Makita GA050GM201
Cutting Discs231
 |
Faithfull Abrasive Jumbo Flap Discs contain up to 40% more abrasive than standard flap discs, providing a considerably longer working life. Manufactured from long lasting Zirconia Alumina. Resin bonde more→d for extra strength and durability. Designed for use with most angle grinders of the corresponding size. Ideal for use on wood, metal, plastic and stainless steel.Diam Size 127mmGrade Fine (80 Grit)Bore. 22.23mmAddition
 |
Makita Comet Diamond Cutting Blade Designed for use on porcelain and hard floor tiles, can also be used for general tile cutting. Symmetrical head-geometry with centring-tip for optimised results in t more→he event of reinforcement. Ideal for use on porcelain and ceramic tiles. Features & Benefits • Designed for use on porcelain and hard floor tiles, can also be used for general tile cutting • Smooth cut • Suitable for porcelain and ceramic tile • Symmetrical head-geometry with centring-tip for optimised results in the event of reinforcement Specifications • Diameter: 125mm • Segment Height: 5mm • Bore: 22.23mm • Pack Quantity: 1
 |
The X-LOCK Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, which copes with de more→manding applications while delivering good results. Moreover, the disc's precision-manuf
 |
Up to 3x more precise than a standard ceramic diamond discThe tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore crucia more→l yet difficult. The Expert HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics.Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut.The Bosch Expert …
 |
Makita's A36N grinding discs were designed to out-perform all other aluminium grinding discs on the market. The unique bond structure is a combination of grit impregnated with a substance called stear more→ic acid. This specially formulated mix ensures lubrication is present between the grit and work surface at raised emperatures. Due to the low melting point of aluminium, problems can arise once a grinding surface reaches melting point. The useful substance present within the bond structure acts as a lubricant to reduce friction between grit and workpiece. Lower friction = less heat build up. By reducing the heat element, there is less possibility of melted aluminium sticking to the grinding disc …
 |
The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia A more→lumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.1 x Faithfull Zirconia Abrasive Jumbo Flap Disc ZA120 125mm. 120 grit is suitable for smooth grinding. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces. For use with a 125mm angle grinder. Max. Speed: 80m/s 12,200 RPM.Additional Information:&bu
 |
The Standard for Metal Cutting Disc cuts reliably through metal. Its aluminium oxide disc is designed for general use with metal. Use this disc for cutting metal. Bosch cutting discs comply with the m more→aximum safety requirements, such as EN 12413. It is compatible with angle grinders.Straig
 |
continuous diamond saw 1a1r 125x1,2x22,23 dct. for ceramic tiles, ceramic stones, etc. tyrolitSpecifications:- Weight: 0,1520 KG
Wire & Cup Brushes207
 |
Price from £4.95 up to £5.85
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 75mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø75mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 75mm width and a 6mm sh more→aft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Diameter: ø75mm. • Maximum Speed: 4500rpm. • Model No. SFBS75Technical Specification:D
 |
Price from £11.81 up to £13.95
Compare prices5→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set (6 Piece)
• Set includes a 25mm wire end brush, 75mm wire cup brush, and three wire wheel brushes (50, 75, 100mm) • Designed for light to medium-duty work and delivers rapid stock removal from a wide variety of more→surfaces • Hardened dipped brassed steel wire • Strong construction with crimping action • Suitable for cleaning, deburring and surface preparation • Fitted with a non-slip 6.35mm hex shank • Compatible with most drill drivers and drills with a 13mm chuckThis set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance&hell
 |
Price from £2.49
Compare prices3→Compare prices and buy Faithfull Flat End Crimped Wire Brush 12mm 6mm Shank WBSI12
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12 Wire End Brush has the following specifications: Type: Flat End. Face diameter: 12 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel.Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £4.49 up to £5.77
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Ø100mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB100Technical Specification:D
 |
Price from £6.49 up to £7.76
Compare prices4→Compare prices and buy Sealey Wire Brush Set 3pc Brassed
• Suitable for use with power tools up to the maximum rated speed (4500rpm).• Shaft: ø6mm.• Contents: Brushes; ø50mm Wire Cup, ø50mm Flat Wire, ø25mm Decarbonising/C
 |
Price from £8.49 up to £11.11
Compare prices6→Compare prices and buy Draper Twisted Wire Wheel, 75mm
Heavy duty wheel with integral 6mm shank. For descaling, deburring, removing rust, adhesive residues and preparing/cleaning welding seams. Display packed.
 |
Price from £5.49
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush 60mm 12mm 6mm Shank LES451161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mmWire Height: 20mmOverall Length: 60mmWire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £5.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Inox Steel Wire Brush 50mm 6mm Shank 2608622117
The Wire Cup Brush provides a good fine surface finish. It is fitted with crimped wire for light-to-medium
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
