Einhell Classic TC-JS 18 Li (2x2.5Ah)

Bushing washers supplied to reduce bore diameter for certain makes and models of saw. The bushing washers must be pressed or glued into blade body of Trend Craft Pro sawblades only. Loose bushing more→washers/rings must not be used. Specifications • Dia Metric: 30 • Sawbore: 25.4 • Sawbore Imperial: 1 • Saw Plate Thick Metric: 1.3

These quality Bosch metal jigsaw blades fit all jigsaws with a T-Shank clamping system The Bosch T123X (2608638473) Jigsaw Blades come in a pack of 5 and are designed for cutting thin to thick sheet m more→etals between 1.5-10 mm, pipes + profiles, including aluminium. (BIM) blades contain a combination of high-carbon steel and high-speed steel. The T123X Progressor for Metal Jigsaw Blade is breakproof and delivers fast straight cuts in thick and thin metal. Featuring a tooth geometry with a progressively increasing tooth pitch, the blade enables work in materials with a wide range of densities. Additionally, the blade's milled, wavy-set teeth are designed for rapid cuts in sheet metal. Made from …

For use with jigsaws with T-Shank clamping systems. The T 218 A Basic for Metal Jigsaw Blade delivers curved cuts in metal. Its milled, wavy-set teeth are ideal for cuts without special requirements. more→Additionally, its narrow blade width is optimised for curved cuts. The fully hardened, high-grade high-speed steel blade material is appropriate for standard-strength, non-perforated metal sheets. The blade's very fine progressive tooth pitch (1.1-1.5 mm) enables the blade to cut a variety of thin solid metal sheets with 1-3 mm thickness. T 218 A HSS, wavy set, milled Thin sheet metals (1-3 mm), especially for curve cuts • Curved Cuts in Solid Sheet Metal • T 218 A Basic for Metal Jigsaw …

This FAITLCUT300W is a replacement Tungsten Carbide cutting wheel to fit Faithfull Dual Rail Tile Cutters. FAITLCUT300W fits FAITLC300 300mm Tile Cutter. FAITLC400 300mm Tile Cutter. FAITLC600 300mm T more→ile Cutter.

Fine Cuts - The Starlock AIZ 10 AB blade produces fine cuts in wood and non-hardened metal. It has a narrow 10 mm cutting blade width to allow for filigree work. The blade’s sturdy mounting system red more→uces wobbling to enable hairline cuts by using direct power transmission. It is intended for filigree adjustment work on non-ferrous profiles and plunge cuts in plasterboard. This blade cuts wood and non-hardened metal, soft plastic and plastic laminate panels. Use this product with all Starlock, Starlock Plus and Starlock Max power tools as well as common multi-tools. When cutting non-hardened metals and abrasive materials, the BIM (bi-metal) combination of an HCS (high carbon steel) blade and HS…

DeWalt HCS (High Carbon Steel) blades are engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics. Down cutting blade; suitable for wood, plywood, chipbo more→ard and fibre board up to 40mm thick. Ideal for splinter free cuts in laminates. Specifications • Overall Length: 100 mm • Working Length: 73 mm • Tooth Pitch: 2.5 mm • Max DOC: 40 mm