DeWALT DWE4377
Cutting Discs238
 |
Flexovit Flap Discs are ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The angles of the flaps mean more abrasive makes contact with the workpiece than a more→conventional fibre disc which increases productivity. Suitable for use on Metal, wood and paint.Size: 125mm Bore: 22mmGrit: 80Additional Information:&bu
 |
Rough Grit Sanding (P50 and Rougher) - The X-LOCK Backing Pad Hard is ideal for rough grit sanding (P50 and rougher). It features an extra-rigid multi-groove construction that maximises contact pressu more→re between disc and workpiece, enabling heavy-duty, highly aggressive sanding applications. For convenient work, the pad´s angled surface provides an ergonomic grinding position. Manufactured from fibreglass reinforced thermostable plastic, it resists even highest temperatures and breakage. It is suitable for use with X-LOCK angle grinders. X-Lock clip is included. Changing backing pads is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
The Tiles Used In Modern Construction Are Often Large, Very Hard And Expensive. Cutting Them To A High Standard Every Time Is Therefore Crucial Yet Difficult. The Expert Hardceramic Tile-Cutting Disc more→Uses Diamond Technology And A Range Of Design Features To Deliver The Best Results Consistently, Even In The Hardest Ceramics. The Bosch Expert Hardceramic X-Lock Diamond Tile Cutting Disc Offers The Best Cut In Hard Tiles. You Can Be Confident Of Achieving A Professional Finish On Every Job With This Diamond Cutting Disc.Features: - Clean, High Quality Cutting With Bosch Diamond Technology.- Chip-Free Cut With Purpose-Designe
 |
The Faithfull Turbo Cut Diamond Blade has been designed to offer excellent performance levels and a faster cut than standard sintered segmented blades. Perfect for a wide range of materials, this blad more→e excels in very hard materials such as hard concrete, class A engineering bricks, 65-100 Newton clay paviours, hard flint aggregates, reinforced concrete lintels, kerbs, hard concrete paving slabs, some clay products, granite and hard slate.Blade Diameter: 125mmBore Size: 22.2mmSegment Height: 10mm.Additional Information:&bu
 |
Makita Comet Diamond Cutting Blade Designed for use on porcelain and hard floor tiles, can also be used for general tile cutting. Symmetrical head-geometry with centring-tip for optimised results in t more→he event of reinforcement. Ideal for use on porcelain and ceramic tiles. Features & Benefits • Designed for use on porcelain and hard floor tiles, can also be used for general tile cutting • Smooth cut • Suitable for porcelain and ceramic tile • Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement Specifications • Diameter: 125mm • Segment Height: 5mm • Bore: 22.23mm • Pack Quantity: 1
 |
Makita's B-38560 Anti-Vibration Offset Diamond Wheel features 2 small shock absorbers within the flange system. These work to absorb vibration, limiting transferred vibration to machine and end user. more→The rubber rings also reduce tapping, allowing for smooth and efficient grinding. Not compatible with the PC5000. Features and Benefits • Low vibration • Less tapping • Segmented Diamond • High efficiency Specifications • Application: Dry grinding with concrete/granit
 |
The X-LOCK Best for Ceramic Extra Clean Turbo Diamond Cutting Disc provides extra-clean cuts in porcelain. Its turbo rim is designed to achieve neat results in all kinds of hard ceramics, while the op more→timised diamond matrix delivers chip-free cuts. X-LOCK cutting discs also fit standard angle grinders. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system.Product highlights:- X-LOCK Best for Ceramic Extra Clean Turbo Diamond Cutting Discs- X-LOCK Best for Ceramic Extra Clean Turbo Diamond Cutting Disc provides extra-clean cuts in porcelain- Turbo rim for neat results in all kinds of hard ceramics- Optimised diamond matrix delivers chip-free cutsSpecificati
 |
Fast Cuts in Concrete - The Best for Concrete Diamond Cutting Disc provides fast cuts in concrete. Its laser-welded diamond cutting segments with a 15-mm height are robust for rapid cuts. It features more→speed stripes that are integrated in the diamond segment and minimise side friction, enabling high-speed work. Additionally, its optimised diamond matrix delivers the fastest cuts. Use this disc for cutting all sorts of concrete. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Fast Cuts in Concrete • Best for Concrete Diamond Cutting Disc provides fast cuts in concrete • Laser-welded diamond cutting segments (15-mm height) are robust for rapid …
Wire & Cup Brushes316
 |
Price from £21.58 up to £24.95
Compare prices4→Compare prices and buy Lessmann 0.5 Steel Wire Knot Wheel Brush 125mm 22.2mm Bore
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, ru more→bber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 125mm.Width: 14mm.Bore: 22.2mm.Wire Gauge: 0.50.Wire Type: Steel.Max RPM: 12,500/min.Addi
 |
Price from £37.19 up to £40.95
Compare prices4→Compare prices and buy Lessmann X Lock Non Sparking Stainless Steel Wire Cup Brush 85mm X-Lock
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Stainless Steel Knot Cup Brush 85mm Non Spark
 |
14.81Buy!
£
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting and the removal of slag rust scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.This Lessmann Knot Cup Brush has the following specification: Diameter: 65mmThread: M10 x 1.25Wire Gauge. 0.50Wire Type. SteelMax. R.P.M. 12 500PTDLES482213
 |
Price from £4.49
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Brass Wire Brush 50mm 6mm Shank
Fine Finish on Steel - The Wire Cup Brush delivers an extra-fine surface finish. This Wire Cup Brush is fitted with brass-coated crimped wire for light-to-medium
 |
Price from £3.83 up to £5.72
Compare prices9→Compare prices and buy Sealey Wire Cup Brush Ø75mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. • ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SCB75Technical Specification:D
 |
Price from £5.77 up to £7.49
Compare prices6→Compare prices and buy Makita D-66070 Wire Brush Set for Drill (3 Piece)
Makita D-66070 Wire Brush Set for Drill (3 Piece)
The Makita D-66070 is a 3 Piece Wire Brush Set designed to be used with power tools to remove rust and paint from metal objects.Feature
more→> - Cup type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- Wheel type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- End type: light duty for working on hard to reach areas (pipes and profiles).
Specificatio
- Part Number: D-66070
- Number of Pieces: 3
The Makita D-66070 is a 3 Piece Wire Brush Set designed to be used with power tools to remove rust and paint from metal objects.Feature
more→> - Cup type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- Wheel type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- End type: light duty for working on hard to reach areas (pipes and profiles).
Specificatio
- Part Number: D-66070
- Number of Pieces: 3
 |
Price from £2.86 up to £4.01
Compare prices7→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 50mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø50mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 50mm width and a 6mm sh more→aft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Width: ø50mm. • Maximum Speed: 4500rpm. • Model No. SFBS50Technical Specification:D
 |
Price from £16.25 up to £24.99
Compare prices5→Compare prices and buy Faithfull Wire Cup Brush Knot 75Mm Xlock Ss, Multi FAIWBT75SSXL
X-LOCK Twist Knot Wire Brush for heavy-duty applications. Ideal for removing rust, paint and varnish. Use on stainless steel, aluminium and non-ferrous metal surfaces. Using standard wire brushes on s more→tainless steel can contaminate and cause the material to rust. The X-LOCK quick change system ensures a fast, reliable and effective one click change between tools when used with a compatible angle grinder. Wire Type: High Tensile Twisted Stainless Steel (304)Diameter: 75mmFitting: X-LOCKWire Size: 0.5mmMax. RPM: 12500 Features: Use on stainless steel, aluminium and non-ferrous metal X-LOCK quick change system for fast change between tools X-LOCK quick change system for fast change between tools …
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
