Makita PO5000C
Cutting Discs100
 |
DeWalt's Extreme Runtime series of accessories were designed in conjunction with the Flexvolt range and have been optimised for use with cordless power tools.
 |
• Aluminium oxide flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø125/22mm.
 |
Excellent Lifetime - The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-fr
 |
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjus
 |
Faithfull Abrasive Jumbo Flap Discs contain up to 40% more abrasive than standard flap discs, providing a considerably longer working life. Manufactured from long lasting Zirconia Alumina. Resin bonde more→d for extra strength and durability. Designed for use with most angle grinders of the corresponding size. Ideal for use on wood, metal, plastic and stainless steel.Diam Size 127mmGrade Fine (80 Grit)Bore. 22.23mmAddition
 |
Reilable Performance in Stone - The standard for stone cutting disc cuts reliably in stone. It features a good silicon carbide and resin blade specifically designed for work on stone. The product is i more→ntended for work on stone. For use with Bosch angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reilable Performance in Stone • Standard for Stone cutting disc cuts reliably in stone • The silicon carbide and resin blade is specifically designed for work on stone Specifications Specification: C 30 S BF Diameter: 125mm Bore size: 22,23mm Thickness: …
 |
Designed for cutting metal with angle grinders, these Stanley cutting discs have a depressed centre so the cutting edge is offset from the nut - this allows for better access in tight spaces. Features more→and Benefits • Compatible with standard angle grinders • Depressed centre: prevents the nut from causing an obstruction and allows access in tight spaces Specifications • Disc Diameter: 125mm • Bore: 22mm • Thickness: 3mm • Pack Quantity: 1
 |
Flexovit Flap Discs are ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The angles of the flaps mean more abrasive makes contact with the workpiece than a more→conventional fibre disc which increases productivity. Suitable for use on Metal, wood and paint.Size: 125mm Bore: 22mmGrit: 40.Additional Information:&bu
Abrasive Wheels & Belts4668
 |
9.05Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Sanding Disc / For Angle Grinder / Aluminium / Grit 150 / Sanding Form Round / Disc Diameter 125 mm
 |
Lasts up to 100x longer than standard sandpaper - Small but tough sanding jobs to remove old material and prepare surfaces for working can be almost impossible with conventional sanders or by hand. Ev more→en if you can reach the surface, these jobs destroy sandpaper. With the EXPERT Sanding Plate however, you can reach corners and sand difficult materials with your oscillating multitool. Using Bosch Carbide Technology, grits of the hardest metal are robustly fixed to the surface. This sharp grit remains fully effective over its long lifespan because you can clean it with a solvent. The EXPERT Sanding Plate is designed for multiple materials and users. The coarse, open grains of the RT2 (grit size …
 |
Comfortable Sanding of Round Materials - The Starlock AUZ 70 G profile sander provides comfortable sanding of round material surfaces. Its plate features a hook-and-loop-t
 |
15.07Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Sanding Disc / Metal / Quantity 1 Piece / Sanding Form Round
 |
10.26Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Grinding Disc / Sanding Form Round / Disc Diameter 125 mm
 |
Expert C470 115 mmx50 m G80 Sandpaper Roll.Specifications:- Measurements: 115mm×50m- Grit: 80
 |
13.49Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Abrasive Sleeve / Grit 40 / Sanding Form Round
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
