wall without moving from your place, as well as work at high heights without using stools or other similar supports. However, wall grinding models are produced without a rod. Such devices, usually, are a slightly modified version of the angle machines described above. Of the differences, in addition to the use of a rod, one can also mention the method of attaching the working nozzle — it is installed on Hook-and-loop or other similar devices, similar to how it is done in an eccentric tool.
— Grinder for concrete. Most stone/concrete grinders are similar in design to angle grinders (see above), although there are other variations. Anyway, such tools are quite powerful, and their design is designed for long-term operation in difficult conditions: for example, overload protection is often found (see "Additional"), a system for supplying water to the place of work, etc. can be provided.
— Corner. One of the most common and versatile types of grinders. The name is due to the device of the working mechanism, in which the drive axle and the spindle with the working nozzle are located at an angle of 90 degrees and are connected through a gearbox. It is this type of grinders that is unofficially called "grinders". The working tool is a grinding wheel. Angle grinders are used for grinding, polishing, roughing and stripping metal, concrete, brick, cement, marble and granite products. Design features also allow the use of such a tool for cutting metal and cleaning welds.
— Direct. In straight grinders, the drive shaft of the electric motor and the spindle with the working nozzle are located on the same axis, which led to the name. Most often they are used for small and precise work, they are convenient for processing hard-to-reach surfaces (the length of the spindle is of great importance). As a working tool, finger and conical grinding wheels, cutters, brushes can be used. Not designed for use with large grinding wheels such as those used in angle grinders.
— Tape. The working element of such grinders is a sanding belt connected into a ring and moving along guide rollers. Such devices are designed for rough processing and leveling of flat surfac...es, as well as the preparation of edges and bevels. Tape models have a fairly high performance, but are not designed for accurate delicate processing; in addition, they are intended mainly for relatively narrow parts, the width of which does not exceed the length of the tape (brush / drum devices are better suited for large surfaces — see below). Also note that grinders of this type do best with wood, although sanding belts are also available for other materials, including metal, concrete, plastic.
— Eccentric. In eccentric grinders, the working tool (sanding sheet) performs two movements simultaneously: rotational and vibrating. Due to this, high quality processing is achieved with good performance. These machines are well suited when a large amount of material has to be removed during fine finishing work. Unlike vibration grinding, they allow you to process not only flat, but also convex and concave surfaces.
— Vibrating. Orbital sanders use a vibrating sanding sheet driven by an eccentric on the motor shaft. With a relatively low productivity, such a scheme provides high accuracy and quality of processing. Vibration grinders are used for fine finishing of flat surfaces.
— Delta grinding. In fact, they are a kind of vibration grinders (see above), but they differ from them in the shape of the grinding sheet: it is triangular, resembling the Greek letter “delta” in shape (hence the name). Due to this, as well as their small size, these machines are well suited for working in hard-to-reach and difficult places, such as corners, edges, curves, etc.
— Multifunctional. Machines operating on the vibration principle, however, combining the capabilities of several varieties at once. Such versatility is realized through interchangeable soles, which, usually, are supplied in the kit. Thanks to such accessories, a multifunctional grinder is able, at a minimum, to turn from a conventional vibrating (with a rectangular sole) to a delta sander (with a triangular one) and vice versa; and some models are also equipped with a round nozzle and can also work in the eccentric format. Such a tool will be the best choice for those who have to deal with a wide variety of tasks for a vibration format machine: one universal machine with a set of interchangeable accessories is much cheaper than several more traditional tools with similar characteristics. On the other hand, a multifunctional model handles worse with each specific task than a specialized unit of a similar cost. Simply put, at the same price, a universal machine “can” more, but a specialized one (vibrating, delta grinding, etc.) is more effective in its particular area.
— Polishing. A type of angle grinder specifically designed for finishing various surfaces. Technically capable of working in grinding mode, however, the main function is still polishing and final finishing of the material.
— Brush / drum. Grinders of this type are generally similar in layout to angle grinders (see above), and the main difference is that the working nozzle does not have the shape of a flat disk, but of a characteristic cylinder, the length of which noticeably exceeds the diameter. If such a cylinder has hard bristles (usually metal) — the machine is called a brush, in other cases — a drum; however, there is no fundamental difference between these varieties, in addition, many models allow the use of both types of nozzles. This nozzle format is especially suitable for processing large flat surfaces, for which tape machines are poorly suited; specifically, the brushes are very effective, in particular, when removing paint and varnish coatings. On the other hand, removing paint is just one of many tasks that sanders have to deal with; and with other types of work available for this type of machine, vibration (including delta grinding) and eccentric models (see above) also do a good job. In addition, rotating cylindrical nozzles are not particularly accurate, they are not suitable for delicate work that requires care and precision. That is why grinders of this type are relatively rare nowadays.
— Wall grinder. A specific feature of most wall grinders is an elongated design that includes a characteristic rod (see "Complete set"). This allows you to grab a large section of the wall without moving from your place, as well as work at high heights without using stools or other similar supports. However, wall grinding models are produced without a rod. Such devices, usually, are a slightly modified version of the angle machines described above. Of the differences, in addition to the use of a rod, one can also mention the method of attaching the working nozzle — it is installed on Hook-and-loop or other similar devices, similar to how it is done in an eccentric tool.
— Grinder for concrete. Most stone/concrete grinders are similar in design to angle grinders (see above), although there are other variations. Anyway, such tools are quite powerful, and their design is designed for long-term operation in difficult conditions: for example, overload protection is often found (see "Additional"), a system for supplying water to the place of work, etc. can be provided.
Rated pressure
The air pressure that the air powered grinder is designed to handle (see "Power Source"). It is this pressure that should ideally be supplied to the tool from the compressor: if the pressure is too low, work efficiency will deteriorate, if the pressure is too high, it is fraught with breakdowns and accidents.
Air consumption
The amount of air consumed when operating a pneumatically powered machine (see "Power source"). This parameter allows you to assess whether the performance of a particular compressor is enough to operate the tool — the amount of air supplied to the machine must not be lower than its flow rate, otherwise normal operation will be impossible.
Real power
Power delivered during work directly to the working nozzle. High power, on the one hand, contributes to performance, on the other hand, it significantly affects the dimensions, weight and price. Therefore, it is worth choosing a tool for this parameter, taking into account the specifics of the planned work; recommendations on specific power values for different types of work can be found in special sources.
Power consumption
The power consumed by the grinder during operation. Usually more than the output (useful) power (see above) due to losses during the conversion of energy from electrical to mechanical. However, the general patterns in this case are the same: a more powerful tool, on the one hand, is usually more performant, on the other hand, it is heavier, larger and more expensive. In addition, the total electricity consumption depends on this indicator; however, grinders, even the most powerful ones, consume relatively little energy, and difficulties can arise only when connecting a high-performance professional tool to weak electrical wiring.
Note that it is much easier to determine the consumed power than the useful one; therefore, only this parameter is often indicated in the characteristics, without specifying the useful power. In general, it is quite possible to compare grinders of the same type using it (see above): a modern tool has approximately the same efficiency, and in most cases the useful power values bare related in the same way as the consumed values.
Note that it is much easier to determine the consumed power than the useful one; therefore, only this parameter is often indicated in the characteristics, without specifying the useful power. In general, it is quite possible to compare grinders of the same type using it (see above): a modern tool has approximately the same efficiency, and in most cases the useful power values bare related in the same way as the consumed values.
Rotation speed
The speed of rotation of the working attachment, which is capable of providing a grinder of the appropriate design (for example, angle — see "Type"). If the device has speed control, this paragraph shows the range of such adjustment, from minimum to maximum.
It makes sense to compare by this parameter units belonging to the same type and having the same maximum diameter of the disk (or other working nozzle). The latter is due to the fact that the larger the disk, the faster its edge moves (at the same speed); i.e. a larger diameter requires less RPM for the same performance/efficiency. In general, when comparing different models, the following should be taken into account. The higher rotation speed is well suited for large volumes of work (because it improves productivity) as well as for fine polishing with “delicate” nozzles. A lower setting, in turn, improves accuracy (reduces the chance of removing excess material), as well as provides more torque and allows you to more effectively deal with hard, stubborn materials. More detailed recommendations for different types of work and different nozzle diameters can be found in special sources; here we note that an increase in the rotation speed, usually, affects the cost of the machine compared to analogues (since this requires a more powerful engine). In addition, discs and other attachments may have maximum RPM limits.
It makes sense to compare by this parameter units belonging to the same type and having the same maximum diameter of the disk (or other working nozzle). The latter is due to the fact that the larger the disk, the faster its edge moves (at the same speed); i.e. a larger diameter requires less RPM for the same performance/efficiency. In general, when comparing different models, the following should be taken into account. The higher rotation speed is well suited for large volumes of work (because it improves productivity) as well as for fine polishing with “delicate” nozzles. A lower setting, in turn, improves accuracy (reduces the chance of removing excess material), as well as provides more torque and allows you to more effectively deal with hard, stubborn materials. More detailed recommendations for different types of work and different nozzle diameters can be found in special sources; here we note that an increase in the rotation speed, usually, affects the cost of the machine compared to analogues (since this requires a more powerful engine). In addition, discs and other attachments may have maximum RPM limits.
Max. disc diameter
The maximum disc size that can be installed in a grinder of the appropriate design (see “Type”). Most models are capable of working with nozzles of smaller diameter, but a rim that is too large simply will not fit on the tool due to size limitations.
The larger the disc, the larger the processing area and the depth of cut provided by the grinder. On the other hand, rotating a larger attachment requires corresponding power, which, in turn, affects the price, dimensions and weight of the entire tool. So you should choose according to this parameter taking into account the specific tasks for which you plan to use the machine. Detailed recommendations on this matter can be found in special sources; Here we note that discs are conventionally divided into small (up to 125 mm), medium (up to 230 mm) and large (230 mm or more).
The larger the disc, the larger the processing area and the depth of cut provided by the grinder. On the other hand, rotating a larger attachment requires corresponding power, which, in turn, affects the price, dimensions and weight of the entire tool. So you should choose according to this parameter taking into account the specific tasks for which you plan to use the machine. Detailed recommendations on this matter can be found in special sources; Here we note that discs are conventionally divided into small (up to 125 mm), medium (up to 230 mm) and large (230 mm or more).
Cutting depth
The greatest depth of cut provided by the grinder.
The depth of cut directly depends on both the engine power and the size of the disc. A greater depth of cut makes the tool more versatile, but it affects its weight, price and electricity consumption. So when choosing, it is worth considering the real features of the planned work.
The depth of cut directly depends on both the engine power and the size of the disc. A greater depth of cut makes the tool more versatile, but it affects its weight, price and electricity consumption. So when choosing, it is worth considering the real features of the planned work.
Oscillation speed
The frequency of vibration of the working attachment, which is capable of providing a grinder of the appropriate design (a classic example is vibration, see "Type"). If the device has an oscillation frequency adjustment, this paragraph gives the range of such adjustment, from minimum to maximum.
A higher frequency (with the same amplitude — see below) improves overall performance, especially when working with hard, stubborn materials, and also contributes to efficiency in delicate finishing (such as polishing). In turn, a lower frequency reduces the likelihood of making a mistake by removing an excessive amount of material. There are also more specific points related to this parameter; them, as well as recommendations for choosing the frequency for different jobs, materials and types of sanding sheets, can be found in special sources. Here, we note that individual sanding sheets may have their own limitations or recommendations regarding the operating frequency.
A higher frequency (with the same amplitude — see below) improves overall performance, especially when working with hard, stubborn materials, and also contributes to efficiency in delicate finishing (such as polishing). In turn, a lower frequency reduces the likelihood of making a mistake by removing an excessive amount of material. There are also more specific points related to this parameter; them, as well as recommendations for choosing the frequency for different jobs, materials and types of sanding sheets, can be found in special sources. Here, we note that individual sanding sheets may have their own limitations or recommendations regarding the operating frequency.
Oscillation amplitude
The amplitude of oscillations made during the operation of the nozzle of an eccentric, vibration or delta grinding type machine (see above). Along with the frequency (see above), it is one of the most important indicators of such machines. Higher amplitude provides more intensive processing, which has a positive effect on performance; on the other hand, for delicate work, it is desirable to have a small oscillation amplitude(less than 2 mm).
Belt speed
Belt speed provided by the grinder. For more information about belt units, see "Type". In this paragraph, both one value and a range can be given — if the device has a speed control (see "Additionally — Speed regulator").
Other things being equal (primarily the same belt width), a higher speed has a positive effect on productivity. On the other hand, to ensure such a speed, a more powerful engine is needed, which accordingly affects the weight, price and energy consumption of the entire tool. In addition, the low belt speed contributes to accuracy: the chance of removing excess material is reduced. So it’s definitely worth looking specifically for a “fast” grinder only if it is to be used often and for large volumes of work. In other cases, a slower model may well be the best option. More detailed recommendations on this matter (including for different materials and types of work) can be found in special sources.
Other things being equal (primarily the same belt width), a higher speed has a positive effect on productivity. On the other hand, to ensure such a speed, a more powerful engine is needed, which accordingly affects the weight, price and energy consumption of the entire tool. In addition, the low belt speed contributes to accuracy: the chance of removing excess material is reduced. So it’s definitely worth looking specifically for a “fast” grinder only if it is to be used often and for large volumes of work. In other cases, a slower model may well be the best option. More detailed recommendations on this matter (including for different materials and types of work) can be found in special sources.
Tape/sheet length
The length of the belt or sheet for which the grinder is designed.
Working nozzles in the form of sheets are used in units with a vibrational principle of operation, in the form of tapes — respectively, in tape ones (for more details on both, see "Type"). Anyway, this paragraph does not indicate the working length of the tape / sheet (that is, the length of the surface adjacent to the material being processed), but the total — that is, the size of the nozzle itself. This size in itself determines only the compatibility of the grinder with certain sheets / tapes. At the same time, clamp-like fastenings (see "Sheet fastening"), used in most classic vibrating instruments, often allow you to install sheets of slightly longer lengths than indicated in the specifications. Hook-and-loop models (mostly delta sanders) technically accept both longer and shorter sheets, although in fact this is not recommended at best. But in tape tools, the length of the tape must exactly match the parameter specified in this paragraph — even a slight deviation can lead to incompatibility.
As for the working length of the tape / sheet, it inevitably turns out to be less than the total (for sheets — not much, for tapes — quite significantly). However a longer tape/sheet often has a greater working length; however, with the same general dimensions of the nozzle, its working size in different tools may be different; it is indicated in the item "Sole Size" (see below).
Working nozzles in the form of sheets are used in units with a vibrational principle of operation, in the form of tapes — respectively, in tape ones (for more details on both, see "Type"). Anyway, this paragraph does not indicate the working length of the tape / sheet (that is, the length of the surface adjacent to the material being processed), but the total — that is, the size of the nozzle itself. This size in itself determines only the compatibility of the grinder with certain sheets / tapes. At the same time, clamp-like fastenings (see "Sheet fastening"), used in most classic vibrating instruments, often allow you to install sheets of slightly longer lengths than indicated in the specifications. Hook-and-loop models (mostly delta sanders) technically accept both longer and shorter sheets, although in fact this is not recommended at best. But in tape tools, the length of the tape must exactly match the parameter specified in this paragraph — even a slight deviation can lead to incompatibility.
As for the working length of the tape / sheet, it inevitably turns out to be less than the total (for sheets — not much, for tapes — quite significantly). However a longer tape/sheet often has a greater working length; however, with the same general dimensions of the nozzle, its working size in different tools may be different; it is indicated in the item "Sole Size" (see below).
Belt / sheet width
The width of the belt or sheet for which the grinder is designed.
Working nozzles in the form of sheets are used in units with a vibrational principle of operation, in the form of tapes — respectively, in tape ones (for more details on both, see "Type"). Anyway, this paragraph does not indicate the working width of the tape / sheet (that is, the width of the surface adjacent to the material being processed), but the total — that is, the size of the nozzle itself. This size in itself determines only the compatibility of the grinder with certain sheets / tapes. At the same time, clamp-like fasteners (see “Sheet fastening”), used in most classic vibrating instruments, usually fix the sheet only in front and behind, so that in such instruments the restrictions on width are not as strict as, for example, on length: the sheet may be somewhat wider, and somewhat narrower than the nominal size. However, such possibilities should be clarified separately, and for a full guarantee it is better to clarify whether a particular machine allows deviations in width. The situation is similar with delta sanders, where Hook-and-loop is traditionally used: a discrepancy in width technically does not prevent the installation of a nozzle, but not all models allow this. As for the band tools, they may allow the installation of a narrower band — but not a wider one.
As for the working width, it, usually, corresponds to the general one, or (in some vibration models) differs slightl...y from it. Anyway, the working width is given under Sole Size (see below).
Working nozzles in the form of sheets are used in units with a vibrational principle of operation, in the form of tapes — respectively, in tape ones (for more details on both, see "Type"). Anyway, this paragraph does not indicate the working width of the tape / sheet (that is, the width of the surface adjacent to the material being processed), but the total — that is, the size of the nozzle itself. This size in itself determines only the compatibility of the grinder with certain sheets / tapes. At the same time, clamp-like fasteners (see “Sheet fastening”), used in most classic vibrating instruments, usually fix the sheet only in front and behind, so that in such instruments the restrictions on width are not as strict as, for example, on length: the sheet may be somewhat wider, and somewhat narrower than the nominal size. However, such possibilities should be clarified separately, and for a full guarantee it is better to clarify whether a particular machine allows deviations in width. The situation is similar with delta sanders, where Hook-and-loop is traditionally used: a discrepancy in width technically does not prevent the installation of a nozzle, but not all models allow this. As for the band tools, they may allow the installation of a narrower band — but not a wider one.
As for the working width, it, usually, corresponds to the general one, or (in some vibration models) differs slightl...y from it. Anyway, the working width is given under Sole Size (see below).
Pad size
The size of the sole provided in the tool.
This parameter is indicated for two types of grinders — most models with a vibrational principle of operation (namely, for vibration and delta grinders, as well as multifunctional ones), as well as belt units. For more information about both, see "Type", here we note that the sole as such is only available in vibrating tools — in tape tools, we are talking about the size of the section of the tape that is in direct contact with the material. Simply put, the size of the sole is the size of the working surface of the machine.
The larger the size of this surface, the more performant the machine, the better it is suitable for large volumes of work. And tape models, we recall, are used mainly for processing oblong parts and during operation they are usually located across such a part; so that for such machines it is highly desirable that the length of the tape be not less than the width of the surface to be treated — otherwise, accurate processing can be quite difficult. On the other hand, a large sole inevitably affects the dimensions, weight, and most often the cost of the tool, besides, it can make it difficult to use in cramped conditions. Yes, and consumables for such soles (sheets, tapes) require larger ones — and, accordingly, more expensive. So when choosing according to this indicator, it is worth considering the features of the intended application; if you wish, you can refer to special sources for detailed r...ecommendations on this matter.
Also note that for multifunctional models (see "Type") in this paragraph, several options are most often given — for each specific sole. However, there are models where only one set of sizes is indicated. This can either mean that both main vibration nozzles (rectangular and triangular) have the same dimensions in length and width — or that the data is indicated for a non-removable triangular sole, on which a larger rectangular one is put on if necessary. Such details can often be clarified directly from the photographs of the goods, in extreme cases — from the manufacturer's documentation.
This parameter is indicated for two types of grinders — most models with a vibrational principle of operation (namely, for vibration and delta grinders, as well as multifunctional ones), as well as belt units. For more information about both, see "Type", here we note that the sole as such is only available in vibrating tools — in tape tools, we are talking about the size of the section of the tape that is in direct contact with the material. Simply put, the size of the sole is the size of the working surface of the machine.
The larger the size of this surface, the more performant the machine, the better it is suitable for large volumes of work. And tape models, we recall, are used mainly for processing oblong parts and during operation they are usually located across such a part; so that for such machines it is highly desirable that the length of the tape be not less than the width of the surface to be treated — otherwise, accurate processing can be quite difficult. On the other hand, a large sole inevitably affects the dimensions, weight, and most often the cost of the tool, besides, it can make it difficult to use in cramped conditions. Yes, and consumables for such soles (sheets, tapes) require larger ones — and, accordingly, more expensive. So when choosing according to this indicator, it is worth considering the features of the intended application; if you wish, you can refer to special sources for detailed r...ecommendations on this matter.
Also note that for multifunctional models (see "Type") in this paragraph, several options are most often given — for each specific sole. However, there are models where only one set of sizes is indicated. This can either mean that both main vibration nozzles (rectangular and triangular) have the same dimensions in length and width — or that the data is indicated for a non-removable triangular sole, on which a larger rectangular one is put on if necessary. Such details can often be clarified directly from the photographs of the goods, in extreme cases — from the manufacturer's documentation.
Sheet fixing
The method of fastening the sanding sheet, provided for in a grinder with a vibrational principle of operation (vibration, delta sanding, multifunctional — see "Type").
— Clamps. Usually, this option provides a pair of clips located in the front and back of the sole. It can only be implemented in rectangular soles — for triangular soles used in delta grinding models, such devices are not suitable. Clips are somewhat less convenient than hook-and-loop, they require both more steps to secure the sheet, and more attention during these steps. On the other hand, this type of fastening is much more reliable than Hook-and-loop, it perfectly fixes the sheets and can be used even in the most powerful machines that work with high loads. In addition, compared to Hook-and-loop, clips are as versatile as possible (from the inside, the sanding sheet can have any surface — the main thing is that it fits in size) and more durable (practically do not lose their properties over time). And thanks to the durable materials that are usually used in the design, the likelihood of breakage of such a latch is minimal. Therefore, it is this option that is used in the vast majority of classic vibration machines — with rectangular soles.
— Hook-and-loop. Fastening according to the principle of a classic Hook-and-loop fastener: the sole has a surface with a set of microscopic hooks, and the underside of the sanding sheet is made of felt, for the fibers of which the hooks are hooked. Th...e main advantage of this option is that it has no restrictions on the form. So it is Hook-and-loop that is used in all modern delta sanders and multifunctional models (see "Type"), although in the second case they can be combined with clips. In addition, “sticking” and “unsticking” sheets on such a sole is easier and faster than changing nozzles in clamps. On the other hand, the reliability of fixation is somewhat lower than that of clamps; and over time, the effectiveness of Hook-and-loop can be further reduced due to wear on the hooks (the felt surface of sanding sheets also wears out a lot, but the working side of the sheet usually becomes unusable much earlier than the fastening one). In addition, this method of fastening is only suitable for a certain type of sheets — with a reverse surface for Hook-and-loop. In light of all this, this option is extremely rare in vibratory machines with rectangular soles — more often a combination with clamps is used, and most of these models use only clamps. Although in some situations, Hook-and-loop may be the best option for such a tool — for example, if high loads are not expected, and it is desirable to change the sheets without unnecessary delays.
— Hook-and-loop and clips. A combination of both options described above in one tool. The specific features of this combination directly depend on the type of grinder. So, in multifunctional models, different types of latches are usually provided on different removable soles: clips on a rectangular one, Hook-and-loop on a “delta”. Thus, each version of the working surface uses the method of fastening that is optimally suitable for it. And in vibration models, this design makes the machine as versatile as possible, allowing you to use sheets with it for both Hook-and-loop and clips.
— Clamps. Usually, this option provides a pair of clips located in the front and back of the sole. It can only be implemented in rectangular soles — for triangular soles used in delta grinding models, such devices are not suitable. Clips are somewhat less convenient than hook-and-loop, they require both more steps to secure the sheet, and more attention during these steps. On the other hand, this type of fastening is much more reliable than Hook-and-loop, it perfectly fixes the sheets and can be used even in the most powerful machines that work with high loads. In addition, compared to Hook-and-loop, clips are as versatile as possible (from the inside, the sanding sheet can have any surface — the main thing is that it fits in size) and more durable (practically do not lose their properties over time). And thanks to the durable materials that are usually used in the design, the likelihood of breakage of such a latch is minimal. Therefore, it is this option that is used in the vast majority of classic vibration machines — with rectangular soles.
— Hook-and-loop. Fastening according to the principle of a classic Hook-and-loop fastener: the sole has a surface with a set of microscopic hooks, and the underside of the sanding sheet is made of felt, for the fibers of which the hooks are hooked. Th...e main advantage of this option is that it has no restrictions on the form. So it is Hook-and-loop that is used in all modern delta sanders and multifunctional models (see "Type"), although in the second case they can be combined with clips. In addition, “sticking” and “unsticking” sheets on such a sole is easier and faster than changing nozzles in clamps. On the other hand, the reliability of fixation is somewhat lower than that of clamps; and over time, the effectiveness of Hook-and-loop can be further reduced due to wear on the hooks (the felt surface of sanding sheets also wears out a lot, but the working side of the sheet usually becomes unusable much earlier than the fastening one). In addition, this method of fastening is only suitable for a certain type of sheets — with a reverse surface for Hook-and-loop. In light of all this, this option is extremely rare in vibratory machines with rectangular soles — more often a combination with clamps is used, and most of these models use only clamps. Although in some situations, Hook-and-loop may be the best option for such a tool — for example, if high loads are not expected, and it is desirable to change the sheets without unnecessary delays.
— Hook-and-loop and clips. A combination of both options described above in one tool. The specific features of this combination directly depend on the type of grinder. So, in multifunctional models, different types of latches are usually provided on different removable soles: clips on a rectangular one, Hook-and-loop on a “delta”. Thus, each version of the working surface uses the method of fastening that is optimally suitable for it. And in vibration models, this design makes the machine as versatile as possible, allowing you to use sheets with it for both Hook-and-loop and clips.
More features
— Soft start. A function that provides smooth spin-up of the grinder motor, with relatively little acceleration. This is achieved by limiting the starting current. The soft start serves two purposes: it prevents the tool from jerking, reducing the risk of letting it go, and it reduces the load on the mains, avoiding large power surges.
— Speed controller. Possibility to limit the maximum number of engine revolutions. In fact, this function is a smooth speed control; it is useful when full speed is not required, such as delicate jobs where accuracy is more important than productivity. Note that this function is found in all types of grinders — including those with a vibration or belt principle of operation (see "Type"): even in such units, the vibration frequency or belt speed is determined precisely by engine speed.
— Maintain momentum. The ability to maintain a given number of revolutions regardless of the load on the working nozzle. This function is implemented by automation, which accordingly adjusts the engine power — increases it with an increase in load and reduces it with a decrease. A constant rotation speed has a positive effect on both the quality of processing and the service life of the working nozzles and the entire tool.
— Protection against accidental activation. The ability to block the power button,...preventing it from being accidentally pressed. This allows you to safely move the switched off tool from place to place during work breaks without fear of accidentally turning it on. Also, this feature will be useful if there are small children nearby. And in some models, the protection can also turn on when the power is turned off (for example, network failures) — thanks to this, when the power is restored (which can happen at the most unexpected moment), the tool will not start working without the user's command.
— Electronic engine protection. A safety system that turns off the tool when the load on it increases critically. The specific way in which such protection works may vary. For example, in some models, it turns off the engine with a sharp increase in the load on the working nozzle — for example, when the disc is jammed in the material; this avoids sharp jerks of the tool, its breakage, disc destruction and other unpleasant consequences. In other models, protection reacts to overheating or a critical excess of current. There are also tools that combine both of these options.
— Brushless motor. The presence of a brushless motor in an electric grinder (see "Power supply"). Such motors are considered more advanced than traditional collector motors (with brushes): they are more economical in terms of energy consumption, less noisy and do not spark, which is important in conditions of increased fire danger. The main disadvantage of brushless motors is their high cost.
— Engine brake. A special brake that stops the rotation of the motor shaft after power is turned off. Thanks to such a device, after finishing work, you do not need to wait until the grinder nozzle finishes rotating by inertia — the rotation stops in just a couple of seconds (whereas without a brake, this may take several tens of seconds). This not only increases the safety of work, but also has a positive effect on the service life of the tool.
— Safety clutch. A protective clutch that prevents damage to the engine when the load on it is significantly increased — for example, in the event of a jammed disc. Such a coupling connects the working nozzle and the motor shaft. It can be disposable or reusable: in the first case, when overloaded, the clutch is destroyed and needs to be replaced, in the second, it is disconnected, and to continue working, it is enough to connect it back.
— Backlight. This feature is definitely desirable when working in low light conditions. However, it can also come in handy in bright external light: the place of work is often in the shade (for example, from the instrument itself), and it can be difficult to work in such conditions without special lighting.
— Display. Own display, which can display various information about the operation and status of the device. Such a screen provides additional convenience and visibility, but in general this is a rather specific function that is extremely common in modern power tools.
— Synchronization with a smartphone. The ability to connect the instrument to a smartphone or other gadget (such as a tablet) via Wi-Fi or Bluetooth. Such a connection is usually used to adjust the operating parameters; doing this through a mobile application is often more convenient than through the controls on the instrument itself.
— Anti-vibration system. Damping system that reduces the level of vibrations that occur during operation. The presence of such a system has a positive effect on both the quality of work and convenience: strong vibration of the tool leads to rapid fatigue, the anti-vibration system helps to avoid this.
— Rotary main handle. The possibility of turning the main handle of the grinder around the longitudinal axis. This function is found mainly in corner models (see "Type") — it provides additional convenience, allowing you to adjust the position of the handle to the specific situation. This can be important for working in non-standard positions and hard-to-reach places.
— 3-position additional handle. An additional handle mounted on a removable mount and having three installation options: on the left (traditional option for right-handed holding of the tool), on the right (for left-handers) and on top (for specific cases — situations when you need to periodically change the grip, work in hard-to-reach places, etc.). P.). This feature provides advanced options for customizing the instrument to your own preferences. It is found mainly in corner models (see "Type").
— Keyless disk replacement. The ability to change discs in a grinder (usually an angle grinder, see "Type") without the use of keys and other additional tools. The convenience of this function is obvious: you do not need to keep the key with you all the time, make sure that it is not lost, etc. However the keyless mount is considered somewhat less reliable than the key mount, so it is rarely found in heavy professional models.
— System of fastening X-LOCK. An advanced attachment system used on some angle grinders (see "Type"), predominantly manufactured by Bosch and Makita. This system is somewhat more expensive than the traditional 22mm nut or washer mount, but has a number of advantages over it. Firstly, X-LOCK provides the simplest and fastest installation: no need to fiddle with additional parts or tools, just put the disk on the spindle and press it until it clicks; in turn, to remove the working nozzle, it is enough to press the button that turns off the latch. Secondly, you can install the nozzle with only one, correct side to the tool — the mounting design will not allow otherwise. The main disadvantage of machines with this system is incompatibility with cheaper and more common discs for a standard 22 mm mount; and equipment for X-LOCK is not yet available in every hardware store.
— Collet chuck. Special design chuck used in straight grinders (see "Type"). The clamp of such a cartridge consists of several elastic petals (usually 2 – 3), which, when tightened, are compressed, fixing the working nozzle. The main advantages of collets are the speed and convenience in changing nozzles, simple design and low cost.
— Coolant supply(coolant). Possibility of supplying coolant to the place of work. This function is found mainly in machines for stone and concrete (see "Type"), because it is for these materials that water cooling is most relevant: it not only prevents overheating, but also prevents the formation of dust. To supply water to the machine, a nozzle is provided, which is led to the working nozzle, and a pipe for connecting to a water hose.
— Connecting the dust collector. The ability to connect a container to the tool to collect dust and other contaminants that occur during operation. Such a container can be supplied with the machine, but this is not necessary, this point should be clarified separately. Anyway, the dust collector, although it does not provide one hundred percent protection against pollution, however, significantly reduces their amount and facilitates cleaning after work. Dust collectors can be both reusable and disposable.
— Speed controller. Possibility to limit the maximum number of engine revolutions. In fact, this function is a smooth speed control; it is useful when full speed is not required, such as delicate jobs where accuracy is more important than productivity. Note that this function is found in all types of grinders — including those with a vibration or belt principle of operation (see "Type"): even in such units, the vibration frequency or belt speed is determined precisely by engine speed.
— Maintain momentum. The ability to maintain a given number of revolutions regardless of the load on the working nozzle. This function is implemented by automation, which accordingly adjusts the engine power — increases it with an increase in load and reduces it with a decrease. A constant rotation speed has a positive effect on both the quality of processing and the service life of the working nozzles and the entire tool.
— Protection against accidental activation. The ability to block the power button,...preventing it from being accidentally pressed. This allows you to safely move the switched off tool from place to place during work breaks without fear of accidentally turning it on. Also, this feature will be useful if there are small children nearby. And in some models, the protection can also turn on when the power is turned off (for example, network failures) — thanks to this, when the power is restored (which can happen at the most unexpected moment), the tool will not start working without the user's command.
— Electronic engine protection. A safety system that turns off the tool when the load on it increases critically. The specific way in which such protection works may vary. For example, in some models, it turns off the engine with a sharp increase in the load on the working nozzle — for example, when the disc is jammed in the material; this avoids sharp jerks of the tool, its breakage, disc destruction and other unpleasant consequences. In other models, protection reacts to overheating or a critical excess of current. There are also tools that combine both of these options.
— Brushless motor. The presence of a brushless motor in an electric grinder (see "Power supply"). Such motors are considered more advanced than traditional collector motors (with brushes): they are more economical in terms of energy consumption, less noisy and do not spark, which is important in conditions of increased fire danger. The main disadvantage of brushless motors is their high cost.
— Engine brake. A special brake that stops the rotation of the motor shaft after power is turned off. Thanks to such a device, after finishing work, you do not need to wait until the grinder nozzle finishes rotating by inertia — the rotation stops in just a couple of seconds (whereas without a brake, this may take several tens of seconds). This not only increases the safety of work, but also has a positive effect on the service life of the tool.
— Safety clutch. A protective clutch that prevents damage to the engine when the load on it is significantly increased — for example, in the event of a jammed disc. Such a coupling connects the working nozzle and the motor shaft. It can be disposable or reusable: in the first case, when overloaded, the clutch is destroyed and needs to be replaced, in the second, it is disconnected, and to continue working, it is enough to connect it back.
— Backlight. This feature is definitely desirable when working in low light conditions. However, it can also come in handy in bright external light: the place of work is often in the shade (for example, from the instrument itself), and it can be difficult to work in such conditions without special lighting.
— Display. Own display, which can display various information about the operation and status of the device. Such a screen provides additional convenience and visibility, but in general this is a rather specific function that is extremely common in modern power tools.
— Synchronization with a smartphone. The ability to connect the instrument to a smartphone or other gadget (such as a tablet) via Wi-Fi or Bluetooth. Such a connection is usually used to adjust the operating parameters; doing this through a mobile application is often more convenient than through the controls on the instrument itself.
— Anti-vibration system. Damping system that reduces the level of vibrations that occur during operation. The presence of such a system has a positive effect on both the quality of work and convenience: strong vibration of the tool leads to rapid fatigue, the anti-vibration system helps to avoid this.
— Rotary main handle. The possibility of turning the main handle of the grinder around the longitudinal axis. This function is found mainly in corner models (see "Type") — it provides additional convenience, allowing you to adjust the position of the handle to the specific situation. This can be important for working in non-standard positions and hard-to-reach places.
— 3-position additional handle. An additional handle mounted on a removable mount and having three installation options: on the left (traditional option for right-handed holding of the tool), on the right (for left-handers) and on top (for specific cases — situations when you need to periodically change the grip, work in hard-to-reach places, etc.). P.). This feature provides advanced options for customizing the instrument to your own preferences. It is found mainly in corner models (see "Type").
— Keyless disk replacement. The ability to change discs in a grinder (usually an angle grinder, see "Type") without the use of keys and other additional tools. The convenience of this function is obvious: you do not need to keep the key with you all the time, make sure that it is not lost, etc. However the keyless mount is considered somewhat less reliable than the key mount, so it is rarely found in heavy professional models.
— System of fastening X-LOCK. An advanced attachment system used on some angle grinders (see "Type"), predominantly manufactured by Bosch and Makita. This system is somewhat more expensive than the traditional 22mm nut or washer mount, but has a number of advantages over it. Firstly, X-LOCK provides the simplest and fastest installation: no need to fiddle with additional parts or tools, just put the disk on the spindle and press it until it clicks; in turn, to remove the working nozzle, it is enough to press the button that turns off the latch. Secondly, you can install the nozzle with only one, correct side to the tool — the mounting design will not allow otherwise. The main disadvantage of machines with this system is incompatibility with cheaper and more common discs for a standard 22 mm mount; and equipment for X-LOCK is not yet available in every hardware store.
— Collet chuck. Special design chuck used in straight grinders (see "Type"). The clamp of such a cartridge consists of several elastic petals (usually 2 – 3), which, when tightened, are compressed, fixing the working nozzle. The main advantages of collets are the speed and convenience in changing nozzles, simple design and low cost.
— Coolant supply(coolant). Possibility of supplying coolant to the place of work. This function is found mainly in machines for stone and concrete (see "Type"), because it is for these materials that water cooling is most relevant: it not only prevents overheating, but also prevents the formation of dust. To supply water to the machine, a nozzle is provided, which is led to the working nozzle, and a pipe for connecting to a water hose.
— Connecting the dust collector. The ability to connect a container to the tool to collect dust and other contaminants that occur during operation. Such a container can be supplied with the machine, but this is not necessary, this point should be clarified separately. Anyway, the dust collector, although it does not provide one hundred percent protection against pollution, however, significantly reduces their amount and facilitates cleaning after work. Dust collectors can be both reusable and disposable.
In box
— Additional handle. Separate handle for a second hand. Theoretically, such equipment could make the instrument more comfortable to hold with two hands. However, in fact, the absence of an additional handle is often not critical: many tools without it are either intended to be held in one hand (like some straight grinders, see "Type"), or have other adaptations for a second hand (for example, a ledge on the body). So to answer the question of whether you need an additional handle, you need to take into account the type and size of the grinder, as well as the features of the planned work. Also note that by default such a handle is designed for right-handers, and the possibility of its use with left-handed holding should be specified separately.
— Charger(charger). A device for charging the battery in a grinder with the appropriate type of power supply (see "Power supply"). Also in this paragraph, a specific model of the charger is usually specified. In itself, the presence of a "charger" in the kit eliminates the need to look for and buy it separately; at the same time, such a charger is optimally suited to at least the “native” battery, and often also to other compatible batteries. And data on the model will be useful, first of all, in case the complete charger is lost or fails and you have to buy the same or similar one instead. In addition, knowing the charger model, you can find detailed data abo...ut it and evaluate its characteristics and features (compatibility with various batteries, additional functions, etc.). At the same time , the “without charger” package is also very popular — see below for more on it.
— No charger. This feature is indicated exclusively for battery models (cars with other types of power supply — see "Power Source" — by definition do not have a charger, there is no need to specify this point for them). The meaning of this configuration is that modern grinders most often use standard batteries, which are also suitable for other power tools of the same brand and are designed, respectively, for standard “chargers”. Thus, if the "household" already has a battery tool, then the charger for it may be suitable for the grinder, you will not need to overpay for the second copy of the charger. And even if the charger is not available, usually, it can be purchased separately without much difficulty (moreover, some tools also allow you to choose the most suitable model of such a device from several options).
— Case / bag included. The presence of a case or bag for storing and transporting the tool. The case is a suitcase and is made of durable material, usually there is a place not only for the machine itself, but also for working attachments and other additional accessories. The bag is soft, which allows it to be compactly folded when there is no need for it. Check the availability of a case or bag immediately before buying.
— Dust collector. Container for collecting dust and other contaminants that occur during operation. See "Advanced — Connecting the dust box" for details.
— Barbell. A long rod significantly expands the "radius" of the tool: with such equipment, you can reach a great height, process a large area without rearranging the platform or other stand, etc. Such features are relevant primarily when processing walls, so the vast majority of grinders with rods in the kit are wall grinders(see "Type").
— Charger(charger). A device for charging the battery in a grinder with the appropriate type of power supply (see "Power supply"). Also in this paragraph, a specific model of the charger is usually specified. In itself, the presence of a "charger" in the kit eliminates the need to look for and buy it separately; at the same time, such a charger is optimally suited to at least the “native” battery, and often also to other compatible batteries. And data on the model will be useful, first of all, in case the complete charger is lost or fails and you have to buy the same or similar one instead. In addition, knowing the charger model, you can find detailed data abo...ut it and evaluate its characteristics and features (compatibility with various batteries, additional functions, etc.). At the same time , the “without charger” package is also very popular — see below for more on it.
— No charger. This feature is indicated exclusively for battery models (cars with other types of power supply — see "Power Source" — by definition do not have a charger, there is no need to specify this point for them). The meaning of this configuration is that modern grinders most often use standard batteries, which are also suitable for other power tools of the same brand and are designed, respectively, for standard “chargers”. Thus, if the "household" already has a battery tool, then the charger for it may be suitable for the grinder, you will not need to overpay for the second copy of the charger. And even if the charger is not available, usually, it can be purchased separately without much difficulty (moreover, some tools also allow you to choose the most suitable model of such a device from several options).
— Case / bag included. The presence of a case or bag for storing and transporting the tool. The case is a suitcase and is made of durable material, usually there is a place not only for the machine itself, but also for working attachments and other additional accessories. The bag is soft, which allows it to be compactly folded when there is no need for it. Check the availability of a case or bag immediately before buying.
— Dust collector. Container for collecting dust and other contaminants that occur during operation. See "Advanced — Connecting the dust box" for details.
— Barbell. A long rod significantly expands the "radius" of the tool: with such equipment, you can reach a great height, process a large area without rearranging the platform or other stand, etc. Such features are relevant primarily when processing walls, so the vast majority of grinders with rods in the kit are wall grinders(see "Type").
Power source
— Network. Mains power is suitable for tools of any power, and the continuous operation time is almost unlimited (as long as there is mains voltage and the tool does not overheat). The disadvantages of this option are the dependence on sockets and the presence of a network cable, which limits mobility and can get tangled under the arms, creating inconvenience during work. However, these moments are relatively rarely critical, so most modern grinders use mains power.
— Battery. This type of power makes the tool as autonomous as possible, allowing you to work even in the absence of sockets and easily move from place to place. In addition, the absence of a network cable is also a serious advantage. On the other hand, a cordless tool is noticeably more expensive and heavier than a “network” one similar in characteristics; the power of such grinders is relatively small — otherwise too bulky and expensive batteries would be required; and the battery life is limited, and after the depletion of the energy reserve, you have to take a long break to recharge the battery. So this option makes sense to consider only in cases where mobility and lack of wire are critical.
— Pneumo (compressor). Connection to the compressor supplying air using a hose. On the one hand, this option is not very convenient, because it requires the compressor itself; and the hose restricts freedom of movement and can create othe...r inconveniences when working. On the other hand, pneumatic machines themselves are simpler, cheaper, lighter and more reliable than electric ones, they are less prone to heat and are better suited for long continuous work. In addition, such a tool is indispensable in some specific conditions — for example, at high humidity, when there is an increased risk of electric shock, or in an explosive environment, when sparking in mechanisms is unacceptable.
— Battery. This type of power makes the tool as autonomous as possible, allowing you to work even in the absence of sockets and easily move from place to place. In addition, the absence of a network cable is also a serious advantage. On the other hand, a cordless tool is noticeably more expensive and heavier than a “network” one similar in characteristics; the power of such grinders is relatively small — otherwise too bulky and expensive batteries would be required; and the battery life is limited, and after the depletion of the energy reserve, you have to take a long break to recharge the battery. So this option makes sense to consider only in cases where mobility and lack of wire are critical.
— Pneumo (compressor). Connection to the compressor supplying air using a hose. On the one hand, this option is not very convenient, because it requires the compressor itself; and the hose restricts freedom of movement and can create othe...r inconveniences when working. On the other hand, pneumatic machines themselves are simpler, cheaper, lighter and more reliable than electric ones, they are less prone to heat and are better suited for long continuous work. In addition, such a tool is indispensable in some specific conditions — for example, at high humidity, when there is an increased risk of electric shock, or in an explosive environment, when sparking in mechanisms is unacceptable.
Battery in set
Most modern power tools use replaceable batteries, and then this paragraph indicates the number of such batteries. It is worth saying that the most popular version of this configuration nowadays is 2 batteries. It is relatively inexpensive and at the same time allows you to minimize, if not eliminate interruptions in work: while one battery is in use, the second can be charged, and when the charge is exhausted, the roles change. In this regard , single battery kits are not particularly common: they are mainly entry-level tools that are not designed for long-term use and allow interruptions to recharge the battery.
In addition, quite a few modern cordless tools come in a configuration colloquially known as a “carcass” — namely, no batteries at all. This option is relevant mainly for two cases: if the user wants to choose a power source separately, at his own discretion, or if such a source is already on the farm. Regarding the second option, it is worth noting that many large manufacturers use universal batteries suitable for different types of branded power tools. So a battery, for example, from a previously purchased jigsaw or drill may well be compatible with a grinder of the same company.
As for non-removable batteries, this is a rather rare and specific option. Such tools are as compact as possible, but the batteries t...hemselves cannot be quickly changed — so you will inevitably have to take breaks for charging during work. Therefore, this method of supply is typical for low-power instruments. In them, small size is more important than a long period of continuous operation, in addition, a low capacity allows you to achieve good battery life even with small sizes (and, accordingly, capacity) of batteries.
In addition, quite a few modern cordless tools come in a configuration colloquially known as a “carcass” — namely, no batteries at all. This option is relevant mainly for two cases: if the user wants to choose a power source separately, at his own discretion, or if such a source is already on the farm. Regarding the second option, it is worth noting that many large manufacturers use universal batteries suitable for different types of branded power tools. So a battery, for example, from a previously purchased jigsaw or drill may well be compatible with a grinder of the same company.
As for non-removable batteries, this is a rather rare and specific option. Such tools are as compact as possible, but the batteries t...hemselves cannot be quickly changed — so you will inevitably have to take breaks for charging during work. Therefore, this method of supply is typical for low-power instruments. In them, small size is more important than a long period of continuous operation, in addition, a low capacity allows you to achieve good battery life even with small sizes (and, accordingly, capacity) of batteries.
Battery platform
The name of the battery platform supported by the instrument.
The battery platform is a battery standard used to keep different power tools and other equipment of the same brand (pressure cleaners, flashlights, etc.) could use the same power supplies and chargers for them. This eliminates the need to use a different battery and “charger” for each individual device, and also makes it easier to find compatible power sources: instead of checking a list of compatible batteries, you just need to make sure that the battery you select is from a supported platform. (However, models of compatible batteries can also be specified in the specifications — see below for more details).
Batteries of the same platform mainly differ from each other in terms of capacity — and, accordingly, cost.
The battery platform is a battery standard used to keep different power tools and other equipment of the same brand (pressure cleaners, flashlights, etc.) could use the same power supplies and chargers for them. This eliminates the need to use a different battery and “charger” for each individual device, and also makes it easier to find compatible power sources: instead of checking a list of compatible batteries, you just need to make sure that the battery you select is from a supported platform. (However, models of compatible batteries can also be specified in the specifications — see below for more details).
Batteries of the same platform mainly differ from each other in terms of capacity — and, accordingly, cost.
Battery voltage
The operating voltage of the battery in the grinder with the appropriate power supply (see "Power supply"). The more powerful the tool, the higher the battery voltage, usually. At the same time, this parameter is usually selected in such a way as to optimally match the characteristics of a particular model; therefore, in fact, voltage data may be required only when looking for a spare or additional battery.
Battery capacity
The capacity of the battery that is equipped with the tool with the appropriate type of power (see “Power source”).
Theoretically, the capacity directly determines how long the tool can work on one charge. However, in practice, this parameter is rather weakly related to real autonomy. Firstly, the charging time depends not only on the battery capacity, but also on the energy consumption (power) of the tool itself; secondly, the actual amount of stored energy is determined not only by the capacity in ampere hours, but also by the voltage in volts. So you can only compare tools with similar power and the same battery voltage in terms of battery capacity.
Note that some models of grinders allow replacing the “native” battery with another, including a higher capacity one; some manufacturers even produce universal batteries suitable for different types of power tools under a given brand.
Theoretically, the capacity directly determines how long the tool can work on one charge. However, in practice, this parameter is rather weakly related to real autonomy. Firstly, the charging time depends not only on the battery capacity, but also on the energy consumption (power) of the tool itself; secondly, the actual amount of stored energy is determined not only by the capacity in ampere hours, but also by the voltage in volts. So you can only compare tools with similar power and the same battery voltage in terms of battery capacity.
Note that some models of grinders allow replacing the “native” battery with another, including a higher capacity one; some manufacturers even produce universal batteries suitable for different types of power tools under a given brand.
Battery type
The model of a regular battery allows you to find out in more detail its characteristics, and also helps you understand what devices it is like and which one should be purchased in case of a replacement due to a malfunction or, if necessary, buy another similar one.
Compatible batteries
Battery models that the device of the corresponding type is compatible with (see "Power source"). This information will be useful in cases where the battery(ies) must be purchased separately, for example, if the tool does not come with a battery at all, if you need to supplement the original package, or if the existing battery has failed.
Charging time
The time required to fully (from zero to 100%) charge the battery in the battery device (see "Power supply"); this refers to the complete battery and standard charger. The shorter this time, the shorter the breaks will have to be done for recharging; however, higher capacity batteries inevitably take longer to charge than smaller ones. This can be compensated by the use of fast charging technologies, but they, in turn, affect the cost of the tool.
Noise level
Approximate noise level generated by the grinder during operation. Note that this indicator is quite approximate, because. actual "loudness" can vary markedly depending on the type and shape of the material being processed, the surface it is placed on, and other circumstances. In addition, different manufacturers may use different measurement methods. Nevertheless, this indicator makes it possible to assess how comfortable this or that model is in operation and whether special hearing protection is required.
The most “quiet” modern grinders give out about 65 dB — this is comparable to loud speech at a distance of 1 m; in the loudest, the noise level reaches 107 dB — this is the volume of an industrial workshop.
The most “quiet” modern grinders give out about 65 dB — this is comparable to loud speech at a distance of 1 m; in the loudest, the noise level reaches 107 dB — this is the volume of an industrial workshop.
Power cord length
The length of the network cable can tell you how far from the outlet you can operate the device. Therefore, for domestic use, it is more relevant to choose models with a short cord, for construction work or use in production, in the garage a longer cable is better.
Weight
The total weight of the grinder; for battery models (see "Power Source"), usually, it is indicated without taking into account the battery.
This indicator has two meanings. On the one hand, light weight has a positive effect on manoeuvrability and reduces fatigue during work — especially when processing vertical surfaces and ceilings, as well as in other situations where the tool has to be held on weight. On the other hand, for grinders with a vibrational principle of operation (see "Type"), used for processing horizontal surfaces, a significant weight is considered optimal: it allows the tool to fit closer to the material being processed, and also contributes to stability and retention. So when choosing such a model by weight, it is worth considering the features of its intended application.
This indicator has two meanings. On the one hand, light weight has a positive effect on manoeuvrability and reduces fatigue during work — especially when processing vertical surfaces and ceilings, as well as in other situations where the tool has to be held on weight. On the other hand, for grinders with a vibrational principle of operation (see "Type"), used for processing horizontal surfaces, a significant weight is considered optimal: it allows the tool to fit closer to the material being processed, and also contributes to stability and retention. So when choosing such a model by weight, it is worth considering the features of its intended application.