Japan Racing JR36 8x18/5x100 ET20 DIA74,1

LMA wheel studs are for converting hubs that usually use wheel bolts to attach a wheel. Once fitted the wheel stud protrudes from the hub so you can fit the wheel quicker and easier, the wheel being h more→eld in place with wheel nuts. Available in a choice of lengths and several thread diameters and pitches to suit most applications.The stud has a stop to prevent the stud being wound in too farAllen key hex to allow easy tightening without gripping the stud and causing thread damageThe hub side has a taper on the end of the thread to make cross threading very unlikely10.9 Carbon steel construction, Ideal for Motorsport use, and other demanding applications

Grayston Conversion Studs are ideal for converting bolt hole wheel fitments to stud and nut wheel fitments.Available as a straightforward stud conversion with same thread sizes on each end, and also w more→ith different thread pitches for thread pitch conversions. The stated length is for the complete stud, not the open thread length.Priced per stud

These Mazda studs are historically difficult to source, but Hub Buddies have been extensively resourcing to bring you the Mazda wheel studs you need.Hub Buddies Mazda wheel stud 14.73mm spline diamete more→r 73mm long under head. M12x1.5 ThreadThese Wheel Studs are extended versions which can be used with the Hub Buddies Mazda 13mm spacers. They are designed to be used where studs are fitted originally - they are not meant as conversion studding.Priced Per Stud.Some Mazda's differ - Please remove a front and rear stud and check sizes before ordering.applications:Mazda MX5 NA Rear From Chassis no 133233Mazda MX5 NB RearMazda MX3 FrontMazda 323 Chassis No BJ FrontMazda 323 GT / GTR RearMazda Chassis