Makita 3709
Diamond Core Bits & Milling Cutters1895
 |
This thirty five piece cutter set contains a range of popular Tungsten Carbide Tipped cutters for a variety of applications. 1/2- inch shank diameter. For softwood, hardwood, chipboard, plywood and more→MDF. Excellent value for money. Supplied in aluminium carry case. Specifications • Shank Diameter: 1/2 • Pack Qty: 35 piece Contents: 1 x Single flute 3.2mm x 12.7mm cut 1 x Straight 6.3mm x 19mm cut 1 x Straight 9.5mm x 25mm cut 1 x Straight 12.7mm x 19mm cut 1 x Straight 12.7mm x 25mm cut 1 x Straight 19mm x 19mm cut 1 x Pierce and trim 6.3x 18mm 1 x 45 Degree v groove x 12.7mm dia 2 x Dovetail 12.7mm and 14.3mm dia 2 x Cove R3.2mm & R6.35mm 1 x Long series cove R6.35mm x 18mm …
 |
Produces an elegant edge mould, or a shallow panel effect when routing on its full width. Specifications • Shank Diameter: 1/2 • Dia Metric: 20 • Cut Length Metric: 15 • Overall L more→ength Metric: 53 • Radius 1 Metric: 6
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 12 mm • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 19 • Overall Length Metric: 63
 |
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/2 • Dia Metric: 52 • Cut Length more→Metric: 25 • Overall Length Metric: 82 • Angle: 45
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 25 • Overall Length Metric: 65
 |
Two flute for fine finish. Specially ground for cutting acrylic. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 20 • Overa more→ll Length Metric: 63
 |
For architraves, framing as well as edge moulding. Specifications • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Dia2 Metric: 26 • Cut Length Metric: 38 &bull more→; Overall Length Metric: 87 • Bearing Dia Metric: 16 • Radius 1 Metric: 7 • Radius 2 Metric: 5
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 8 mm • Dia Metric: 8 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 68.5
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
