Bosch GOP 300 SCE Professional 0601230502
Multi Tool Blades210
 |
Price from £8.29 up to £10.95
Compare prices6→Compare prices and buy Dremel Accessory 9901 Tungsten Carbide Cutter Bit with Square Tip - 32 mm
Multifunctional Cutter Bit: This Dremel accessory is ideal for engraving, carving, shaping, smoothing and material removal
Materials: Use on hardened steel, stainless steel, cast iron, nonferro more→us metals, ceramics, plastics, hardwoods and other hard materials
Strong: Made from Tungsten Carbide for use on hard materials
Cutting diameter of 32 mm, Recommended maximum speed of 30,000 RPM
Fits with all Dremel Multi-/Rotary tools or other 3,2mm shank size Multi-/Rotary tools
Materials: Use on hardened steel, stainless steel, cast iron, nonferro more→us metals, ceramics, plastics, hardwoods and other hard materials
Strong: Made from Tungsten Carbide for use on hard materials
Cutting diameter of 32 mm, Recommended maximum speed of 30,000 RPM
Fits with all Dremel Multi-/Rotary tools or other 3,2mm shank size Multi-/Rotary tools
 |
Price from £5.49
Compare prices3→Compare prices and buy Fein Sanding Sheets for Sanding Fingers 80g Pack of 20
• Sanding sheets for sanding fingers • With Velcro rapid attachment, fully bonded with artificial resin, high sanding capacity, corundum. For use on: wood, metal, soldered joints, fibreglass more→, plastic, paint, filler, leather. Pack of 20 Specifications Grain: 80 No. in pack: 20 pcs
 |
Price from £5.49
Compare prices3→Compare prices and buy Dremel 512S EZ SpeedClic 2 Piece Finishing Buffing Wheel Set
Finishing abrasive buffs medium + course and Finishing abrasive buffs fine. For precise and delicate material removal on metal, glass, wood and plastic. The flexible material enables to work on tight more→and irregularly shaped areas. These buffs can be used with mandrels 402 as well as SC402. EZ SpeedClic. Quick, Easy, Keyless.Specifi
 |
Price from £6.95
Compare prices3→Compare prices and buy Dremel 454 Chainsaw Grinding Stone 4.8mm Pack of 3
Precision ground for quick, easy sharpening of chain saw blades. Use with Dremel Chainsaw sharpening attachment No. 1453SpecificationsShank diameter: 3,2 mm Working diameter: 4,8 mm Pack of 3
 |
Price from £16.54 up to £22.95
Compare prices6→Compare prices and buy Bosch Pt Expert Carbide Sanding Plate Multimaterial Avz90rt2 Segmented Saw Blade 2608900045
Expert Sanding Plate For Long Life Sanding Multi Material:- Small but tough sanding jobs to remove old material and prepare surfaces for working can be almost impossible with conventional sanders or b more→y hand. Even if you can reach the surface, these jobs destroy sandpaper. With the EXPERT Sanding Plate however, you can reach corners and sand difficult materials with your oscillating multitool.- The coarse, open grains of the RT2 (grit size 20) are best for removing mortar behind tiles, removing carpet adhesive, or rough shaping of wood. The RT4 (grit size 40) is best for removing thick paint but can also tackle mortar and glue if required. The RT6 (grit size 60) is the paint specialist, while …
 |
Price from £12.30 up to £15.95
Compare prices5→Compare prices and buy Bosch AIZ 28 SC Universal Starlock Oscillating Multi Tool Soft Material Joint Cutter 28mm Pack of 1
Reliable Cutting of Soft Materials - The Starlock AIZ 28 SC cutter provides reliable and easy cutting of various soft materials. The sharp blade is ideal for slicing through pliable materials. It feat more→ures a razor-like continuous cutting edge on both blade sides along with a sharpened tip for effortlessly piercing and slicing through flexible materials. The rigid scraper body made from HCS (high carbon steel) cuts through soft materials easily as its wide blade will not flex or warp mid-cut. This cutter is designed for use on soft expansion joints, putty materials like sealing compounds, insulation materials and soft joint materials. It is suitable for use with all Starlock, Starlock Plus and …
 |
Price from £6.95
Compare prices3→Compare prices and buy Dremel 428 Carbon Steel Wire Wheel Brush 19mm Pack of 2
Versatile brush for removing rust and corrosion, polishing metal surfaces, deburring and blending surface junctures or cleaning electrical components.Spec
 |
Price from £4.99 up to £6.49
Compare prices4→Compare prices and buy Dremel 953 Aluminium Oxide Grinding Stone 6.4mm Pack of 3
Use on metals, castings,welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding of most materials.SpecificationsShank diameter: 3,2 mm Working diameter: 6,4 mm Pack of 3
 |
Price from £8.95
Compare prices3→Compare prices and buy Faithfull MFTC65 OIS Oscillating Multi Tool Carbide Grit Radial Saw Blade 65mm Pack of 1
This Faithfull saw blade has a broad range of applications with its carbide grit edge. It will cut out damaged tile joint and cuts grooves in plaster, porous concrete and similar construction material more→s. Compatible with many multi-function oscillating power tools.Additiona
 |
Price from £9.95
Compare prices3→Compare prices and buy Dremel 196 High Speed Drum Cutter 5.6mm Pack of 2
High speed cutters can be used for shaping, hollowing, grooving, slotting, making tappered holes in soft metals, plastics and woods.Specifications:Shank diameter - 3.2 mmWorking diameter - 5.6 mmPack of 2
 |
Price from £7.99 up to £8.95
Compare prices4→Compare prices and buy Dremel 420 Heavy Duty Cut Off Wheel 24mm Pack of 20
For slicing and cutting in metal,wood and plastic. Cut-off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. Fiberglass reinforced cut-off wheels (456, 426, 426B) a more→re for tough applications. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them. Use Dremel cut-off wheels with mandrel 402.Specificati
 |
Price from £15.99 up to £21.95
Compare prices5→Compare prices and buy Dremel 2615054265 Oscillating Multitool Sandpaper
Wood Cutting Wheels are both carbide cutting wheels for slicing, cutting and shaping on woods and laminates. Ideal for short cuts in wooden floors to make room for e.g. heating pipes or electronics or more→model making. The carbide coating makes this wheel very durable.We recommend using a (two-handed) golf grip when using this accessory, and using the right angle attachment when a cut is hard to reach. To keep the disc life as long as possible, do not apply excessive pressure and do not exceed the RPM limits. This cut-off disk can be used on different wood types, like chipboard, hardwood, softwood, laminate, fiberboard, or even on plastics and laminates. Do not use them on metals.Recommen
Important!
Compatibility with specific Multi Power Tools models should be checked with manager of online store immediately before purchase.
Compatibility with specific Multi Power Tools models should be checked with manager of online store immediately before purchase.
