The Bosch EXPERT S522EHM is a carbide-tipped reciprocating saw blade engineered specifically for cutting thin stainless steel sheet and thin-wall stainless steel profiles — materials that rapidly destroy conventional blades. Bosch Carbide Technology integrates exceptionally hard carbide material directly into the tooth structure, producing a blade... morecapable of lasting up to 50 times longer than the standard Bosch S922EF blade in tough materials. The teeth are ground to a fine 18 TPI geometry, enabling clean, controlled cuts through thin stainless steel without tearing or snagging. Suitable for stainless steel sheets between 2–4 mm and stainless steel profiles up to 50 mm diameter, the blade is also rated for glass fibre reinforced plastic and epoxy composites up to 50 mm. For best results, Bosch recommends reducing the stroke rate, disabling pendulum action, and using coolant throughout the cut. Compatible with all S-shank reciprocating saws, this blade is well suited to metalworkers, plumbers, installers, and contractors regularly working with stainless steel or hard composite materials on site. Features and Benefits: • Lasts up to 50x longer than the Bosch S922EF blade in tough materials • Bosch Carbide Technology — carbide integrated into the tooth structure for exceptional durability • 18 TPI extra-fine tooth geometry for clean, accurate cuts in thin stainless steel • Suitable for stainless steel sheets, stainless profiles, and glass fibre reinforced plastic/epoxy • Fits all S-shank reciprocating saws Specifications: Total length: 115 mm (4½ in) Width: 19 mm Thickness: 1 mm Tooth pitch: 18 TPI Tooth spacing: 1.4 mm Recommended material thickness: 1.5–4 mm Stainless steel sheets: 2–4 mm Stainless steel profiles (diameter):
Bosch EXPERT S522EHM Thin Tough Metal Cutting Reciprocating Sabre Saw Blades 115mm Pack of 1 2608900359
The Bosch EXPERT S522EHM is a carbide-tipped reciprocating saw blade engineered specifically for cutting thin stainless steel sheet and thin-wall stainless steel profiles — materials that rapidly destroy conventional blades. Bosch Carbide Technology integrates exceptionally hard carbide material directly into the tooth structure, producing a blade... morecapable of lasting up to 50 times longer than the standard Bosch S922EF blade in tough materials. The teeth are ground to a fine 18 TPI geometry, enabling clean, controlled cuts through thin stainless steel without tearing or snagging. Suitable for stainless steel sheets between 2–4 mm and stainless steel profiles up to 50 mm diameter, the blade is also rated for glass fibre reinforced plastic and epoxy composites up to 50 mm. For best results, Bosch recommends reducing the stroke rate, disabling pendulum action, and using coolant throughout the cut. Compatible with all S-shank reciprocating saws, this blade is well suited to metalworkers, plumbers, installers, and contractors regularly working with stainless steel or hard composite materials on site. Features and Benefits: • Lasts up to 50x longer than the Bosch S922EF blade in tough materials • Bosch Carbide Technology — carbide integrated into the tooth structure for exceptional durability • 18 TPI extra-fine tooth geometry for clean, accurate cuts in thin stainless steel • Suitable for stainless steel sheets, stainless profiles, and glass fibre reinforced plastic/epoxy • Fits all S-shank reciprocating saws Specifications: Total length: 115 mm (4½ in) Width: 19 mm Thickness: 1 mm Tooth pitch: 18 TPI Tooth spacing: 1.4 mm Recommended material thickness: 1.5–4 mm Stainless steel sheets: 2–4 mm Stainless steel profiles (diameter):
The Bosch EXPERT S522EHM is a carbide-tipped reciprocating saw blade engineered specifically for cutting thin stainless steel sheet and thin-wall stainless steel profiles — materials that rapidly destroy conventional blades. Bosch Carbide Technology integrates exceptionally hard carbide material directly into the tooth structure, producing a blade... morecapable of lasting up to 50 times longer than the standard Bosch S922EF blade in tough materials. The teeth are ground to a fine 18 TPI geometry, enabling clean, controlled cuts through thin stainless steel without tearing or snagging. Suitable for stainless steel sheets between 2–4 mm and stainless steel profiles up to 50 mm diameter, the blade is also rated for glass fibre reinforced plastic and epoxy composites up to 50 mm. For best results, Bosch recommends reducing the stroke rate, disabling pendulum action, and using coolant throughout the cut. Compatible with all S-shank reciprocating saws, this blade is well suited to metalworkers, plumbers, installers, and contractors regularly working with stainless steel or hard composite materials on site. Features and Benefits: • Lasts up to 50x longer than the Bosch S922EF blade in tough materials • Bosch Carbide Technology — carbide integrated into the tooth structure for exceptional durability • 18 TPI extra-fine tooth geometry for clean, accurate cuts in thin stainless steel • Suitable for stainless steel sheets, stainless profiles, and glass fibre reinforced plastic/epoxy • Fits all S-shank reciprocating saws Specifications: Total length: 115 mm (4½ in) Width: 19 mm Thickness: 1 mm Tooth pitch: 18 TPI Tooth spacing: 1.4 mm Recommended material thickness: 1.5–4 mm Stainless steel sheets: 2–4 mm Stainless steel profiles (diameter):
The Bosch EXPERT S522EHM is a carbide-tipped reciprocating saw blade engineered specifically for cutting thin stainless steel sheet and thin-wall stainless steel profiles — materials that rapidly destroy conventional blades. Bosch Carbide Technology integrates exceptionally hard carbide material directly into the tooth structure, producing a blade capable of lasting up to 50 times longer than the standard Bosch S922EF blade in tough materials. The teeth are ground to a fine 18 TPI geometry, enabling clean, controlled cuts through thin stainless steel without tearing or snagging. Suitable for stainless steel sheets between 2–4 mm and stainless steel profiles up to 50 mm diameter, the blade is also rated for glass fibre reinforced plastic and epoxy composites up to 50 mm. For best results, Bosch recommends reducing the stroke rate, disabling pendulum action, and using coolant throughout the cut. Compatible with all S-shank reciprocating saws, this blade is well suited to metalworkers, plumbers, installers, and contractors regularly working with stainless steel or hard composite materials on site. Features and Benefits: • Lasts up to 50x longer than the Bosch S922EF blade in tough materials • Bosch Carbide Technology — carbide integrated into the tooth structure for exceptional durability • 18 TPI extra-fine tooth geometry for clean, accurate cuts in thin stainless steel • Suitable for stainless steel sheets, stainless profiles, and glass fibre reinforced plastic/epoxy • Fits all S-shank reciprocating saws Specifications: Total length: 115 mm (4½ in) Width: 19 mm Thickness: 1 mm Tooth pitch: 18 TPI Tooth spacing: 1.4 mm Recommended material thickness: 1.5–4 mm Stainless steel sheets: 2–4 mm Stainless steel profiles (diameter):
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
