Interskol UShM-115/900 41.1.0.00
Cutting Discs359
 |
The Standard for Stone Diamond Cutting Disc provides reliable cuts in all types of stone. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality standards that are ensur more→ed by the Bosch diamond competence centre in Switzerland. Use this disc for cutting all sorts of stones. Pack of 1 • Reliable Cuts in All Types of Stone • Standard for Stone Diamond Cutting Disc provides reliable cuts in all types of stone • Optimised diamond matrix delivers solid results • High-quality standards are ensured by Bosch diamond competence centre in Switzerland Specifications: Diameter mm: 115 Bore diameter mm: 22.23 Cutting width mm: 1,6 Segment height mm: 10 …
 |
Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depresse more→d centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the …
 |
The Standard for Concrete Diamond Cutting Disc provides reliable cuts in concrete. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality standards. Bosch's diamond comp more→etence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting concrete. Pack of 1 • Reliable Cuts in Concrete • Standard for Concrete Diamond Cutting Disc provides reliable cuts in concrete • Optimised diamond matrix delivers solid results thanks to the disc's high-quality standards • Bosch´s diamond competence centre in Switzerland ensures consistent quality Specifications: Diameter mm: 115 Bore diameter mm: 2…
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasi
 |
The X571 Best for Metal is compatible with angle grinders. The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia al more→umina/semi-fria
 |
The X571 Best for Metal is compatible with angle grinders. The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia al more→umina/semi-fria
 |
The Norton Clipper Classic Ceramic Diamond Blade provides a clean cut in most ceramic products, glazed tiles, etc. For use with angle grinders.
 |
Lasts up to 50x longer than a Bi-Metal blade in tough materialsCuttin
Wire & Cup Brushes210
 |
Price from £3.00 up to £4.54
Compare prices6→Compare prices and buy Draper Flat Top Decarbonizing Wire Brush, 26m
Brassed crimped steel wire brush with flat trim. 6mm diameter shanks. Brush length 25mm. Display packed.
 |
Price from £8.67 up to £11.11
Compare prices6→Compare prices and buy Draper Twisted Wire Wheel, 75mm
Heavy duty wheel with integral 6mm shank. For descaling, deburring, removing rust, adhesive residues and preparing/cleaning welding seams. Display packed.
 |
Price from £5.49
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush 60mm 12mm 6mm Shank LES451161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mmWire Height: 20mmOverall Length: 60mmWire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £3.49 up to £4.89
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Ø75mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB75Technical Specification:D
 |
Price from £8.95
Compare prices3→Compare prices and buy Faithfull Stainless Steel Crimped Wire Cup Brush 70mm 6mm Shank WBSI70
This Faithfull Wire Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. It can be used in industrial power tools at higher speeds. Type: Cup more→Maximum speed: 12,000/min.Face diameter: 70 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm Stainless steel Conforms to ISO 9001. and DIN EN1083-1 and 2Additional Information:&bu
 |
Price from £6.95 up to £7.76
Compare prices5→Compare prices and buy Sealey Twist Knot Wire Flat Brush Ø75mm with Ø6mm Shaft
• Twist knot flat wire wheel.• Stainless steel.• Shaft: ø6mm. • Width: ø75mm.• Max Speed: 12000rpm.Twist knot flat wire wheel, ø75mm width and a ø6mm shaft.• Twist knot flat wire w more→heel. • Stainless Steel. • Shaft: ø6mm. • Width: ø75mm. • Max Speed: 12000rpm. • Model No. TKFBS75Technica
 |
Price from £4.49 up to £5.58
Compare prices6→Compare prices and buy Sealey Wire Cup Brush Ø75mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. • ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SCB75Technical Specification:D
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Crimped Wire Cup Brush 50mm 6mm Shank WBS50
This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) more→shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type: Cup.The FAIWBS50 Wire Cup Brush has the following specifications: Face Diameter: 50 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
